Skip to the content
2 layers46 × 20 mmHand pnp, the printed circuit board in 3D

Small connection board for handheld Pick n Place machine

Size
46 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
6
Pads
29
Tracks, vias
56, 12
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Nov 2019
Updated
28 Nov 2019

Overview

Hand pnp is an open-source printed circuit board by Duckle29, from the Duckle29/hand_pnp_connecter repository on GitHub. It is a 2-layer board of 46 × 20 mm with 16 parts on 6 nets, routed with 56 tracks and 12 vias.

It is built around the FDN339AN. Its parts include 5 connectors, 2 diodes, 1 resistor, 1 transistor and 1 switch.

Main components

1

README

readme.md

Hand Pick n Place glue board

This is just a small board I use to connect all the parts for my hand-vacuum pick and place tool. It connects a 12v vacuum pump, a 12v solenoid, a foot-switch, power-switch and power supply in a neat way.

top_render bot_render

Parts

16
QtyValueFootprintReferences
21N4007Diode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD1, D2
2LOGOgraphics:kiwi10mmG***, G***
110kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1
112v inConnector_BarrelJack:BarrelJack_Wuerth_6941xx301002J3
1FDN339ANPackage_TO_SOT_SMD:SOT-23Q1
1MotorConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1SolenoidConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ1
1foot_switchConnector_Audio:Jack_3.5mm_CUI_SJ-3524-SMT_HorizontalJ4
1padTestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mmJ2
1power swConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalSW1

The 12 most common of 16 parts.

Similar boards

  • 4 layers65 × 52 mmProtogenControllerV1, the printed circuit board in 3D

    ProtogenControllerV1

    coelacant1/Protogen-Electronics

    SmartMatrix SmartLED Shield breakout for Protogen hardware

    77 parts8GPL-3.0
  • 2 layers17.8 × 52 mmKicad project, the printed circuit board in 3D

    Kicad project

    Duckle29/Dual-optical-endstop

    A board with dual optical endstops, meant to allow for greater homing speeds for large machines

    16 parts1
  • 2 layers86.7 × 97.3 mmPulsr panel, the printed circuit board in 3D

    Pulsr panel

    Duckle29/pulsr

    A simple tiny PCB for handling the high peak currents of periodically firing a solenoid

    231 parts1MIT
  • 2 layers86.4 × 41.9 mmRpi shutdown v0, the printed circuit board in 3D

    Rpi shutdown v0

    Duckle29/RPi-power-controller

    A power controller board, meant to softly shutdown a raspberry pi, before removing power completely from a machine.

    19 partsMIT
  • 2 layers30 × 62 mmWiFIR, the printed circuit board in 3D

    WiFIR

    Duckle29/WiFIR

    A WiFi connected IR blaster to control heatpumps

    34 partsBSD-3-Clause
  • 2 layers60 × 62 mmPower monitor, the printed circuit board in 3D

    Power monitor

    Hal9k-dk/Access-System

    Files for the different parts of Hal9ks access systems for different tools.

    21 parts
  • 2 layers88 × 53 mmPcb, the printed circuit board in 3D

    Pcb

    WiFIR/pcb

    The design files for the WiFIR PCB

    40 partsBSD-3-Clause
  • 2 layers64.6 × 29.8 mmLevel shifter, the printed circuit board in 3D

    Level shifter

    Smoothieware/Smoothieboard2

    Hardware files for the Smoothieboard v2, and extension boards

    61 parts71

Questions

How big is the Hand pnp PCB?

It measures 46 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hand pnp use?

16 parts, built around the FDN339AN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hand pnp KiCad files?

From the Duckle29/hand_pnp_connecter repository on GitHub, at the commit this page was made from: the board is hand_pnp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hand pnp design in my own project?

Its repository states no licence, so its author keeps all rights: ask Duckle29 before reusing the design.