

Outtake controller 2026
For any embedded systems and PCB related projects.
- Size
- 120 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 23
- Pads
- 104
- Tracks, vias
- 281, 32
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Feb 2026
- Updated
- 9 Jul 2026
Overview
Outtake controller 2026 is an open-source printed circuit board by Drexel-Robotics, from the Drexel-Robotics/LunaboticsElectrical2026 repository on GitHub. It is a 2-layer board of 120 × 100 mm with 40 parts on 23 nets, routed with 281 tracks and 32 vias.
It is built around the L298N, LM2576HVS-12 and IRLZ44N. Its parts include 12 diodes, 7 connectors, 5 resistors, 3 capacitors and 3 ICs.
Main components
3L298N
Multiwatt-15-25℃~+130℃ 2 2A 4.5V~7V Bipolar Driver Overcurrent Protection、Over temperature protection Yes Multiwatt-15 Stepper Motor Driver ROHSHGSEMIStepper Motor DriverLM2576HVS-12
TO-263-5L-40℃~+125℃@(TJ) 1 12V 3A 52kHz Buck Buck Fixed TO-263-5L DC-DC Converters ROHSTECH PUBLICDC-DC ConvertersIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
README
README.mdLunabotics Electrical 2025/2026 🚀⚡
Electrical and Embedded Systems repository for the Lunabotics 2025/2026 competition.
This repository contains firmware, hardware design files, and supporting documentation for the Lunabotics robot electrical subsystem — including embedded control (STM32 + Arduino), actuator drivers, power systems, and safety systems.
📌 Overview
The LunaboticsElectrical2026 project focuses on:
- Embedded motor & actuator control
- Custom PCB design (KiCAD)
This repo will grow throughout the season as firmware and hardware designs mature.
📂 Repository Structure
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D4, D5, D7, D8, D9, D10 |
| 5 | 1935161 | outtake_controller_2026_footprints:ScrewTerminal_2Block_1935161_PhoenixContact | J2, J4, J5, J6, J7 |
| 2 | , | ||
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 2 | 1935187 | outtake_controller_2026_footprints:ScrewTerminal_4Block_1935187_PhoenixContact | J1, J3 |
| 2 | 1N5401 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D11, D12 |
| 2 | 220uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1, C3 |
| 2 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D3 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 330uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C2 |
| 1 | 330uH | Inductor_THT:L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC | L1 |
| 1 | L298N | Package_TO_SOT_THT:TO-220-15_P2.54x5.08mm_StaggerOdd_Lead4.58mm_Vertical | U1 |
| 1 | LED | LED_THT:LED_D5.0mm | D6 |
| 1 | LM2576HVS-12 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | LM78M05_TO252 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | LOGO | Lunabotics_Actuator_Controller:DrexelRoboticsLogo | G*** |
The 36 most common of 40 parts.
Similar boards
- 4 layers250 × 126 mm

- 4 layers77.8 × 47 mm

DRIVER 8323 based
M-K-O-Hybrid-open-source/Iskander
Iskander is an open source driver for BLDC motors, the hardware support Six step commutation and FOC, still in the experimental phase but it will be ready as soon as possible
72 parts12MIT - 2 layers70 × 90 mm

- 2 layers131.7 × 99.4 mm

- 2 layers64.8 × 30.5 mm

Buck
ibrahim-km/kicad-designs
PCB designs created using KiCad, including power electronics and embedded hardware projects.
8 parts - 2 layers39 × 34 mm

LM2576HV BREAKOUT MOD
NatanaelBimo/LM2576HV-BREAKOUT-MOD
LM2576HV switching regulator (12V) breakout board - Handle up to 60V input with high efficiency buck conversion. Open source hardware design.
13 parts - 2 layers154.1 × 84.2 mm

- 2 layers98.4 × 66 mm

Questions
How big is the Outtake controller 2026 PCB?
It measures 120 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Outtake controller 2026 use?
40 parts, built around the L298N, LM2576HVS-12 and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Outtake controller 2026 KiCad files?
From the Drexel-Robotics/LunaboticsElectrical2026 repository on GitHub, at the commit this page was made from: the board is hw/outtake_controller_2026/outtake_controller_2026.kicad_pcb and its schematic hw/Actuator_Controller_2026/Actuator_Controller_2026.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Outtake controller 2026 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Drexel-Robotics before reusing the design.