4 layers130 × 105 mm
HomeDeck
Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)
228 parts1
2 layers131.7 × 99.4 mm
ESP AUTOMATION
gkhnmlym/ESP_AUTOMATION- Size
- 131.7 × 99.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 89
- Pads
- 312
- Tracks, vias
- 371, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Apr 2023
- Updated
- 20 Sep 2023
Overview
ESP AUTOMATION is an open-source printed circuit board by gkhnmlym, from the gkhnmlym/ESP_AUTOMATION repository on GitHub. It is a 2-layer board of 131.7 × 99.4 mm with 92 parts on 89 nets, routed with 371 tracks and 18 vias.
It is built around the ESP32-WROOM-32D, LM2576HVS-12 and AMS1117-3.3, with the ULN2003A, 100UF/35V and DB157S among its other parts. Its parts include 19 resistors, 18 capacitors, 14 diodes, 11 connectors and 9 switches. It belongs with the ESP32 boards of this library.
Main components
8
ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
LM2576HVS-12
TO-263-5L-40℃~+125℃@(TJ) 1 12V 3A 52kHz Buck Buck Fixed TO-263-5L DC-DC Converters ROHSTECH PUBLICDC-DC Converters
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
100UF/35V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorised
DB157S
DBS-55℃~+150℃ 1.1V@1.5A 1.5A 10uA@1kV 1kV 50A Single-Phase Rectifier DBS Bridge Rectifiers ROHSbaochengBridge Rectifiers
SMAJ12CA
DO-214AC(SMA)ESD And Surge Protection (TVS/ESD)hongjiachengSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdESP_AUTOMATION
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4, J5, J6, J7, J8, J9, J10, J11 |
| 8 | Led_Green | LED_SMD:LED_0805_2012Metric | D3, D4, D5, D6, D7, D8, D9, D10 |
| 7 | 10nF | Capacitor_THT:C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 | C9, C10, C11, C12, C13, C14, C15 |
| 7 | 1K | Resistor_SMD:R_0805_2012Metric | R8, R9, R12, R13, R16, R17, R19 |
| 7 | 68R | Resistor_SMD:R_2512_6332Metric | R6, R7, R10, R11, R14, R15, R18 |
| 7 | FINDER-32.21-x000 | Relay_THT:Relay_SPDT_Finder_32.21-x000 | K1, K2, K3, K4, K5, K6, K7 |
| 7 | Varistor | Varistor:RV_Disc_D9mm_W4mm_P5mm | RV2, RV3, RV4, RV5, RV6, RV7, RV8 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R20 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C19 |
| 2 | 10uF 16V | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | SM712_SOT23 | Package_TO_SOT_SMD:SOT-23 | D2, D13 |
| 1 | 1000UF 25V SMD | Capacitor_SMD:CP_Elec_10x12.6 | C23 |
| 1 | 100nF | Capacitor_THT:C_Rect_L18.0mm_W6.0mm_P15.00mm_FKS3_FKP3 | C4 |
| 1 | 100uF-35 | Capacitor_SMD:CP_Elec_6.3x7.7 | C17 |
| 1 | 100uH | Inductor_SMD:L_12x12mm_H4.5mm | L1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 220nF | Capacitor_THT:C_Rect_L13.0mm_W8.0mm_P10.00mm_FKS3_FKP3_MKS4 | C5 |
| 1 | 22uF-50 | Capacitor_SMD:CP_Elec_6.3x7.7 | C16 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BOOT | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 1 | DB157S | GOFootprint:DB157S | D1 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | LM2576HVS-12 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U5 |
| 1 | MFS1630A - FUSE 6.3A 250V | Fuse:Fuse_Littelfuse_395Series | F1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | SMAJ12CA | Diode_SMD:D_SMB | D12 |
| 1 | SS34 | Diode_SMD:D_SMB | D11 |
| 1 | SS34 | Diode_SMD:D_SMC | D15 |
| 1 | TEMP0 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | TEMP1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | Transformer_1P_1S | GOFootprint:ASLAN 151112 | T1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ULN2003A | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Varistor | Varistor:RV_Disc_D12mm_W5mm_P7.5mm | RV1 |
Similar boards
- 2 layers78.2 × 28.8 mm
Roller blinds
Czubixx/roller-blinds-cc2652
A custom DIY modification for internal window roller blinds. The project automates standard blinds using a high-torque worm gear motor, integrated into a custom 3D-printed housing, and controlled via Zigbee (CC2652).
36 parts - 4 layers77.8 × 47 mm
DRIVER 8323 based
M-K-O-Hybrid-open-source/Iskander
Iskander is an open source driver for BLDC motors, the hardware support Six step commutation and FOC, still in the experimental phase but it will be ready as soon as possible
72 parts12MIT - 2 layers141 × 88.1 mm
- 2 layers
- 2 layers100 × 100 mm
- 2 layers123 × 87.3 mm
- 2 layers110 × 80 mm
Fd1 controller
saikoushiknalubola/firedamp-fd1
FD-1 is a wellhead node for coal mine methane drainage boreholes. It measures gas purity (NDIR CH4 and electrochemical O2), flow (ISO 5167 orifice + differential pressure) and line pressure at each borehole, throttles…
48 parts
Questions
How big is the ESP AUTOMATION PCB?
It measures 131.7 × 99.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP AUTOMATION use?
92 parts, built around the ESP32-WROOM-32D, LM2576HVS-12, AMS1117-3.3 and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP AUTOMATION KiCad files?
From the gkhnmlym/ESP_AUTOMATION repository on GitHub, at the commit this page was made from: the board is Hardware/esp_automation/esp_automation.kicad_pcb and its schematic Hardware/esp_automation/BUZZER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP AUTOMATION design in my own project?
Its repository states no licence, so its author keeps all rights: ask gkhnmlym before reusing the design.