
PCBsens
Dragonyx118/LagmaBills
A Mecanum-wheeled robot for civil protection, powered by a Raspberry Pi orchestrating two custom ESP32 PCBs, sensors, a robotic arm, and a drone companion over MQTT.

A Mecanum-wheeled robot for civil protection, powered by a Raspberry Pi orchestrating two custom ESP32 PCBs, sensors, a robotic arm, and a drone companion over MQTT. It navigates autonomously, maps its environment, avoids obstacles, and is controlled via voice AI, a MAUI app, or browser dashboard.
PCBalim is an open-source printed circuit board by Dragonyx118, from the Dragonyx118/LagmaBills repository on GitHub. It is a 2-layer board of 78.3 × 60.8 mm with 21 parts on 18 nets, routed with 7 tracks and 0 vias.
It is built around the IRF4905 and XT60PW-M. Its parts include 11 connectors, 2 capacitors, 2 resistors, 1 diode and 1 transistor. It belongs with the home automation and IoT and robots and motor control boards and the ESP32 boards of this library.
Land And Ground-to-Midair Agent — Built for Intelligent Linked Local Support
A Mecanum-wheeled robot for civil protection, powered by a Raspberry Pi orchestrating two custom ESP32 PCBs, sensors, a robotic arm, and a drone companion over MQTT. It navigates autonomously, maps its environment, avoids obstacles, and is controlled via voice AI, a MAUI app, or browser dashboard.
Presentato ad Arduino Day 2025.
| Repo | Contenuto |
|---|---|
lagmabills (questo) | Firmware ESP32, codice Python Raspberry Pi, PCB (KiCad), modelli 3D |
lagmabills-app | App companion LagmaIpp (.NET MAUI, Windows + Android) |
lagmabills-web | Sito web del progetto |
lagmabills/
├── firmware/
│ ├── firm_esp32_motori/ # Firmware PCBmotori (PlatformIO)
│ └── firm_esp32_sensori/ # Firmware PCBsensori (PlatformIO)
├── raspberry/
│ ├── odometria.py # Odometria encoder Mecanum
│ ├── occupancyGrid.py # Mappatura locale log-odds
│ ├── navigator.py # Navigazione autonoma Potential Field
│ ├── GPS.py # Lettura NEO-6M → MQTT
│ ├── myViewerServer.py # Dashboard web (HTTP + WebSocket + Leaflet)
│ ├── rasp_cam/ # Streaming camera OV5647
│ ├── odo_module/ # Moduli navigazione/mappatura aggiuntivi
│ └── Bamberg/
│ ├── ESP-IDF/ # Firmware ESP-Drone (ESP-IDF)
│ └── firm_drone/ # Bridge MQTT ↔ CRTP/UDP drone + test
├── AI_Bepo/ # Server AI vocale (wakeword, STT, LLM, TTS)
├── AmazingArm/ # Modelli e risorse braccio robotico
├── PCB/
│ ├── PCBmotori/ # KiCad — ESP32 motori (4-layer)
│ ├── PCBsensori/ # KiCad — ESP32 sensori
│ └── PCBalim/ # KiCad — distribuzione alimentazione
├── Hardware/ # Datasheet, pinout, power budget, BOM
├── models_3d/ # Modelli 3D stampabili
└── docs/
├── img/ # Foto e video dimostrativi
└── LAGMABILLS.pptx # Presentazione progetto| Componente | Descrizione |
|---|---|
| Raspberry Pi 4B (4GB) | Cervello centrale, broker MQTT, Tailscale VPN |
| PCBmotori (ESP32, 4-layer) | 4× JGA25-370 Mecanum + encoder, 2× TB6612FNG, I2C slave 0x08 |
| PCBsensori (ESP32) | 6× HC-SR04, MPU-6050, 3× TCRT5000, PCA9685 → braccio 6DOF, I2C slave 0x09 |
| PCBalim | Distribuzione alimentazione custom, 2× LiPo 3S 5500mAh |
| ESP-Drone (ESP32-S2) | Ricognizione aerea, CRTP/UDP |
| OV5647 CSI | Camera RPi, stream MJPEG |
| ReSpeaker 2-Mic HAT | WM8960, wakeword ONNX, DOA GCC-PHAT |
| NEO-6M GPS | Tracciamento posizione world frame |
| Display 7" HDMI | Faccia animata responsiva (RPi) |
| Speaker Bluetooth | Audio stereo, musica / sirene / TTS |
Dettagli completi in Hardware/BOM.xlsx e Hardware/pinoutEsp32.xlsx.
Tutto comunica via MQTT (Mosquitto su RPi, localhost:1883, accessibile anche via Tailscale).
┌─────────────────────────┐
│ Mosquitto Broker (RPi) │
└────────────┬────────────┘
┌──────────┬──────────┼──────────┬──────────┐
│ │ │ │ │
odometria occupancy navigator drone_bridge GPS
│ grid.py .py .py .py
│ │
robot/ robot/
motori/ mappa/
stato grid| Topic | Direzione | Descrizione |
|---|---|---|
robot/motori/cmd | Pi → ESP32 | Comandi movimento |
robot/motori/stato | ESP32 → Pi | Encoder + PWM |
robot/sensori/distanze | ESP32 → Pi | Distanze HC-SR04 (cm) |
robot/sensori/imu | ESP32 → Pi | Accelerometro + giroscopio |
robot/odometria | Pi → tutti | Posa X, Y, θ |
robot/mappa/grid | Pi → viewer | Occupancy grid JSON |
robot/cliff/stato | Pi → tutti | Stato sensori cliff |
robot/nav/cmd | app → Pi | start / stop / reset_goal |
robot/nav/goal | app → Pi | Goal {x, y} in world frame |
drone/cmd/rpyt | app → Pi | Roll, pitch, yaw, thrust |
# Dipendenze Python
pip install paho-mqtt numpy sounddevice onnxruntime websockets \
flask flask-socketio pyserial pynmea2 faster-whisper psutil
# Mosquitto broker
sudo apt install mosquitto mosquitto-clients
sudo systemctl enable mosquitto
# Driver ReSpeaker 2-Mic HAT
# Seguire istruzioni in Hardware/ o repo seeed-voicecard
# Avviare i moduli (esempio)
python3 raspberry/odometria.py &
python3 raspberry/occupancyGrid.py &
python3 raspberry/navigator.py &
python3 raspberry/GPS.py &
python3 raspberry/myViewerServer.py &Dashboard web: http://<ip-pi>:8080
Le cartelle in firmware/ sono progetti PlatformIO completi e pronti da compilare (pio run).
Librerie richieste (platformio.ini):
Le credenziali WiFi e broker MQTT vengono salvate in NVS e possono essere aggiornate via I2C dal Pi senza reflashare.
📦 Non vuoi compilare tu stesso? Scarica le cartelle sorgente aggiornate automaticamente ad ogni modifica dalla sezione Releases.
ReSpeaker mic → wakeword ("hey nova") → DOA GCC-PHAT (stima direzione)
→ WebSocket stream PCM16 raw
→ Whisper STT → LLM (Ollama) → Piper TTS (voce "Miro" italiano)
→ audio risposta → Speaker BluetoothPrimi test di movimento
https://github.com/Dragonyx118/LagmaBills/raw/main/docs/img/first_test_move.mp4
Prototipo in movimento
https://github.com/Dragonyx118/LagmaBills/raw/main/docs/img/proto_move.mp4
Test braccio robotico
https://github.com/Dragonyx118/LagmaBills/raw/main/docs/img/test_arm.mp4
Struttura in legno
https://github.com/Dragonyx118/LagmaBills/raw/main/docs/img/wood_body.mp4
GitHub riproduce automaticamente i link diretti
.mp4di un repository quando incollati su una riga propria nel README, mostrando un player inline.
Hippocratic License 3.0 (HL3-CL-ECO-LAW-MIL-SV) — © 2025 Dragonyx
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 12V (OFE) | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J4 |
| 1 | 12Vout(5Vin) | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J6 |
| 1 | 12Vout(for6V) | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J5 |
| 1 | 560 Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5V (OFE) | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | 5V (OFE)2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J7 |
| 1 | 6V (OFE)2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J8 |
| 1 | AlimTest | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | Ceramico 100nF (50V) | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | ConnBreakOutUSBC | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J10 |
| 1 | Elettronico 100µF (35V) | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | FUSE HOLDER (IN-OUT) | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J9 |
| 1 | IRF4905 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | USB_A (ToESPDRONE/DISPLAY) | Connector_USB:USB_A_Wuerth_61400826021_Horizontal_Stacked | J11 |
| 1 | XT60PW-M | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J1 |
The 17 most common of 21 parts.

Dragonyx118/LagmaBills
A Mecanum-wheeled robot for civil protection, powered by a Raspberry Pi orchestrating two custom ESP32 PCBs, sensors, a robotic arm, and a drone companion over MQTT.

Dragonyx118/LagmaBills
A Mecanum-wheeled robot for civil protection, powered by a Raspberry Pi orchestrating two custom ESP32 PCBs, sensors, a robotic arm, and a drone companion over MQTT.

juleswwebb/portfolio
A static engineering portfolio for https://juleswwebb.github.io/portfolio/.

jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1

MarcelMG/DIY-Soldering-Station-Controller
A soldering station controller compatible with Weller RT tips


HacklabJKL/sergei_cnc2
Second version of Hacklab's custom built CNC machine

zohebzma2-cmyk/autonomous-mower
Self-driving zero-turn mower retrofit — RTK GPS, LiDAR, cameras, on-device AI. Hardware + firmware + control software + parametric CAD.


im-alexis/Capstone-Project
Team Members: Javier Padilla, Alexis Torres, Ian Skillman, Kiet Le, Evan LeBel, Jesus Hernandez, Jaime Sanchez, Rodrigo Romero
It measures 78.3 × 60.8 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the IRF4905 and XT60PW-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dragonyx118/LagmaBills repository on GitHub, at the commit this page was made from: the board is PCB/PCBalim/PCBalim.kicad_pcb and its schematic PCB/PCBalim/PCBalim.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Dragonyx118 before reusing the design.