Skip to the content
2 layers58.4 × 20.3 mmPmods, the printed circuit board in 3D
Size
58.4 × 20.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
34
Pads
127
Tracks, vias
207, 16
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
7 May 2021
Updated
7 Nov 2024

Overview

Pmods is an open-source printed circuit board by Dolu1990, from the Dolu1990/pmod_usb_host_x4 repository on GitHub. It is a 2-layer board of 58.4 × 20.3 mm with 38 parts on 34 nets, routed with 207 tracks and 16 vias.

It is built around the SN65220DBV. Its parts include 19 resistors, 5 capacitors, 5 ICs and 5 connectors.

Main components

1

README

README.md

Important !

  • The PMOD connector is on the bottom side of the PCB in kicad, but should be solder on the top.
  • The 5V pin of the board need to be connected to your main board 5V. (the design was made during covid, when all the buckboost went out of stock XD)

Parts

38
QtyValueFootprintReferences
815KResistor_SMD:R_0603_1608MetricR2, R7, R8, R9, R14, R15, R16, R17
827Resistor_SMD:R_0603_1608MetricR3, R4, R5, R6, R10, R11, R12, R13
4150uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2, C3, C4, C5
4Ferrite_Bead_SmallInductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolderFB1, FB2, FB3, FB4
4SN65220Package_TO_SOT_SMD:SOT-23-6U2, U3, U4, U5
210KResistor_SMD:R_0603_1608MetricR1, R19
2USB_AConnector_USB:USB_A_Molex_105057_VerticalJ4, J5
1100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1
11kResistor_SMD:R_0603_1608MetricR18
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_02x06_Top_BottomConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_HorizontalJ1
1TPS20xx_sot23-5Package_TO_SOT_SMD:SOT-23-5U1
1USB_A_x2Connector_USB:USB_A_Wuerth_61400826021_Horizontal_StackedJ2

Similar boards

  • 2 layers37 × 13 mmGlassLink, the printed circuit board in 3D

    GlassLink

    glassboard-dev/gl-glasslink-hardware

    DAPLink (CMSIS-DAP) compatible hardware

    37 parts20CC-BY-SA-4.0
  • 4 layers205.5 × 152 mmLTC3, the printed circuit board in 3D

    LTC3

    psas/launch-tower

    CAD files and software for the launch tower computer (LTC)

    507 parts19
  • 4 layers94 × 140 mmPower, the printed circuit board in 3D

    Power

    LokiMetaSmith/handheld-scanner

    A handheld version of the PlasticScanner

    131 parts5
  • 2 layers115.8 × 85.9 mmPypilot mfd, the printed circuit board in 3D

    Pypilot mfd

    pypilot/pypilot_mfd

    lcd display for various types of marine data including nmea0183, signalk and pypilot

    103 parts4
  • 2 layers306.5 × 96.9 mmOkeeb, the printed circuit board in 3D

    Okeeb

    OklahomaOpenSourceHardware/Oklahoma-Open-Hardware-Mechanical-Keyboard

    Oklahoma themed open source hardware licensed keyboard from the Oklahoma community

    202 parts2GPL-3.0
  • 4 layers80 × 60 mmMR1, the printed circuit board in 3D

    MR1

    EpicQuestBio/MR1

    MR1 specs

    113 parts1CC0-1.0
  • 2 layers188.7 × 147.5 mmTemp sensor panel, the printed circuit board in 3D

    Temp sensor panel

    juniper-garden/twig_temp_humidity_sensor

    Hardware files for the temperature and humidity sensor

    961 partsGPL-3.0
  • 4 layers100 × 100 mmCat a hack, the printed circuit board in 3D

    Cat a hack

    rimio/cat-a-hack

    Prototyping board for PC/μC to transceiver isolation.

    175 partsCC-BY-SA-4.0

Questions

How big is the Pmods PCB?

It measures 58.4 × 20.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pmods use?

38 parts, built around the SN65220DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pmods KiCad files?

From the Dolu1990/pmod_usb_host_x4 repository on GitHub, at the commit this page was made from: the board is pmods.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pmods design in my own project?

Its repository states no licence, so its author keeps all rights: ask Dolu1990 before reusing the design.