Skip to the content
4 layers59.7 × 78 mmCM5IO, the printed circuit board in 3D

Source of the CM5-based drone controller used for onboard image processing, communication, and high-level automation. Originally created for IARC2026 (drone engineering competition), used in other competitions as well.

Size
59.7 × 78 mm
Copper layers
4
Thickness
1.06 mm
Parts
65
Nets
169
Pads
516
Tracks, vias
2,921, 505
Pours
12
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Jan 2026
Updated
24 Jul 2026

Overview

CM5IO is an open-source printed circuit board by Distaff, from the Distaff/RPi_CM_Drone_Board repository on GitHub, published under the MIT licence. It is a 4-layer board of 59.7 × 78 mm with 65 parts on 169 nets, routed with 2,921 tracks and 505 vias.

It is built around the AP22653W6, RT9742GGJ5 and RT9742SNGV, with the 62674-161121ALF among its other parts. Its parts include 12 connectors, 10 resistors, 9 capacitors, 3 ICs and 3 diodes. It belongs with the robots and motor control boards and the Raspberry Pi (Linux) boards of this library.

Main components

4

README

README.md

Raspberry Pi Compute Module Drone Board (CMDB)

Description

Used as a lightweight onboard processing unit for AGH Drone Engineering builds. Provides power supply and necessary I/O for Raspberry Pi CM5 module.

IARC HAT Provides programmable ESP32-S3, with SX-1262 for LoRa connectivity, killswitch that disables FC, and ESC/FC connectors.

Weight of both boards is less than 40g.

PCB Design

Carrier Board

Layout: Board layout

3D render:

FrontBack
3D render front3D render back

IARC HAT

Layout: Board layout

3D render:

FrontBack
3D render front3D render back

Authors

  • Piotr Kądziela (Schematic, PCB Design)
  • Miłosz Ryguła (PCB review)

Parts

65
QtyValueFootprintReferences
4100nCapacitor_SMD:C_0402_1005MetricC9, C12, C13, C18
410uCapacitor_SMD:C_0805_2012MetricC2, C5, C7, C8
42.2K 1%Resistor_SMD:R_0402_1005MetricR6, R7, R8, R9
31kResistor_SMD:R_0402_1005MetricR1, R2, R10
210K 1%Resistor_SMD:R_0402_1005MetricR11, R13
222uFCapacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_HandSolderCP2, CP3
2Conn_01x22_FemaleCM5IO:Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_HorizontalJ5, J16
2LED RedLED_SMD:LED_0603_1608MetricD1, D3
1100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCP4
1100uFCapacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-DC3
110nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCP7
110uFCapacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_HandSolderCP1
1115KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRP1
115.8KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRP3
115K 1%Resistor_SMD:R_0402_1005MetricR12
12.7nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCP5
122.1KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRP2
13.6uHInductor_SMD:L_Bourns-SRN8040_8x8.15mmLP1
133pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCP6
146765-1301CM5IO:CONN_467651301_MOLJ22
162674-161121ALFCM5IO:CON16_1X16_DUT_58XF_GLEJ3
1AP22653W6Package_TO_SOT_SMD:SOT-23-6U6
1AP64501SP-13CM5IO:SOP_AP64501SP-13_DIOUP1
1BT_WIFI_DISABLEJumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mmJP8
1ComputeModule5-CM5CM5IO:Raspberry-Pi-5-Compute-ModuleModule1
1Conn_02x06_Odd_EvenConnector_PinHeader_2.00mm:PinHeader_2x06_P2.00mm_VerticalJ2
1GND_SOLDERPOINTConnector_Wire:SolderWirePad_1x01_SMD_5x10mmH10
1JST_SHBM04B-SRSS-TBConnector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ14
1J_PSU_ENConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1LED GreenLED_SMD:LED_0603_1608MetricD2
1Micro_SD_Card_DetCM5IO:SDCARD_MOLEX_503398-1892J7
1OPENCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCP8
1POWER TERMINALTerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1
1RT9742GGJ5Package_TO_SOT_SMD:SOT-23-5U18
1RT9742SNGVPackage_TO_SOT_SMD:TSOT-23_HandSolderingU12
1Right angle Tact buttonButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1
1THD-20-RConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ8
1TP +3V3TestPoint:TestPoint_Pad_2.0x2.0mmTP5
1TP +5VCCTestPoint:TestPoint_Pad_2.0x2.0mmTP4
1TP GNDTestPoint:TestPoint_Pad_2.0x2.0mmTP1
1TP PSU_ENTestPoint:TestPoint_Pad_2.0x2.0mmTP3
1TP SD_PWRTestPoint:TestPoint_Pad_2.0x2.0mmTP8
1TP VBUS_HDMITestPoint:TestPoint_Pad_2.0x2.0mmTP10
1TP VBUS_USBTestPoint:TestPoint_Pad_2.0x2.0mmTP9
1TP VINTestPoint:TestPoint_Pad_2.0x2.0mmTP2
1TP nACTTestPoint:TestPoint_Pad_2.0x2.0mmTP7
1TP nPWRTestPoint:TestPoint_Pad_2.0x2.0mmTP6
1USB3_AConnector_USB:USB3_A_Molex_48393-001J12
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ11
1VIN_SOLDERPOINTConnector_Wire:SolderWirePad_1x01_SMD_5x10mmH9

More from Distaff/RPi_CM_Drone_Board

2
  • 2 layers50.3 × 56.3 mmCM5IO top, the printed circuit board in 3D

    CM5IO top

    Distaff/RPi_CM_Drone_Board

    Source of the CM5-based drone controller used for onboard image processing, communication, and high-level automation. Originally created for IARC2026 (drone engineering competition), used in other competitions as well.

    57 parts1MIT
  • 6 layers59.7 × 78 mmCMDB Adv, the printed circuit board in 3D

    CMDB Adv

    Distaff/RPi_CM_Drone_Board

    Source of the CM5-based drone controller used for onboard image processing, communication, and high-level automation. Originally created for IARC2026 (drone engineering competition), used in other competitions as well.

    9 parts1MIT

Similar boards

  • 6 layers125 × 125 mmLibreboard broken, the printed circuit board in 3D

    Libreboard broken

    256foundation/libreboard

    Open Source Bitcoin Mining Control Board

    193 parts21CERN-OHL-S-2.0
  • 4 layers80 × 70 mmCM4IOv5, the printed circuit board in 3D

    CM4IOv5

    vega-d/CM4-nano-carrierboard

    A simplified carrier board for RPI CM4 module featuring reduced footprint.

    66 parts11GPL-3.0
  • 4 layers100 × 100 mmNetherrack, the printed circuit board in 3D

    Netherrack

    nimitvijayvargee/netherrack

    A Compute Module 5 Carrier board to use as a minecraft server!

    65 parts1MIT
  • 4 layers99.5 × 90.2 mmHomeBoy, the printed circuit board in 3D

    HomeBoy

    devisunofficial/HomeBoy

    Homeboy is Raspberry-Pi based Game Console(Emulator) which can also act as server( or Backend) for my other projects.

    62 parts
  • 4 layers160 × 90 mmCM5IO, the printed circuit board in 3D

    CM5IO

    HWXLR8/pcbeef

    A collection of simple PCB designs

    22 partsGPL-3.0
  • 4 layers160 × 90 mmCmb cat, the printed circuit board in 3D

    Cmb cat

    rassom-anatol/cmb-cat

    Cortex Motion Base for EtherCAT

    151 parts
  • 4 layers160 × 90 mmCM4IOUSB3, the printed circuit board in 3D

    CM4IOUSB3

    leesanghun-droid/A-project

    154 parts
  • 4 layers100 × 100 mmCM4IOv5, the printed circuit board in 3D

    CM4IOv5

    NBence0/JedlikBots

    Welcome to the official GitHub page of JedlikBots! 🎓🤖 We are the dedicated team of software development and robotics students from the Jedlik Ányos Technical School in Győr, Hungary.

    226 parts

Questions

How big is the CM5IO PCB?

It measures 59.7 × 78 mm and has 4 copper layers, 1.06 mm thick.

What parts does the CM5IO use?

65 parts, built around the AP22653W6, RT9742GGJ5, RT9742SNGV and 62674-161121ALF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CM5IO KiCad files?

From the Distaff/RPi_CM_Drone_Board repository on GitHub, at the commit this page was made from: the board is pcb_CMDB_rev1/CM5IO.kicad_pcb and its schematic pcb_CMDB_Adv/CM5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CM5IO design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).