6 layers100 × 55 mm
6 layers122 × 77 mm
CRMHJN capable carrier
CapableRobot/capable_jetson_carrier- Size
- 122 × 77 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 559
- Nets
- 476
- Pads
- 1,764
- Tracks, vias
- 5,533, 935
- Pours
- 76
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Apr 2022
- Updated
- 27 Oct 2022
Overview
CRMHJN capable carrier is an open-source printed circuit board by CapableRobot, from the CapableRobot/capable_jetson_carrier repository on GitHub, published under the Apache-2.0 licence. It is a 6-layer board of 122 × 77 mm with 559 parts on 476 nets, routed with 5,533 tracks and 935 vias.
It is built around the SIC437BED, TPD4E05U06DQAR and TXU0304BQAR, with the 74HC00PW, AT24CS01-STUM-T and CRCW040210K0FKEDHP among its other parts. Its parts include 160 resistors, 90 capacitors, 15 ICs, 11 transistors and 11 connectors.
Main components
12
SIC437BED
PowerPAK-MLP44-24L-40℃~+125℃@(TJ) 1 12A 300kHz~1MHz 3V~28V 50uA 600mV~20V Adjustable Buck Buck Built-in Yes PowerPAK-MLP44-24L DC-DC Converters ROHSVishay IntertechnologyDC-DC Converters
TPD4E05U06DQAR
USON-10-40℃~+125℃ 0.5pF 10nA 14V 2.5A@8/20us 40W@8/20us 5.5V 6.5V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD Protection Devices
TXU0304BQAR
WQFN-14(2.5x3)-40℃~+125℃ 1.1V~5.5V 1.1V~5.5V 200Mbps 4 Bidirectional Level translator Power-off protection、Output enable high-impedance、Integrated pull-up resistor SPI、JTAG、UART Tri-State WQFN-14(2.5x3) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
74HC00PW
TSSOP-14-40℃~+125℃ 2V~6V 4 40uA 5.2mA 5.2mA 74HC Series 7ns@6V,50pF NAND Gate Overvoltage-tolerant input TSSOP-14 Logic Gates ROHSNexperiaLogic Gates
AT24CS01-STUM-T
SOT-23-5-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1Kbit 1MHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOT-23-5 EEPROM ROHSMicrochip TechnologyEEPROM
CRCW040210K0FKEDHP
0402-55℃~+155℃ 10kΩ 200mW 50V Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
0402X104K6R3CT
0402100nF 6.3V X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSWalsin TechnologyMultilayer Ceramic Capacitors MLCC - SMD/SMTERJ2GE0R00X
0402-100ppm/℃~+600ppm/℃ -55℃~+155℃ 0Ω 100mW Thick Film Resistor 0402 Chip Resistor - Surface Mount ROHSPanasonicChip Resistor - Surface MountCRCW04022K00FKEDC
0402-55℃~+155℃ 2kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
BSS138PW
SOT-323-55℃~+150℃ 1 N-channel 1.5Ω@10V 1V 2.2pF 236mW 25pF 360mA 60V 650pC@4.5V 9.7pF N-Channel SOT-323 MOSFETs ROHSElecSuperMOSFETsCRCW0402100KFKEDHP
0402-55℃~+155℃ 100kΩ 200mW 50V Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountCRCW0402470RFKEDC
0402-55℃~+155℃ 470Ω 63mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
Parts
559| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | R_10k_0402 | Resistor_SMD:R_0402_1005Metric | R105, R106, R107, R108, R109, R110, R111, R112, R113, R118, R129, R130, R131, R132, R137, R138 +14 |
| 23 | C_100n_0402 | Capacitor_SMD:C_0402_1005Metric | C4, C18, C19, C23, C26, C28, C33, C44, C45, C46, C50, C53, C57, C58, C66, C67 +7 |
| 23 | R_1k_0402 | Resistor_SMD:R_0402_1005Metric | R104, R121, R122, R125, R126, R127, R139, R140, R142, R143, R153, R154, R155, R158, R159, R160 +7 |
| 21 | ~ | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP10, TP13, TP14, TP16, TP17, TP18, TP19, TP21, TP23, TP24, TP27, TP28, TP29 +5 |
| 18 | C_100n_0402 | jetson-nano-baseboard-footprints:0402-cap | C1, C2, C14, C15, C36, C37, C38, C48, C49, C51, C52, C68, C69, C70, C71, C86 +2 |
| 18 | R_0R_0402 | Resistor_SMD:R_0402_1005Metric | R1, R32, R40, R41, R80, R100, R101, R119, R123, R134, R135, R141, R144, R145, R150, R151 +2 |
| 14 | R_2k_0402 | jetson-nano-baseboard-footprints:0402-res | R10, R11, R18, R22, R24, R25, R27, R28, R29, R33, R34, R35, R102, R103 |
| 13 | R_10k_0402 | jetson-nano-baseboard-footprints:0402-res | R2, R3, R5, R26, R31, R46, R54, R95, R114, R115, R116, R124, R133 |
| 11 | BSS138APW | jetson-nano-baseboard-footprints:SC70-3 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, T2, T3, T4 |
| 10 | DNP | Resistor_SMD:R_0402_1005Metric | R15, R19, R20, R38, R44, R53, R55, R72, R73, R87 |
| 9 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP22, TP25, TP30, TP32, TP33, TP34, TP35, TP36, TP37 |
| 9 | Testpad | TestPoint:TestPoint_Pad_D1.0mm | TP4, TP7, TP8, TP11, TP12, TP15, TP20, TP40, TP41 |
| 8 | R_0R_0402 | jetson-nano-baseboard-footprints:0402-res | R21, R57, R60, R66, R67, R68, R69, R92 |
| 7 | C_10u_0603 | Capacitor_SMD:C_0603_1608Metric | C30, C31, C34, C35, C39, C40, C47 |
| 7 | DNP | jetson-nano-baseboard-footprints:0402-res | R4, R6, R7, R8, R9, R23, R30 |
| 6 | C_4u7_0603 | Capacitor_SMD:C_0603_1608Metric | C3, C5, C43, C76, C77, C85 |
| 6 | R_100k_0402 | Resistor_SMD:R_0402_1005Metric | R17, R48, R56, R78, R90, R91 |
| 5 | C_1u_0603 | Capacitor_SMD:C_0603_1608Metric | C16, C55, C62, C75, C89 |
| 5 | LED | LED_SMD:LED_0603_1608Metric | BOOT1, D6, D7, NVME1, PWR1 |
| 5 | R_2k_0402 | Resistor_SMD:R_0402_1005Metric | R64, R65, R75, R76, R77 |
| 5 | R_470R_0402 | jetson-nano-baseboard-footprints:0402-res | R14, R97, R98, R99, R128 |
| 4 | C_10u_0603 | jetson-nano-baseboard-footprints:0603-cap | C25, C54, C63, C81 |
| 4 | C_10u_1206_50V | jetson-nano-baseboard-footprints:1206-cap | C8, C12, C17, C22 |
| 4 | C_47u_0805 | jetson-nano-baseboard-footprints:0805-cap | C20, C21, C59, C64 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4 |
| 3 | AP22652W6-7 | jetson-nano-baseboard-footprints:SOT-23-6 | IC1, IC2, IC3 |
| 3 | Polyfuse_Small | Fuse:Fuse_0603_1608Metric | F1, F2, F3 |
| 3 | R_12k4_0402 | Resistor_SMD:R_0402_1005Metric | R39, R50, R51 |
| 3 | R_200k_0402 | jetson-nano-baseboard-footprints:0402-res | R84, R86, R136 |
| 3 | R_DNP_0402 | Resistor_SMD:R_0402_1005Metric | R79, R149, R152 |
| 2 | 74279221100 | jetson-nano-baseboard-footprints:1206-res | FB1, FB3 |
| 2 | 9774015151R | jetson-nano-baseboard-footprints:M2.5-2.5mm | SP1, SP3 |
| 2 | 9774040151 | jetson-nano-baseboard-footprints:M2.5-4mm | SP2, SP7 |
| 2 | 9774060151 | jetson-nano-baseboard-footprints:M2.5-6mm | SP5, SP6 |
| 2 | BLM18SG121TN1D | Inductor_SMD:L_0603_1608Metric | L2, L3 |
| 2 | BLM21PG121SN1D | Inductor_SMD:L_0805_2012Metric | L6, L7 |
| 2 | C_100n_0402_50V | Capacitor_SMD:C_0402_1005Metric | C13, C56 |
| 2 | C_10n_0402 | Capacitor_SMD:C_0402_1005Metric | C61, C72 |
| 2 | C_16p_0402 | Capacitor_SMD:C_0402_1005Metric | C27, C29 |
| 2 | C_1u_0402 | Capacitor_SMD:C_0402_1005Metric | C42, C84 |
| 2 | C_330u_KEMET_B | jetson-nano-baseboard-footprints:KEMET_B | C10, C11 |
| 2 | Conn_01x06_Female | Connector_Molex:Molex_Pico-Lock_504050-0691_1x06-1MP_P1.50mm_Horizontal | J11, J14 |
| 2 | Conn_01x32_Female | Connector_FFC-FPC:Hirose_FH12-32S-0.5SH_1x32-1MP_P0.50mm_Horizontal | J6, J7 |
| 2 | DNP | Resistor_SMD:R_0805_2012Metric | R61, R94 |
| 2 | DNP | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric | C24, C82 |
| 2 | D_TVS | Diode_SMD:D_0402_1005Metric | D1, D5 |
| 2 | IHLP3232DZER3R3M01 | jetson-nano-baseboard-footprints:IHLP3232DZ | L1, L4 |
| 2 | PESD2USB5UV-TR | jetson-nano-baseboard-footprints:SOT-23s | D3, D4 |
| 2 | R_0R_0603 | Resistor_SMD:R_0603_1608Metric | R12, R148 |
| 2 | R_100k_0402 | jetson-nano-baseboard-footprints:0402-res | R59, R96 |
| 2 | R_1k_0402 | jetson-nano-baseboard-footprints:0402-res | R16, R36 |
| 2 | R_3R3_0402 | Resistor_SMD:R_0402_1005Metric | R58, R89 |
| 2 | R_510k_0402 | Resistor_SMD:R_0402_1005Metric | R45, R74 |
| 2 | SIC437 | capablerobot-footprints:SIC437AED-T1-GE3 | U1, U2 |
| 2 | TPD4E05U06DQAR | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U9, U10 |
| 2 | TXU0304BQA | capablerobot-footprints:TXU0304BQAR | U8, U14 |
| 1 | Oscillator:Oscillator_SMD_Kyocera_KC2520Z-4Pin_2.5x2.0mm | U12 | |
| 1 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U11 | |
| 1 | Package_TO_SOT_SMD:SOT-23-5 | U13 | |
| 1 | 1N4148WS | jetson-nano-baseboard-footprints:SOD-323 | D13 |
| 1 | 3v3 LDO | jetson-nano-baseboard-footprints:SOT-23-5 | IC5 |
| 1 | 40 MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 50mA | Fuse:Fuse_0603_1608Metric | PTC9 |
| 1 | 533980471 | jetson-nano-baseboard-footprints:Molex_PicoBlade_53398-0471_1x04-1MP_P1.25mm_Vertical | J12 |
| 1 | 600R | Inductor_SMD:L_0603_1608Metric | FB4 |
| 1 | 742792022 | jetson-nano-baseboard-footprints:0805-res | FB2 |
| 1 | 74HC00PW | jetson-nano-baseboard-footprints:TSSOP-14 | IC12 |
| 1 | AT24CS01-ST | jetson-nano-baseboard-footprints:SOT23-5 | IC17 |
| 1 | Bus_M.2_Socket_E | jetson-nano-baseboard-footprints:TE_2199119-4 | J4 |
| 1 | C_100u_1206 | Capacitor_SMD:C_1206_3216Metric | C32 |
| 1 | C_10u_0805 | Capacitor_SMD:C_0805_2012Metric | C80 |
| 1 | C_1u_0402 | jetson-nano-baseboard-footprints:0402-cap | C65 |
| 1 | C_2u2_0402 | jetson-nano-baseboard-footprints:0402-cap | C60 |
| 1 | C_47n_0402 | jetson-nano-baseboard-footprints:0402-cap | C41 |
| 1 | Conn_01x04_Female | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J15 |
| 1 | Conn_01x04_Female | Connector_Molex:Molex_Pico-Lock_504050-0491_1x04-1MP_P1.50mm_Horizontal | J16 |
| 1 | Conn_01x04_Female | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J9 |
| 1 | Conn_01x05_Female | Connector_Molex:Molex_Pico-Lock_504050-0591_1x05-1MP_P1.50mm_Horizontal | J2 |
| 1 | Conn_01x06_Female | Connector_FFC-FPC:Hirose_FH12-6S-0.5SH_1x06-1MP_P0.50mm_Horizontal | J5 |
The 361 most common of 559 parts.
More from CapableRobot/capable_jetson_carrier
2- 2 layers18 × 13 mm
Similar boards
- 8 layers66 × 8.7 mm
Jetson Carrier PX4-Fusion-
PranavNedunghat/Jetson-Carrier-PX4-Fusion-
This project contains open hardware design files for a baseboard supporting the NVIDIA Jetson Nano, Xavier NX and TX2 NX SoMs.
520 partsApache-2.0 - 4 layers80.1 × 22.2 mm
M2-smart iot module
antmicro/m2-smart-iot-module
https://antmicro.com/blog/2021/08/open-hardware-smart-m2-radio-module-for-iot/
212 parts30Apache-2.0 - 8 layers78 × 55 mm
Jetson AI Cam CopperPilot
CopperPilot/Jetson-AI-Cam-CopperPilot
A carrier for Jetson Nano, Xavier NX and TX2 NX with two IMX219 cameras on a 39 mm stereo baseline, dual 4K outputs and CAN.
305 parts15 - 8 layers100.2 × 55 mm
Jetson nano baseboard
antmicro/jetson-nano-baseboard
Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
391 parts548Apache-2.0 - 8 layers118 × 100 mm
Kria k26-devboard
antmicro/kria-k26-devboard
Open source AMD Xilinx Kria UltraScale+ SoM baseboard
660 parts83Apache-2.0 - 8 layers110 × 90 mm
- 4 layers53.1 × 98 mm
- 4 layers85 × 40 mm
Wled controller
electro-practically/wled-controller
WLED ESP32 controller powered by USB-C Power Delivery.
99 partsCERN-OHL-P-2.0
Questions
How big is the CRMHJN capable carrier PCB?
It measures 122 × 77 mm and has 6 copper layers, 1.6 mm thick.
What parts does the CRMHJN capable carrier use?
559 parts, built around the SIC437BED, TPD4E05U06DQAR, TXU0304BQAR and 74HC00PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CRMHJN capable carrier KiCad files?
From the CapableRobot/capable_jetson_carrier repository on GitHub, at the commit this page was made from: the board is CRMHJN_capable_carrier.kicad_pcb and its schematic capable_jetson_carrier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CRMHJN capable carrier design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).