
Telemetry
CanGulmez/EV-Control-System
Linux based EV Control System developed for BeagleBone Black Rev C

Linux based EV Control System developed for BeagleBone Black Rev C
EV Control System is an open-source printed circuit board by CanGulmez, from the CanGulmez/EV-Control-System repository on GitHub, published under the MIT licence. It is a 2-layer board of 91.6 × 60 mm with 15 parts on 93 nets, routed with 134 tracks and 11 vias.
It is built around the TJA1051T/3/1. Its parts include 6 connectors, 4 capacitors, 4 resistors and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 3 | 4k7 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4 |
| 2 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5, J6 |
| 2 | Conn_02x23_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x23_P2.54mm_Vertical | J1, J2 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J3 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J4 |
| 1 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |

CanGulmez/EV-Control-System
Linux based EV Control System developed for BeagleBone Black Rev C


michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)



bitbane/CANT
The CANT project is designed to allow people to screw around with CAN easily at layers 1/2. All of the stuff that is normally handled by a CAN controller that is baked into sillicon is up for grabs.



It measures 91.6 × 60 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the TJA1051T/3/1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CanGulmez/EV-Control-System repository on GitHub, at the commit this page was made from: the board is KiCAD/EV Control System/EV Control System.kicad_pcb and its schematic KiCAD/EV Control System/EV Control System.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).