
1001016-001-10-01 PinJammer V01
pinqin/PinJammerV01
This file documents the hardware of PCB 1001016-001-10-01PinJammerV01, including a consolidated bill of materials.

ExitIQ: ESP32-S3 Edge-AI Emergency Evacuation Guidance Terminal (Vishwakarma Awards 2026 Stage 2)
ExitIQ is an open-source printed circuit board by Binita126, from the Binita126/ExitIQ repository on GitHub. It is a 2-layer board of 100 × 80 mm with 74 parts on 69 nets, routed with 588 tracks and 54 vias.
It is built around the 74AHCT1G125SE, SHT40-AD1B-R2 and BQ24074RGTR, with the WS2812B, 1N4148W and CMT-8540S-SMT-TR among its other parts. Its parts include 9 diodes, 5 ICs, 2 connectors, 1 transistor and 1 switch.
ExitIQ is an ESP32-S3-powered, decentralized Edge AI emergency evacuation guidance terminal designed to replace obsolete static signage with real-time, dynamic egress routing during smoke and fire emergencies.
Conventional fire evacuation systems rely on static exit signs and centralized alarms. In modern multi-story and industrial facilities, static signage presents critical failure modes:
The ExitIQ Solution:
ExitIQ operates as an autonomous, localized terminal. By monitoring real-time environmental vectors (ambient temperature and combustion off-gassing) on-device, each terminal independently evaluates hazard threat levels and actuates directional strobe arrays and an acoustic alarm to steer occupants along the safest verified egress route.
flowchart TD
subgraph Power ["Power Subsystem"]
USB["USB-C 5V Input"] --> BQ["TI BQ24074 Power-Path & Charger"]
BAT["3.7V Li-Ion Battery"] <--> PROT["DW01A + FS8205A Protection"]
PROT <--> BQ
BQ -->|VSYS| BOOST["TI TPS61023 5V Boost"]
BQ -->|VSYS| LDO["3.3V LDO on DevKit"]
end
subgraph Controller ["Core Processing"]
LDO --> ESP["ESP32-S3-DevKitC-1 (Xtensa LX7)"]
ESP -->|ADC Divider| VBAT_MON["Battery Monitor"]
end
subgraph Sensors ["Isolated Environmental Bay"]
ESP -->|I2C 3.3V| SHT["Sensirion SHT40 (Temp/RH)"]
ESP -->|I2C 3.3V| SGP["Sensirion SGP40 (VOC AQI)"]
end
subgraph Indicators ["Dynamic Actuation"]
ESP -->|GPIO| SHIFT["SN74AHCT1G125 Level Shifter"]
BOOST -->|5.0V| WS["8x WS2812B Directional LEDs"]
SHIFT -->|Data| WS
ESP -->|GPIO PWM| BUZZ["2N7002 + 85dBA Buzzer"]
ESP -->|I2C 3.3V| OLED["SSD1306 128x64 OLED"]
endExitIQ_GitHub_Release/
├── README.md # Master project guide and verification summary
├── LICENSE # MIT License
├── .gitignore # KiCad, CAD, and OS exclusion rules
├── DESIGN_NOTES.md # Complete engineering architecture & power budget
├── hardware/
│ ├── schematics/
│ │ ├── ExitIQ.kicad_sch # Authoritative KiCad schematic
│ │ ├── ExitIQ.kicad_pro # KiCad project configuration
│ │ ├── ExitIQ.pdf # Full schematic release print
│ │ ├── ExitIQ.net # Netlist cross-probing file
│ │ └── fp-lib-table / sym-lib-table # Relative library tables
│ ├── pcb/
│ │ ├── ExitIQ.kicad_pcb # Authoritative 100% routed 2-layer PCB
│ │ ├── ExitIQ.kicad_pro # PCB project settings
│ │ └── fp-lib-table # PCB footprint table
│ └── libraries/
│ ├── symbols/ExitIQ.kicad_sym # Custom schematic symbols
│ └── footprints.pretty/ # Custom footprints (e.g., SGP40 DFN-6)
├── mechanical/
│ ├── catia/
│ │ ├── ExitIQ_Enclosure_Assembly_ReleaseCandidate.CATProduct # Authoritative RC assembly
│ │ ├── ExitIQ_Enclosure_Base.CATPart # Base tub with 4 concentric standoffs
│ │ ├── ExitIQ_Enclosure_Lid_RC.CATPart # Centered 55x8mm LED slot lidmechanical/enclosure/ExitIQ_Enclosure_Assembly_ReleaseCandidate.CATProduct.mechanical/exports/ExitIQ_Enclosure_Assembly_ReleaseCandidate.step.mechanical/exports/ExitIQ.step.hardware/schematics/ExitIQ.kicad_pro or hardware/schematics/ExitIQ.kicad_sch.hardware/schematics/sym-lib-table.hardware/pcb/ExitIQ.kicad_pro or hardware/pcb/ExitIQ.kicad_pcb.hardware/pcb/fp-lib-table.fabrication/ExitIQ_Gerber_Drill_Package.zip.fabrication/assembly/ExitIQ_Assembly_BOM.csv (41 unique items, 70 components total).| Subsystem / Metric | Status | Evidence / Log File |
|---|---|---|
| Schematic ERC | PASSED (0 Errors, 0 Warnings) | reports/erc/ExitIQ_ERC_FinalReview.rpt |
| PCB Layout DRC | PASSED (100% Routed, 0 Shorts) | reports/drc/ExitIQ_DRC_FinalReview.rpt |
| Unconnected Nets | 0 (All 70 nets, 642 tracks connected) | reports/drc/ExitIQ_DRC_FinalReview.rpt |
| Ground Plane | Continuous low-impedance B.Cu pour | fabrication/gerbers/ExitIQ-B_Cu.gbl |
| Mechanical Clearance | 0 collisions, +2.40 mm top headroom | reports/ExitIQ_CATIA_Final_Verification.md |
| LED Optical Window | Centered $55 \times 8\text{ mm}$ slot over 8 LEDs | images/mechanical/ExitIQ_LED_RC_Alignment_Check.png |
| Stage 2 Presentation | 20 Slides complete with Vishwakarma Logo | presentation/ExitIQ_Stage2_Final_With_Vishwakarma_Logo.pptx |
In the spirit of complete engineering honesty:
This project is licensed under the MIT License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | C_0603_1608Metric | C_BATT_FILT, C_BTN, C_LED1, C_LED2, C_LED3, C_LED4, C_LED5, C_LED6, C_LED7, C_LED8, C_SGP, C_SHT |
| 8 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 5 | 10uF 16V | C_0805_2012Metric | C_BAT, C_BST_IN, C_OLED, C_SYS, C1 |
| 4 | MountingHole_3.2mm_M3 | MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100k 1% | R_0603_1608Metric | R_BAT1, R_BAT2, R_FB2 |
| 3 | 10k | R_0603_1608Metric | R_BTN, R_EN2, R_PG |
| 2 | 22uF 10V | C_0805_2012Metric | C_BO1, C_BO2 |
| 2 | 4.7k 1% | R_0603_1608Metric | R_SCL, R_SDA |
| 2 | 5.1k | R_0603_1608Metric | R_CC1, R_CC2 |
| 1 | 1.0k | R_0603_1608Metric | R_LED_PWR |
| 1 | 1.0k 1% | R_0603_1608Metric | R_ISET |
| 1 | 1.0uH 4.5A | L_Coilcraft_XxL4020 | L1 |
| 1 | 1.18k 1% | R_0603_1608Metric | R_ILIM |
| 1 | 1.5k | R_0603_1608Metric | R_CHG |
| 1 | 100 | R_0603_1608Metric | R_BZ_G |
| 1 | 100k | R_0603_1608Metric | R_BZ_PD |
| 1 | 100uF 10V | CP_Radial_D6.3mm_P2.50mm | C_LED_BULK |
| 1 | 10k 1% | R_0603_1608Metric | R_TS |
| 1 | 1N4148W | D_SOD-123 | D_FLY |
| 1 | 2.0A Hold | Fuse_1812_4532Metric | F1 |
| 1 | 22pF | C_0603_1608Metric | C_FF |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | 330 | R_0603_1608Metric | R_DAMP |
| 1 | 47k | R_0603_1608Metric | R_TMR |
| 1 | 732k 1% | R_0603_1608Metric | R_FB1 |
| 1 | 74AHCT1G125 | SOT-23-5 | U4 |
| 1 | BATT_JST_PH | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | BQ24074RGTR | QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U2 |
| 1 | CMT-8540S-SMT | MagneticBuzzer_CUI_CMT-8504-100-SMT | BZ1 |
| 1 | DevKitC-1_J1 | PinSocket_1x22_P2.54mm_Vertical | J_MCU_LEFT |
| 1 | DevKitC-1_J3 | PinSocket_1x22_P2.54mm_Vertical | J_MCU_RIGHT |
| 1 | EXT_LED_STRIP_3P | PinHeader_1x03_P2.54mm_Vertical | J_LED_EXT |
| 1 | GREEN (MAINS) | LED_0805_2012Metric | D_PWR |
| 1 | OLED_SSD1306_4P | PinSocket_1x04_P2.54mm_Vertical | J_OLED |
| 1 | ORANGE (CHG) | LED_0805_2012Metric | D_CHG |
| 1 | SENSOR_EXP_5P | PinHeader_1x05_P2.54mm_Vertical | J_EXP |
| 1 | SGP40-DIS | Sensirion_DFN-6-1EP_2.44x2.44mm_P0.8mm | U6 |
| 1 | SHT40-AD1B | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U5 |
| 1 | SMAJ5.0A | D_SMA | D1 |
| 1 | TEST_BTN | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW1 |
| 1 | TPS61023DRLR | SOT-563 | U3 |
| 1 | USB_C_5V_IN | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

pinqin/PinJammerV01
This file documents the hardware of PCB 1001016-001-10-01PinJammerV01, including a consolidated bill of materials.



neon-beat/neon-beat-buzzer-pcb
Electronic design for the Neon Beat buzzer


damnitzhemanth-oss/Flight_Controller
Custom STM based flightcontroller designed from scratch.

Mykola2/uart-cable-tester
design.py is the single source of truth: parts, footprints, pin-to-net map and positions. Everything else is generated from it.

It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
74 parts, built around the 74AHCT1G125SE, SHT40-AD1B-R2, BQ24074RGTR and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Binita126/ExitIQ repository on GitHub, at the commit this page was made from: the board is hardware/pcb/ExitIQ.kicad_pcb and its schematic hardware/schematics/ExitIQ.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Binita126 before reusing the design.