
ExitIQ
Binita126/ExitIQ
ExitIQ: ESP32-S3 Edge-AI Emergency Evacuation Guidance Terminal (Vishwakarma Awards 2026 Stage 2)

Placa principal v2 is an open-source printed circuit board by ManuelOrtizCamacho, from the ManuelOrtizCamacho/PCB_AMR repository on GitHub. It is a 2-layer board of 142.9 × 100.2 mm with 122 parts on 173 nets, routed with 1,363 tracks and 181 vias.
It is built around the CH340G, LM2596S-5.0 and USBLC6-2SC6, with the ICM-20948, LM1117MP-3.3 and BAT54C among its other parts. Its parts include 39 resistors, 22 capacitors, 20 connectors, 8 ICs and 6 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10kohm | Resistor_SMD:R_0805_2012Metric | R3, R6, R7, R8, R12, R13, R15, R16, R19, R20, R23, R24, R26, R30, R34, R36 |
| 15 | 5.1k | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R14, R17, R18, R21, R22, R25, R27, R28, R31, R32, R33, R35 |
| 14 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5, C6, C7, C8, C9, C10, C13, C14, C15, C16, C18, C19 |
| 12 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 4 | 4.7kohm | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3, H4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C17, C20 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 220uF | Capacitor_SMD:CP_Elec_10x10 | C21, C22 |
| 2 | 270ohm | Resistor_SMD:R_0805_2012Metric | R38, R39 |
| 2 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D1, D3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D5, D6 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6, U7 |
| 2 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J18, J19 |
| 1 | 100ohm | Resistor_SMD:R_0805_2012Metric | R37 |
| 1 | 1N4148 | Diode_SMD:D_SOD-323F | D4 |
| 1 | 1N5822 | Diode_SMD:D_SMB | D2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 33uH | Inductor_SMD:L_Bourns_SRR1260 | L2 |
| 1 | 600 Ω a 100 MHz | Inductor_SMD:L_0603_1608Metric | FB2 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | CMT-8540S-SMT | CMT-8540S-SMT:CUI_CMT-8540S-SMT | LS1 |
| 1 | Conn_01x05_Socket | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J15 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J13 |
| 1 | Conn_02x10_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J20 |
| 1 | Driver_1 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal | J3 |
| 1 | Driver_2 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal | J2 |
| 1 | Driver_3 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal | J4 |
| 1 | Driver_4 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal | J5 |
| 1 | Encoder_1 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J1 |
| 1 | Encoder_2 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J8 |
| 1 | Encoder_3 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J7 |
| 1 | Encoder_4 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J9 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U2 |
| 1 | IRLML6402 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Input 12V-24V connector | Connector_AMASS:AMASS_XT60IPW-M_1x03_P7.20mm_Horizontal | J6 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U4 |
| 1 | LOGO | Logos:logo_md_eia | G*** |
| 1 | LOGO | Logos:logo_g2_eia | G*** |
| 1 | LOGO | Logos:Codigo_personal | G*** |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | STM32F407VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U3 |
| 1 | S_linea1 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0300_1x03_P3.00mm_Horizontal | J16 |
| 1 | S_linea2 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0300_1x03_P3.00mm_Horizontal | J17 |
| 1 | Sproximidad_1 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J14 |
| 1 | Sproximidad_2 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J10 |
| 1 | Sproximidad_3 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J11 |
| 1 | Sproximidad_4 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J12 |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U5 |
| 1 | TestPoint | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP13 |

Binita126/ExitIQ
ExitIQ: ESP32-S3 Edge-AI Emergency Evacuation Guidance Terminal (Vishwakarma Awards 2026 Stage 2)


pinqin/PinJammerV01
This file documents the hardware of PCB 1001016-001-10-01PinJammerV01, including a consolidated bill of materials.

jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.


leptun/Avionus_Flight_Controller
Controller board for autonomous RC plane


Solartraveler/led-toybox
Some RGB LEDs, some sound in a case give a good toy for kids
It measures 142.9 × 100.2 mm and has 2 copper layers, 1.6 mm thick.
122 parts, built around the CH340G, LM2596S-5.0, USBLC6-2SC6 and ICM-20948. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ManuelOrtizCamacho/PCB_AMR repository on GitHub, at the commit this page was made from: the board is Placa_principal_v2.kicad_pcb and its schematic BTS7960.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ManuelOrtizCamacho before reusing the design.