

SensorNode
- Size
- 35.5 × 35 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 115
- Nets
- 91
- Pads
- 351
- Tracks, vias
- 829, 109
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Aug 2022
- Updated
- 1 Nov 2025
Overview
SensorNode is an open-source printed circuit board by Bergi84, from the Bergi84/GrowOMatic repository on GitHub. It is a 4-layer board of 35.5 × 35 mm with 115 parts on 91 nets, routed with 829 tracks and 109 vias.
It is built around the RP2040, AP63357QZV and MCP6001R-I/OT, with the W25Q16JVUXIQ, LMP2231AMF and BAT54W among its other parts. Its parts include 45 resistors, 40 capacitors, 11 connectors, 9 ICs and 3 inductors. It belongs with the home automation and IoT boards and the RP2040 boards of this library.
Main components
6RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)AP63357QZV
VDFN-13(2x3)-40℃~+125℃@(TA) 1 22uA 3.5A 3.8V~32V 450kHz 800mV~32V Adjustable Buck Buck Built-in Yes VDFN-13(2x3) DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersMCP6001R-I/OT
SOT-23-5-40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierW25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASHLMP2231AMF
SOT-23-5-40℃~+125℃ 0.02pA 0.058V/us 1 130kHz 30mA ESD protection SOT-23-5 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsBAT54W
SOD-123Schottky Diodeshongjiacheng
Parts
115| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C7, C10, C13, C16, C18, C19, C25, C29, C32, C33, C36, C37, C39, C40, C41 +2 |
| 6 | 10k | Inductor_SMD:L_0603_1608Metric | R19, R20, R32, R33, R37, R38 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R6, R10, R11, R12, R13 |
| 6 | 1n | Capacitor_SMD:C_0603_1608Metric | C26, C27, C30, C31, C34, C35 |
| 4 | 100k | Inductor_SMD:L_0603_1608Metric | R24, R26, R28, R35 |
| 4 | 1M | Inductor_SMD:L_0603_1608Metric | R21, R22, R23, R25 |
| 4 | 22µ | Capacitor_SMD:C_1206_3216Metric | C20, C22, C23, C24 |
| 4 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6, J7, J8, J11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R9, R41, R42 |
| 3 | 1µF | Capacitor_SMD:C_0603_1608Metric | C14, C21, C28 |
| 3 | 20k | Inductor_SMD:L_0603_1608Metric | R31, R34, R36 |
| 2 | 10µ | Capacitor_SMD:C_1210_3225Metric | C5, C6 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 1R | Inductor_SMD:L_0603_1608Metric | R17, R18 |
| 2 | 1k | Inductor_SMD:L_0603_1608Metric | R39, R40 |
| 2 | 20R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 4.7u | Inductor_SMD:L_1008_2520Metric | L3, L4 |
| 2 | 50R | Resistor_SMD:R_0603_1608Metric | R44, R45 |
| 2 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J4, J5 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric | C15, C17 |
| 1 | 0R | Inductor_SMD:L_0603_1608Metric | R43 |
| 1 | 100 | Inductor_SMD:L_0603_1608Metric | R30 |
| 1 | 100R | Inductor_SMD:L_0603_1608Metric | R27 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric | C38 |
| 1 | 10M | Inductor_SMD:L_0603_1608Metric | R29 |
| 1 | 10µ | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 12Mhz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 3.3n | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 5.6k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 91k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | AP63357Q | Bergi:V-DFN3020-13 | U3 |
| 1 | BAT54W | Diode_SMD:D_SOD-323 | D1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | Conn_Coaxial | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J9 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LMP2231AMF | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | MCP3465R | Bergi:QFN-12_EP_2x2_Pitch0.4mm | U8 |
| 1 | MCP6001R | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | NCS333ASN2T1G | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | TLV9002S | Bergi:Texas_S-X2QFN-10 | U5 |
| 1 | TMP451 | Bergi:TI_WSON8_2x2mm_noEP | U9 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J1 |
| 1 | W25Q16JVUXIQ | Bergi:DFN-8-1EP_3x2mm_P0.5mm_EP0.3x1.6mm | U1 |
More from Bergi84/GrowOMatic
12- 2 layers84 × 84 mm

- 2 layers96 × 96 mm

- 4 layers50 × 50 mm

- 4 layers40 × 63 mm

- 4 layers50 × 45 mm

- 4 layers50 × 40 mm

- 4 layers21.3 × 83 mm

- 4 layers54 × 100 mm

- 2 layers82 × 50 mm

- 4 layers30 × 30 mm

- 4 layers45 × 36.6 mm

- 2 layers279.5 × 36.6 mm

Similar boards
- 2 layers84 × 50 mm

Bldcdriver
corvusoul/BLDC-USB
USB compatible BLDC Motor Driver with RP2040 Microcontroller, DRV8304 Gate Driver and Infineon MOSFETs.
15 parts1 - 4 layers90 × 87.6 mm

- 4 layers73.6 × 59.8 mm

Leak sensor v1
lewipewi/leakwatch
A multi-channel leak sensor for equipment enclosures. Instead of reporting "wet / dry" like a normal leak probe, it measures how wet each enclosure is, on a separate channel per enclosure, and carries a second circuit…
90 parts - 2 layers52 × 51.3 mm

- 2 layers

CourseWorkScheme
NasterVill/BSUIR_Labs
Here are gathered all the labs from my CMSnN studying course.
40 parts27Apache-2.0 - 2 layers68.5 × 53.3 mm

Iot wifi uno hw
iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno
56 parts26 - 2 layers37.1 × 8.6 mm

- 2 layers273.1 × 186.1 mm

Ion pump controller
AlexW-proj/ion-pump-controller
open source controller that takes 24V in and spits out 0 - 7000V, set by a knob with an adjustable ramp time
63 parts2
Questions
How big is the SensorNode PCB?
It measures 35.5 × 35 mm and has 4 copper layers, 1.61 mm thick.
What parts does the SensorNode use?
115 parts, built around the RP2040, AP63357QZV, MCP6001R-I/OT and W25Q16JVUXIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SensorNode KiCad files?
From the Bergi84/GrowOMatic repository on GitHub, at the commit this page was made from: the board is Hardware/sensorNode/sensorNode.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SensorNode design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bergi84 before reusing the design.