Skip to the content
4 layers58.3 × 75.9 mmControl module pcb, the printed circuit board in 3D

This repo contains the schematic and PCB for the control module. The firmware for the control module can be found here: https://github.com/BenMartens15/reviveride-control-module-firmware

Size
58.3 × 75.9 mm
Copper layers
4
Thickness
4.69 mm
Parts
83
Nets
69
Pads
305
Tracks, vias
447, 141
Pours
11
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
9 Nov 2023
Updated
28 May 2024

Overview

Control module pcb is an open-source printed circuit board by BenMartens15, from the BenMartens15/reviveride-control-module-pcb repository on GitHub. It is a 4-layer board of 58.3 × 75.9 mm with 83 parts on 69 nets, routed with 447 tracks and 141 vias.

It is built around the ESP32-S3-WROOM-1-N8, MPQ4436GRE-AEC1-P and MIC2039BYM6-TR, with the RT9080-33GJ5 among its other parts. Its parts include 32 capacitors, 27 resistors, 13 ICs, 5 connectors and 1 diode. It belongs with the ESP32 boards of this library.

Main components

4

README

README.md

ReviveRide: Modernizing Vintage Autos

Project Overview

ReviveRide was developed as a capstone project for the Computer Engineering Technology program at Conestoga College. The goal of ReviveRide is to bring features found on modern vehicles to older vehicles. The project provides a dash camera, backup camera, head unit touchscreen with Android Auto, blind spot object detection, and remote start in an all-in-one, easy to install kit.

Control Module

The control module is responsible for providing power to every component in the system when the car is turned on. It is also responsible for receiving the remote start signal from the key fob and switching voltages to the ignition system to start the car.

This repo contains the schematic and PCB for the control module. The firmware for the control module can be found here: https://github.com/BenMartens15/reviveride-control-module-firmware

Parts

83
QtyValueFootprintReferences
747uCapacitor_SMD:C_1206_3216MetricC2A, C2B, C7, C9, C11, C13, C15
610kResistor_SMD:R_0603_1608MetricR2, R9, R12, R15, R18, R21
5100uCapacitor_SMD:C_1206_3216MetricC8, C10, C12, C14, C16
518kResistor_SMD:R_0603_1608MetricR10, R13, R16, R19, R22
51nCapacitor_SMD:C_0603_1608MetricC17, C19, C21, C23, C25
5220nCapacitor_SMD:C_0603_1608MetricC18, C20, C22, C24, C26
5ITS4200SSJDXUMA1ITS4200SSJDXUMA1:PG-DSO-8-24_INFU9, U10, U11, U12, U13
5MIC2039BYM6-TRMIC2039BYM6_TR:SOT-23-6_M6_MCHU4, U5, U6, U7, U8
4287Resistor_SMD:R_0603_1608MetricR11, R14, R17, R20
3100kResistor_SMD:R_0603_1608MetricR1, R23, R25
20.1uCapacitor_SMD:C_0603_1608MetricC1C, C1D
2100KResistor_SMD:R_0603_1608MetricR5, R7
210uCapacitor_SMD:C_1206_3216MetricC1A, C1B
233kResistor_SMD:R_0603_1608MetricR24, R26
10Resistor_SMD:R_0603_1608MetricR4
10.22uCapacitor_SMD:C_0603_1608MetricC4
110nCapacitor_SMD:C_0603_1608MetricC3
1145Resistor_SMD:R_0603_1608MetricR8
119.1KResistor_SMD:R_0603_1608MetricR6
11uCapacitor_SMD:C_0603_1608MetricC1
1220Resistor_SMD:R_0603_1608MetricR27
13.3uCapacitor_SMD:C_0603_1608MetricC2
14.7uCapacitor_SMD:C_0603_1608MetricC6
14.7uPA4342_472NLT:IND_PA4342_PULL1
147pCapacitor_SMD:C_0603_1608MetricC5
162KResistor_SMD:R_0603_1608MetricR3
1ENButton_Switch_SMD:SW_SPST_TL3305BSW1
1ESP32-S3-WROOM-1PCM_Espressif:ESP32-S3-WROOM-1U1
1Ignition Outputs1776275-5:TE_1776275-5J4
1LEDLED_SMD:LED_0603_1608MetricD1
1MPQ4436GRE-AEC1-PMPQ4436GRE-AEC1-Z:QFN-4x4_MPQ4436-AEC1_MNPU2
1Power Input1776275-2:TE_1776275-2J5
1Power Outputs1-1776275-2:TE_1-1776275-2J3
1Programming HeaderConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ1
1Programming JumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ2
1RT9080-33GJ5RT9080_33GJ5:TSOT-23-5_RITU3
1~Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP1

The 81 most common of 83 parts.

Similar boards

  • 4 layers56.5 × 99.8 mmBitaxeGamma, the printed circuit board in 3D

    BitaxeGamma

    bitaxeorg/bitaxeGamma

    Bitaxe based on the BM1370 from the S21 Pro

    147 parts432CERN-OHL-S-2.0
  • 4 layers84.5 × 129.5 mmBitaxeHex, the printed circuit board in 3D

    BitaxeHex

    bitaxeorg/ultraHex

    multi-ASIC Bitcoin miner

    369 parts190CERN-OHL-S-2.0
  • 4 layers138.1 × 104.6 mmV7-kaleido, the printed circuit board in 3D

    V7-kaleido

    vroland/epdiy-hardware

    Hardware design files for EPDiy: https://github.com/vroland/epdiy.

    140 parts75CC-BY-SA-4.0
  • 4 layers56.5 × 99.8 mmBitaxeMax, the printed circuit board in 3D

    BitaxeMax

    bitaxeorg/bitaxeMax

    bitaxe based on the BM1397 ASIC from the Antminer S17

    153 parts17CERN-OHL-S-2.0
  • 6 layers55 × 120 mmBitForge Nano, the printed circuit board in 3D

    BitForge Nano

    WantClueTechnologies/BitForge-Nano

    This project presents a fully open-source Bitcoin mining hardware platform, designed for transparency, modularity, and extensibility.

    220 parts15CERN-OHL-S-2.0
  • 2 layers25.6 × 44.5 mmEsp32-chungus lipo, the printed circuit board in 3D

    Esp32-chungus lipo

    ayan4m1/esp-chungus

    Chungus is an ESP32-S3 development board created as a learning exercise in KiCad.

    27 parts2MIT
  • 4 layers227.8 × 132.5 mmPanel, the printed circuit board in 3D

    Panel

    YDrip/ydrip-pcb

    YDrip hardware files

    556 parts2CERN-OHL-W-2.0
  • 2 layers96.2 × 129.6 mmPendant, the printed circuit board in 3D

    Pendant

    cumhuronat/mr-1-openpendant

    An opensource pendant project MR-1 CNC

    62 parts1

Questions

How big is the Control module pcb PCB?

It measures 58.3 × 75.9 mm and has 4 copper layers, 4.69 mm thick.

What parts does the Control module pcb use?

83 parts, built around the ESP32-S3-WROOM-1-N8, MPQ4436GRE-AEC1-P, MIC2039BYM6-TR and RT9080-33GJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Control module pcb KiCad files?

From the BenMartens15/reviveride-control-module-pcb repository on GitHub, at the commit this page was made from: the board is control-module-pcb.kicad_pcb and its schematic ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Control module pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask BenMartens15 before reusing the design.