Skip to the content
2 layers139.7 × 116.8 mmInverter F446, the printed circuit board in 3D

Downscaled three-phase half-bridge inverter

Size
139.7 × 116.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
111
Nets
138
Pads
365
Tracks, vias
613, 8
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
25 Dec 2023
Updated
10 Mar 2024

Overview

Inverter F446 is an open-source printed circuit board by Bausager, from the Bausager/Downscaled_Inverters repository on GitHub. It is a 2-layer board of 139.7 × 116.8 mm with 111 parts on 138 nets, routed with 613 tracks and 8 vias.

It is built around the MCP6004-E/P, BC547 and BC557. Its parts include 37 resistors, 34 capacitors, 15 inductors, 9 diodes and 9 transistors. It belongs with the power boards of this library.

Main components

3

README

README.md

Downscaled three-phase half-bridge inverter

This project is an inverter framework for students and researches to learn, test and research state-of-the-art phase-lock-loops and control algorithms. The inverters manly uses jellybean components, found free at the electronic laboratory for electrical engineers at Aarhus University(AU) for their students. The purpose is to make an inexpensive and save platform instead of having to work with line voltages. This means all the components can be downscaled to work with 5 volt. Here the inverter can be powered by a USB and supply its own grid.

This is an accumulative project, this means it's going to improve over time. There's a limited number of people working on this which means updates somethimes takes sometime. If you want to help improve, collaborate or have something in your back pocket you want to integrate, you are very welcome to contact me! The more the merrier!

There're some restrictions! Since this is an open-source, student use it and research need to be understood and replicated, the code needs to be written in such a way that other prople can understand it. Even if the person isn't an expert. That is importent!

New fueatures waiting to be implemented can be found on the github project site Not a Generator (NaG)

University Teaching

Phase-Lock-Loop(PLL)

Many students at AU before this project have worked in PLLs for their bachelor thesis that meant a large part of the project was making an inverter from scratch. This allows students not to reinvent the wheel if they are interested in other aspects than the hardware side. With this the students can generate the grid and test their PLL on the some PCB, which lowest the bar of entre and in turn makes student projects and bachelor thesis more focused.

Control

The students have the ability to develop control methods and test it only with a one inverter and output impedances. Here different filter configuration or switching methods can also influence the THD which the students new have a direct way to interacting with.

Power Factor Correction(PFC)

This PCB also allows to make it work as a PFC where control, THD and other aspects can be looked into. Here a PFC input with a inverter output can also be pursued.

Research Projects

Even if grid impedances does not downscale well, control algorithms, stability and many other advanced concept can be tested. In the future, a new version of the PCB will be made for increasing the DC Link voltage to accommodate some of the downsides of the downscaled grid impedances. As the time of writing the increase of DC Link voltage would be around 24V. Now multiply inverters can be chained to a common grid to research stability. Here the goal is not only to use the same micro-controller and control but to use different kinds of controls, PLLs, micro-controller, changing grid impedances, short-circuits and much more. This will also include black start, synchronisation and much more.

Collaborators

This project was initially an idea developed under Associate Professor Uffe Jakobsen for his classes and research into inverter control. He also has students doing their project and bachelor thesis helping expand on this project.

A contributor Christian Lind Vie Madsen helps optimising written code for better performance.

And project maintainer- Me! Michelle Bausager A former student and research assistance at AU who likes to work with all aspects of inverters.

Git Workflow.

For students or others who want to contribute, a workflow is needed to make sure everything still works in the end. main.c on the main branch is written in such a way that every function is implementet but commented out. This means there's a funtional implementation of every feature avaliable ready to use.

To make sure the workflow is allined a smal guide it here presented;

Download the repository and work on an existing branch

Create of find a folder for the Git project and open your terminal in that folder. Grab the git link and use the following git commands to download the project

text
git clone https://github.com/Bausager/Downscaled_Inverters.git

It’s good practice to get an overview of the project, especially the branches. It's also here you would start if you come back to code some more!

text
git pull
git branch -a

There’s probably a need to code in a specific branch, if you're not in the right branch you need to select it from the list. Now you need to update it localy as follows:

text
git checkout specific_branch
git pull origin specific_branch

You can now start to make changes to the code! To commit it, firstly you need to make sure the branch is up to date. Then the "git add -A" commits all files and now you have to write some comments on the changes you made Now you can push it to git!

text
git pull origin specific_branch
git add -A
git commit -m "Head line for changes
>
>
> Discription of what has been done "
git push origin specific_branch

Make a new branch

Firstly make sure you have been invited to be a contributor. Then starting working on a new feature first pull from the main branch

text
git pull origin main

Now you need to create a new branch where you can make your new implementations. Remember to give it a valuable name, such as "UltraCoolNewPLL". After creating it you need to be in ýour new branch, with the opteration "checkout".

text
git branch new_branch
git checkout new_branch

You can now start to make changes to the code! Since it's a new branch you don't need to make sure it's already updated as you do after you've commitet the branch for the first time. Then the "git add -A" commits all files and now you have to write some comments on the changes you made.

text
git add -A
git commit -m "Head line for changes
>
>
> Discription of what has been done "

First time pushing a new branch you need to push it like this

text
git push -u origin new_branch

After that you can simply go to the workflow presented in Download the repository and work on an existing branch

Marge branch to main

When the feature is done and tested, it's time to merge with the main branch. This is the time and place where everything can go wrong! Make sure main.c is steamlined like seen in the current main.c. We're trying to implement every feature just outcommedted, that means you can just outcomment the feature to make it work. At least that is what we're trying to do, to have a good example for the implementation for others to look at. When we merge we need to be on the main branch.

text
git checkout main
git pull origin main

Now we can merge the branch into the main branch.

text
git merge new_branch
git push origin main

Now we’re ready to delete our branch. First we see what branches are merged, just to make sure we’re deleting the right one. Then we delete the local branch and then the remote branch we associated with the remote repository.

text
git branch --merged
git branch -d new_branch
git push origin --delete new_branch

And now it's done.

Parts

111
QtyValueFootprintReferences
171µFCapacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mmC1, C2, C3, C4, C5, C6, C10, C11, C12, C13, C14, C15, C16, C23, C31, C34 +1
151mHInductor_THT:L_Axial_L12.0mm_D5.0mm_P15.24mm_Horizontal_Fastron_MISCL1, L2, L3, L4, L6, L7, L8, L9, L10, L11, L12, L13, L14, L15, L16
103k3Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR11, R12, R13, R14, R20, R21, R25, R26, R36, R37
91N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8, D9
91kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R6, R9, R19, R24, R29, R30, R31, R32
7100nFCapacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mmC17, C18, C19, C20, C21, C22, C24
61.5Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR10, R15, R18, R38, R39, R40
6470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R3, R4, R5, R7, R8
6510Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR16, R17, R22, R23, R27, R28
6??Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mmC25, C26, C27, C28, C29, C30
6BC547Package_TO_SOT_THT:TO-92_InlineQ1, Q3, Q4, Q6, Q7, Q9
3100µFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC7, C8, C32
3BC557Package_TO_SOT_THT:TO-92_InlineQ2, Q5, Q8
3INA181Package_TO_SOT_SMD:SOT-23-6U2, U3, U4
1220µFCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC33
1MCP6004Package_DIP:DIP-14_W7.62mm_SocketU5
1NUCLEO-F446RENUCLEO-F446RE:MODULE_NUCLEO-F446REU1
1Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1
1Screw_Terminal_01x03TerminalBlock:TerminalBlock_bornier-3_P5.08mmJ2

Similar boards

  • 2 layers56 × 65 mmSeaTalk1, the printed circuit board in 3D

    SeaTalk1

    dotnet/iot

    This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

    24 parts2.4kMIT
  • 2 layers148.8 × 132.2 mmUsbflashprog, the printed circuit board in 3D

    Usbflashprog

    robsonsmartins/usbflashprog

    A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

    125 parts36
  • 2 layers83.8 × 72.4 mmVoice board, the printed circuit board in 3D

    Voice board

    Windfisch/analog-synth

    A low-cost semimodular analog synthesizer

    131 parts31GPL-3.0
  • 2 layers13 × 0.5 mmKamstrup, the printed circuit board in 3D

    Kamstrup

    Hal9k-dk/kamstrup

    Kamstrup IR-øje

    11 parts19
  • 2 layers167.8 × 200.6 mmRandom Jazz Generator, the printed circuit board in 3D

    Random Jazz Generator

    telec16/modular-synth

    Little side project, don't expect much updates.

    132 parts16
  • 2 layers100 × 100 mmWhiteBoy, the printed circuit board in 3D

    WhiteBoy

    nodep/NovaBox

    Circuit and PCB design of simple Bluetooth stereo receiver and amplifier

    111 parts11GPL-3.0
  • 2 layers53 × 55.1 mmLedclock sensor, the printed circuit board in 3D

    Ledclock sensor

    luk6xff/led-clock

    LED clock with some fancy features

    35 parts9MIT
  • 2 layers135.8 × 128.4 mmMoog Filter, the printed circuit board in 3D

    Moog Filter

    jojo-monk/Yusynth-MiniMoog-Filter

    Eurorack adaptation

    78 parts8

Questions

How big is the Inverter F446 PCB?

It measures 139.7 × 116.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Inverter F446 use?

111 parts, built around the MCP6004-E/P, BC547 and BC557. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Inverter F446 KiCad files?

From the Bausager/Downscaled_Inverters repository on GitHub, at the commit this page was made from: the board is STM32F446/KiCad Rev. 1/Inverter F446.kicad_pcb and its schematic STM32F446/KiCad Rev. 1/Inverter F446.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Inverter F446 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Bausager before reusing the design.