

Random Jazz Generator
Little side project, don't expect much updates.
- Size
- 167.8 × 200.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 132
- Nets
- 160
- Pads
- 560
- Tracks, vias
- 829, 19
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 May 2020
- Updated
- 25 Jul 2023
Overview
Random Jazz Generator is an open-source printed circuit board by telec16, from the telec16/modular-synth repository on GitHub. It is a 2-layer board of 167.8 × 200.6 mm with 132 parts on 160 nets, routed with 829 tracks and 19 vias.
It is built around the TL082, 74HCT157D and 74HCT4520D, with the 74HCT04D, 74HCT173D and 74HCT4051D among its other parts. Its parts include 40 resistors, 26 capacitors, 18 diodes, 15 ICs and 9 connectors.
Main components
11TL082
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 13V/us 2 2.5nA 36V 3MHz 3mV 85dB Short-Circuit Protection SOP-8 FET Input Amplifiers ROHSGcoreOperational Amplifier74HCT157D
SO-16-40℃~+125℃ 160uA 16ns@4.5V,50pF 4.5V~5.5V 4mA 4mA 74HCT 8/4 Multiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches, Multiplexers, Decoders74HCT4520D
SO-16-40℃~+125℃ 2 4.5V~5.5V 58MHz Asynchronous Divide-by-2 Falling Edge、Rising Edge Synchronous Up Counter SO-16 Counters, Dividers ROHSNexperiaCounters / Dividers74HCT04D
SO-14-40℃~+125℃ 1 19ns@4.5V,50pF 2V 2uA 3.7V 4.5V~5.5V 400mV 4mA 4mA 6 74HCT 800mV SO-14 Inverters ROHSNexperiaInverters74HCT173D
SOP-16-40℃~+125℃ 0ns 12ns 20ns@4.5V,50pF 3.5pF 4 4 4.5V~5.5V 6mA 6mA 74HCT Series 80MHz 8uA Asynchronous D-Type Reset Rising Edge Tri-State SOP-16 Flip Flops ROHSNexperiaFlip Flops74HCT4051D
SOIC-16-40℃~+125℃ -5V~5V、4.5V~5.5V 13ns 25ns 28ns 5pF 70Ω 8:1 SOIC-16 Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, Multiplexers74HCT74D
SOIC-14-40℃~+125℃ 1 2 3.5pF 3ns 4.5V~5.5V 40uA 44ns@4.5V,50pF 4mA 4mA 59MHz 5ns 74HCT Series Asynchronous Complementary D-Type Rising Edge Set and Reset SO-14 Flip Flops ROHSNexperia74 Series74HCT85D
SOIC-16Multi-device cascading SOIC-16 Digital Comparators ROHSNexperiaDigital ComparatorsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)BC557
TO-921 PNP 100mA 100nA 150MHz 45V 500mW 6V 800 90mV、250mV PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
README
README.mdTelec's Modular Synth
Little side project, don't expect much updates.
List of stuff I want to make
| 0% | 10% | 20% | 50% | 65% | 70% | 75% | 80% | 100% |
|---|---|---|---|---|---|---|---|---|
| Idea | POC | Schematic | Layout | Artwork | Final checkup | Prod | Tests | Done |
Modules
- VCO
- 3340
- Schmitt inverter
- Opamp V1
- Opamp V2
- LFO
- Hex Inverter
- Sequencer
- µC
- random jazz generator
- Random generator
- zener
- µC
- ADSR
- Opamp
- Opamp
- VCA
- LM13700
- Vactrol
- LM13700
- Quantizer (CV correction)
- µC
- µC
- VCF
- ?
- Drum kit
- ???
- Frequency multiplier/divider
- CD4046 PLL V1
- CD4046 PLL V2
- CD4046 PLL V1
- Wavefolder
- Bipolar
- Opamp
- Bipolar
- CV Glider
- RC circuit
- RC circuit
- Scope
- µC
- µC
Instruments
- MiniSynth
- MIDI I/O + CV Out keypad
Releases
- ADSR
- CV Glider
- VCA
- Wavefolder
- VCO
- PLL
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C103, C104, C106, C107, C201, C202, C203, C204, C301, C302, C303, C304, C401, C402, C403, C404 +2 |
| 15 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R101, R102, R103, R104, R113, R302, R303, R304, R305, R306, R406, R505, R506, R507, R508 |
| 11 | LED | LED_SMD:LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm | D101, D301, D302, D303, D304, D305, D403, D501, D502, D503, D504 |
| 8 | 100k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV301, RV302, RV303, RV304, RV305, RV306, RV307, RV308 |
| 8 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R110, R301, R404, R408, R501, R502, R503, R504 |
| 5 | 10n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C105, C501, C502, C503, C504 |
| 5 | BC547 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q102, Q201, Q202, Q401, Q402 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R108, R109, R111, R112 |
| 4 | LED | LED_SMD:LED_1206_3216Metric_Castellated | D102, D103, D104, D105 |
| 4 | Mounting_Holes | Kosmo_panel:Kosmo_Panel_Dual_Mounting_Holes | H101, H102, H103, H104 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R402, R405, R407 |
| 3 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D106, D401, D402 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R105, R106, R107 |
| 3 | 74HCT157 | Package_DIP:DIP-16_W7.62mm_LongPads | U303, U304, U404 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R401, R403 |
| 2 | 2k7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R201, R202 |
| 2 | 74HCT4520 | Package_DIP:DIP-16_W7.62mm_LongPads | U102, U401 |
| 2 | Reload | Button_Switch_THT:SW_PUSH_6mm | SW301, SW402 |
| 1 | 10u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C101 |
| 1 | 15k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R203 |
| 1 | 1u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C102 |
| 1 | 220n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C205 |
| 1 | 33k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R205 |
| 1 | 68k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R204 |
| 1 | 74ACHT595 | Package_DIP:DIP-16_W7.62mm_LongPads | U202 |
| 1 | 74HCT04 | Package_DIP:DIP-14_W7.62mm_LongPads | U201 |
| 1 | 74HCT173 | Package_DIP:DIP-16_W7.62mm_LongPads | U406 |
| 1 | 74HCT40105 | Package_DIP:DIP-16_W7.62mm_LongPads | U302 |
| 1 | 74HCT4051 | Package_DIP:DIP-16_W7.62mm_LongPads | U301 |
| 1 | 74HCT74 | Package_DIP:DIP-14_W7.62mm_LongPads | U402 |
| 1 | 74HCT85 | Package_DIP:DIP-16_W7.62mm_LongPads | U403 |
| 1 | Auto-reload | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP401 |
| 1 | BC557 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q101 |
| 1 | CV | telec:JackHole | J102 |
| 1 | Clock | telec:JackHole | J107 |
| 1 | Duration Length | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW401 |
| 1 | EuroPower | telec:EuroPower | J101 |
| 1 | Gate | telec:JackHole | J104 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U101 |
| 1 | RND | telec:JackHole | J103 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW101 |
| 1 | SST39SF010 | telec:PLCC-32_THT-Socket | U405 |
| 1 | TL082 | Package_DIP:DIP-8_W7.62mm_LongPads | U103 |
| 1 | Trig1 | telec:JackHole | J105 |
| 1 | Trig2 | telec:JackHole | J106 |
| 1 | Trig3 | telec:JackHole | J108 |
| 1 | Trig4 | telec:JackHole | J109 |
| 1 | telec | logo:telec-32 | LOGO1 |
More from telec16/modular-synth
11- 2 layers102.5 × 200 mm

- 2 layers50 × 174 mm

- 2 layers50 × 200 mm

- 2 layers50 × 200 mm

- 2 layers25 × 200 mm

- 2 layers40 × 200 mm

- 2 layers25 × 200 mm

- 2 layers30 × 200 mm

- 2 layers25 × 200 mm

- 2 layers25 × 200 mm

- 2 layers

Similar boards
- 2 layers297.2 × 180.3 mm

- 4 layers244.5 × 393.4 mm

- 2 layers99.1 × 87.6 mm

- 2 layers368.3 × 215.9 mm

- 2 layers333.4 × 149.9 mm

- 2 layers333.4 × 149.9 mm

- 4 layers209.5 × 108.5 mm

- 2 layers143 × 175 mm

VideoBoard
Cptscorcher/Excallibur-64
A reimagining of the seminal Excalibur 64 Computer
55 partsGPL-3.0
Questions
How big is the Random Jazz Generator PCB?
It measures 167.8 × 200.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Random Jazz Generator use?
132 parts, built around the TL082, 74HCT157D, 74HCT4520D and 74HCT04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Random Jazz Generator KiCad files?
From the telec16/modular-synth repository on GitHub, at the commit this page was made from: the board is RJG/Random Jazz Generator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Random Jazz Generator design in my own project?
Its repository states no licence, so its author keeps all rights: ask telec16 before reusing the design.