
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Driver brake tail is an open-source printed circuit board by Bankst, from the Bankst/prelude-taillights repository on GitHub. It is a 2-layer board of 195 × 136 mm with 529 parts on 266 nets, routed with 1,222 tracks and 1,292 vias.
It is built around the WS2812B. Its parts include 263 capacitors and 263 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 263 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +247 |
| 263 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +247 |
| 2 | Conn_01x01_Female | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | 5V, GND |
| 1 | SolderWirePad_1x01_SMD_1x2mm | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | DIN |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 195 × 136 mm and has 2 copper layers, 1.6 mm thick.
529 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Bankst/prelude-taillights repository on GitHub, at the commit this page was made from: the board is driver-brake-tail/driver-brake-tail.kicad_pcb and its schematic driver-brake-tail/driver-brake-tail.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Bankst before reusing the design.