4 layers93.5 × 101 mm
4 layers117.6 × 75.7 mm
ProjectAtlas first layout
BYU-Racing/SH_PCBSensor Hub PCB Development
- Size
- 117.6 × 75.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 119
- Nets
- 106
- Pads
- 429
- Tracks, vias
- 1, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Oct 2026
- Updated
- 28 Oct 2026
Overview
ProjectAtlas first layout is an open-source printed circuit board by BYU-Racing, from the BYU-Racing/SH_PCB repository on GitHub. It is a 4-layer board of 117.6 × 75.7 mm with 119 parts on 106 nets, routed with 1 track and 0 vias.
It is built around the STM32G474RET6, MPM3610GQV-P and TJA1051T/3/1, with the PACDN042Y3R, SM5817PL-TP and ST1L05APU33R among its other parts. Its parts include 38 resistors, 37 capacitors, 15 connectors and 2 ICs. It belongs with the STM32 boards of this library.
Main components
8
STM32G474RET6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 512KB 52 ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MPM3610GQV-P
QFN-20(3x5)-40℃~+125℃ 1 1.2A 1.6mm 200uA、700uA 2MHz 3mm 4.5V~21V 5mm 800mV~18.48V Over-temperature protection、Over Current Protection、Under Voltage Protection、Automatic fault recovery、Programmable output voltage、Light load efficient mode Step-down type QFN-20(3x5) DC-DC Power Modules ROHSMonolithic Power SystemsDC-DC Power ModulesTJA1051T/3/1
-- CAN Transceivers ROHSNXP SemiconductorsCAN Transceivers
PACDN042Y3R
SOT-23-40℃~+85℃ 1nA 2 30pF 5.5V、6.1V 6.2V 6.8V ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
SM5817PL-TP
SOD-123FL-65℃~+125℃ 1 Independent 1A 20V 30A 450mV@1A SOD-123FL Schottky Diodes ROHSMicro Commercial ComponentsSchottky Diodes
ST1L05APU33R
DFN-6(3x3)0.003%Vout 0℃~+125℃@(Tj) 1 1.3A 3.3V 5.25V 500mV@(1.3A) 650uA 65dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TPD2EUSB30DRT
SOT(9x3)-40℃~+85℃ 0.7pF 2 45W 5.5V 5A@8/20us 7V 8V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT(9x3) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100 nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C11, C12, C13, C14, C16, C17, C20, C21, C23, C32 |
| 13 | 1k | Resistor_SMD:R_0201_0603Metric | R4, R12, R16, R19, R21, R24, R25, R27, R29, R31, R34, R36, R38 |
| 13 | 2k | Resistor_SMD:R_0201_0603Metric | R6, R10, R14, R17, R20, R22, R23, R26, R28, R30, R33, R35, R37 |
| 12 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C8, C9, C18, C22, C25, C30, C37, C38, C40 |
| 8 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C15, C24, C26, C27, C28, C29, C36, C39 |
| 7 | 436500300 | Project_Atlas_Footprints:CONN_SD-43650-001_03_MOL | J1, J4, J5, J7, J8, J9, J10 |
| 7 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | 3V3-Conn1, 5V-Conn1, 12V-Conn1, 12V-in1, CAN_Header1, J2, USB_Test1 |
| 6 | Conn_01x03_Socket | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J11, J12, J13, J14, J15, J16 |
| 4 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | 3.3v_test1, 5v_test1, 12v_test1, GNDtest1 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R9, R18 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R8, R11 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R7, R32 |
| 2 | SW_MEC_5G | Project_Atlas_Footprints:TS-1187A-B-A-B | BOOT1, RESET1 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_8x10 | EC_12V1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 19.1k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 22uF | Capacitor_SMD:CP_Elec_4x5.4 | EC_3V3 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C31 |
| 1 | 436500402 | Project_Atlas_Footprints:CONN_SD-43650-001_04_MOL | JMAIN1 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.4 | EC_5V1 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J3 |
| 1 | FerriteBead_600R@100MHz | Project_Atlas_Footprints:GZ1608D601TF | FB1 |
| 1 | LED_green_3.3v | LED_SMD:LED_0805_2012Metric | LED-3V3 |
| 1 | LED_red_IOpin | LED_SMD:LED_0805_2012Metric | LEDCAN1 |
| 1 | LED_yellow_5v | LED_SMD:LED_0805_2012Metric | LED-5V1 |
| 1 | MPM3610GQV-P | Project_Atlas_Footprints:MPM3610GQV-P | 12->5V1 |
| 1 | PACDN042Y3R | Project_Atlas_Footprints:SOT-23_ONS | U2 |
| 1 | SM5817PL-TP | Project_Atlas_Footprints:SM5817PL-TP | CR1 |
| 1 | ST1L05APU33R | Project_Atlas_Footprints:DFN_5APU33R_STM | 5->3V3 |
| 1 | STM32G474RET6 | Project_Atlas_Footprints:STM32G474RE | U1 |
| 1 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | TJACAN2 |
| 1 | TPD2EUSB30 | Package_TO_SOT_SMD:Texas_DRT-3 | ESD1 |
| 1 | USB4105-GF-A | Project_Atlas_Footprints:GCT_USB4105-GF-A | J6 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | STLINK1 |
More from BYU-Racing/SH_PCB
1Similar boards
- 4 layers125.3 × 86 mm
Project Atlas
higg22-git/Project-Atlas
Four-layer STM32G474 control board that replaced the legacy electronics on BYU Formula SAE Electric's race car. KiCad schematic, layout and manufacturing package.
124 parts - 2 layers36.8 × 47 mm
ButtonInterfaceBoard 0-2
Govish/FusIon-Pack
Design files and documentation for the FusIon Battery Pack
36 partsMIT - 4 layers33 × 41.9 mm
- 2 layers50 × 50 mm
HolidayExpress
joshkephart/holidayExpress
esp32 project for a Lego train motor and servo control
21 parts - 4 layers66 × 88 mm
- 4 layers56.6 × 39 mm
Multimodal Actuator mk2
TheUnknownAlias/betr_kicad_resources
This repository contains shared KiCad symbols and footprints for our projects.
91 parts - 4 layers79.4 × 56.2 mm
USBLabTool
bradencamp/ECE-Lab-USB-MultiTool
This USB Multi-function Laboratory Instrument will be inexpensive and therefore less capable than the AD2 or ADALM 2000 while still fulfilling the requirements for most laboratory exercises in the undergraduate ECE…
250 parts1 - 4 layers162 × 87 mm
Questions
How big is the ProjectAtlas first layout PCB?
It measures 117.6 × 75.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ProjectAtlas first layout use?
119 parts, built around the STM32G474RET6, MPM3610GQV-P, TJA1051T/3/1 and PACDN042Y3R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProjectAtlas first layout KiCad files?
From the BYU-Racing/SH_PCB repository on GitHub, at the commit this page was made from: the board is ProjectAtlas-first-layout.kicad_pcb and its schematic ProjectAtlas.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProjectAtlas first layout design in my own project?
Its repository states no licence, so its author keeps all rights: ask BYU-Racing before reusing the design.