

Cvtt pcb
Computer Vision-Based Table Tennis Robotic System
- Size
- 66 × 88 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 125
- Pads
- 322
- Tracks, vias
- 557, 123
- Pours
- 86
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Jul 2025
- Updated
- 29 Sep 2025
Overview
Cvtt pcb is an open-source printed circuit board by mjao1, from the mjao1/cvtt-pcb repository on GitHub. It is a 4-layer board of 66 × 88 mm with 69 parts on 125 nets, routed with 557 tracks and 123 vias.
It is built around the STM32G0B1RET6, MPM3610GQV-P and TPS62203DBV, with the BSS138 and PTVS20VZ1USKYL among its other parts. Its parts include 27 resistors, 13 capacitors, 9 connectors, 6 diodes and 5 ICs. It belongs with the STM32 boards of this library.
Main components
5STM32G0B1RET6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 144KB 32 Bit 512KB 60 64MHz ARM Cortex-M0+ Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MPM3610GQV-P
QFN-20(3x5)-40℃~+125℃ 1 1.2A 1.6mm 200uA、700uA 2MHz 3mm 4.5V~21V 5mm 800mV~18.48V Over-temperature protection、Over Current Protection、Under Voltage Protection、Automatic fault recovery、Programmable output voltage、Light load efficient mode Step-down type QFN-20(3x5) DC-DC Power Modules ROHSMonolithic Power SystemsDC-DC Power ModulesTPS62203DBV
SOT-23-5-40℃~+85℃@(TA) 1 15uA 1MHz 2.5V~6V 3.3V 300mA Buck Buck Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsPTVS20VZ1USKYL
0603-40℃~+125℃ 100nA 20V 22.2V 220W 260pF 48.3V 6A TVS 0603 ESD and Surge Protection (TVS/ESD) ROHSNexperiaUncategorised
README
README.mdCVTT-PCB
Custom Embedded PCB for a Computer Vision-Based Table Tennis Robotic System
Core Components
- Microcontrollers and Compute:
- STM32G0B1RET6
- Raspberry Pi Zero 2 W
Actuation System
- Motor Driver Support:
- 2 Brushless DC motors for flywheels
- 2 Servos for direction and distance control
- 1 Stepper motor for ball feeding
Power and Regulation
- Power Circuitry:
- 12V input
- E-fuse circuit
- 12V to 5V LDO Regulator
- 5V to 3.3V LDO Regulator
User Interface
- Controls and Feedback:
- Manual/CV mode switch
- LCD screen for manual control
- LCD navigation buttons
- Diagnostic LEDs
STM32G0B1RET6 Pinout
Inputs
| Signal | Pin |
|---|---|
| UART_RX | PB7 |
| LCD_MISO | PD5 |
| LCD_BUTTONC | PC4 |
| LCD_BUTTOND | PC5 |
| LCD_BUTTONU | PA7 |
| CV_MODE | PB10 |
| PB13 | PB13 |
Outputs
| Signal | Pin | Signal | Pin | Signal | Pin | Signal | Pin |
|---|---|---|---|---|---|---|---|
| UART_TX | PB6 | LED_G | PC6 | DRV_EN | PA0 | LED_R | PA9 |
| LCD_RESET | PD2 | PWMB | PC7 | DRV_STEP | PA1 | LED_B | PA10 |
| LCD_LED | PD3 | STBY | PC8 | DRV_DIR | PA2 | LCD_CS | PA15 |
| LCD_DC/RS | PD4 | PWMA | PC11 | BIN2 | PA3 | SERVO1_PWM | PB0 |
| LCD_MOSI | PD6 | DRV_SLEEP | PD8 | BIN1 | PA4 | SERVO2_PWM | PB1 |
| LCD_SCK | PB3 | DRV_RST | PD9 | AIN1 | PA5 | EFUSE_EN | PB14 |
| AIN2 | PA6 |
Tag
| Signal | Pin |
|---|---|
| SWDIO | PA13 |
| SWKCLK | PA14 |
RPI Zero 2 W Pinout
Inputs
| Signal | Pin |
|---|---|
| SC1174 input | — |
| UART_TX | GPIO15 |
Outputs
| Signal | Pin |
|---|---|
| UART_RX | GPIO14 |
Next Steps
- Programming STM machine logic state machine
- Design LCD user interface for manual and vision modes
- Programming RPI CV player recognition algorithm
- Using RPI AI camera (SC1174) for inference acceleration
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11, R12, R13, R18, R19, R32, R34 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C10 |
| 3 | 1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C13 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R31 |
| 2 | 10µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C11 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23-3 | Q7, Q8 |
| 2 | PTVS20VZ1USK | Diode_SMD:Nexperia_DSN1608-2_1.6x0.8mm | D1, D2 |
| 1 | 10µH | Inductor_SMD:L_Bourns_SRU5016_5.2x5.2mm | L1 |
| 1 | 12V | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | 147k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 160 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 2.2nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 270k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28 |
| 1 | 3.3V | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 3.3nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 4.7µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 43.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 470µF | Local:UD_10X10_ | C5 |
| 1 | 49.9k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 499k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 51k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | 53.6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 6.81k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | Barrel_Jack | Local:CUI_PJ-002B | J7 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J5 |
| 1 | DC1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | P5 |
| 1 | DC2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | P2 |
| 1 | LCD BUTTONS | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | LCD SCREEN | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | LOGO | Graphics:long | G*** |
| 1 | MPM3610GQV-P | Local:CONV_MPM3610GQV-P | U3 |
| 1 | PG | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | POLOLU 2980 | Module:Pololu_Breakout-16_15.2x20.3mm | A2 |
| 1 | POLOLU 713 | Local:SHIELD_POLOLU-713 | TB1 |
| 1 | RASPBERRY PI ZERO 2 W | Local:MODULE_RASPBERRY_PI_ZERO_2_W | U7 |
| 1 | SERVO1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | SERVO2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | STATUS LED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | D6 |
| 1 | STEPPER | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | P8 |
| 1 | STM32G0B1RET6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | TPS259474ARPWR | Local:IC_TPS25974ARPWR | U2 |
| 1 | TPS62203DBV | Package_TO_SOT_SMD:SOT-23-5 | U4 |
The 67 most common of 69 parts.
Similar boards
- 4 layers90 × 80 mm

- 2 layers40 × 40 mm

- 4 layers93.5 × 101 mm

- 4 layers125.3 × 86 mm

Project Atlas
higg22-git/Project-Atlas
Four-layer STM32G474 control board that replaced the legacy electronics on BYU Formula SAE Electric's race car. KiCad schematic, layout and manufacturing package.
124 parts - 2 layers50 × 50 mm

HolidayExpress
joshkephart/holidayExpress
esp32 project for a Lego train motor and servo control
21 parts - 4 layers56.6 × 39 mm

Multimodal Actuator mk2
TheUnknownAlias/betr_kicad_resources
This repository contains shared KiCad symbols and footprints for our projects.
91 parts - 2 layers45 × 58.2 mm

- 2 layers75.6 × 81.9 mm

AccessController
minsk-hackerspace/accessController
Control access to BIG DANGEROUS tools in hackerspace
36 parts
Questions
How big is the Cvtt pcb PCB?
It measures 66 × 88 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cvtt pcb use?
69 parts, built around the STM32G0B1RET6, MPM3610GQV-P, TPS62203DBV and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cvtt pcb KiCad files?
From the mjao1/cvtt-pcb repository on GitHub, at the commit this page was made from: the board is CVTT-PCB.kicad_pcb and its schematic CVTT-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cvtt pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask mjao1 before reusing the design.