2 layers26.4 × 23.9 mm
PWM TRANSISTOR PCB
AugustoS97/RPi-accessories
PCB de accesorios para Raspberry Pi y Arduino.
12 partsGPL-3.0
2 layers58.8 × 44.1 mm
LED RPi PCB
AugustoS97/RPi-accessoriesPCB de accesorios para Raspberry Pi y Arduino.
- Size
- 58.8 × 44.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 13
- Pads
- 58
- Tracks, vias
- 110, 81
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Jun 2022
- Updated
- 16 Jan 2023
Overview
LED RPi PCB is an open-source printed circuit board by AugustoS97, from the AugustoS97/RPi-accessories repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 58.8 × 44.1 mm with 25 parts on 13 nets, routed with 110 tracks and 81 vias.
It is built around the MP2307DN-Z and 2N2222A. Its parts include 8 connectors, 4 resistors, 3 diodes, 2 ICs and 1 transistor. It belongs with the microcontroller boards boards of this library.
Main components
2README
PWM-TRANSISTOR-PCB/README.mdPWM-TRANSISTOR-PCB
Módulo para el control PWM de cualquier elemento que trabaje con tensión igual o superior a la de alimentación.
- Corriente máxima: 600mA
- Potencia máxima: 625mW
- Pensado para controlar motores desde Raspberry y Arduino (3,3V y 5V de señal de control). Puede modificarse R1 y R2 para ser utilizado con otras tensiones de control.
- GERBER disponibles para solicitar las PCB. Si desea comprarlas ensambladas por unidades, puedes contactarme a augustosamuelhdezmartin@gmail.com
- Dimensiones de la PCB 26,7mm x 23,9 mm.
Lista de materiales (BOM)
- Transistor 2N2222A SOT-23
- Resistencia 1206 1K 0.25W
- Resistencia 1206 10K 0.25W
- Diodo 1N4007 SOD-123F
- PinHeader 2.54 2 pines x3 unidades
- Terminal Block 5.08mm
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3 |
| 2 | GND_CON | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J8 |
| 1 | 1,5A | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 12V_CON | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | 1N4007 | Diode_SMD:D_SOD-123F | D1 |
| 1 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 2N2222A | Package_TO_SOT_SMD:SOT-23W | Q1 |
| 1 | 3V3_CON | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | 5V_CON | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | DCDC_StepDown_LM2596 | EditedLib:DCDC_StepDown_LM2596 | U2 |
| 1 | FAN_CON | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J7 |
| 1 | Jumper & Switch | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LED_ON | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | MP2307 | EditedLib:MP2307 | U1 |
| 1 | RED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D2 |
| 1 | RPi_IN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | YELLOW | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D3 |
More from AugustoS97/RPi-accessories
1Similar boards
- 4 layers173.9 × 93.4 mm
Z3660 v022
shanshe/Z3660
Amiga 4000 CPU accelerator board based on A3660 and Z-turn FPGA board
198 parts78GPL-3.0 - 2 layers99.6 × 100 mm
PCB Fujitora
OPRobots/FujitoraBot
Robotracer - siguelíneas de alto rendimiento; con succión, tracción brushless en sistema tetra y procesador STM32F4
118 parts68GPL-3.0 - 2 layers39.9 × 45 mm
CanBus Radio VAG
AugustoS97/CanBus-Radio-VAG
CANBUS PCB to control original functions of VAG (VW, SKODA, SEAT, AUDI) cars (such us original DSP and other functions).
35 parts16 - 2 layers149.2 × 83.7 mm
Nodo BMS 1 1
AugustoS97/BMS-BatterySystem
Repositorio con el diseño de un BMS y una batería como TFM
117 parts7GPL-3.0 - 2 layers52.3 × 50.3 mm
- 2 layers94.9 × 40.6 mm
Esp32-c3-board bms
ieb/N2KNMEA0183Wifi
Exposes NMEA2000 and BMS data over BLE for Apps to use. Also supports Wifi/http/tcp/udp services.
43 parts2 - 4 layers88.3 × 112.3 mm
Soil metrics
Aryan-git-byte/Soil-metrics
Portable AI-powered soil monitoring device with LTE connectivity, GPS, touchscreen interface, and real-time soil health analytics.
74 parts1MIT - 2 layers169.7 × 75.2 mm
Questions
How big is the LED RPi PCB PCB?
It measures 58.8 × 44.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LED RPi PCB use?
25 parts, built around the MP2307DN-Z and 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED RPi PCB KiCad files?
From the AugustoS97/RPi-accessories repository on GitHub, at the commit this page was made from: the board is LED-RPi-PCB/LED-RPi-PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED RPi PCB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).