

ESP-01-Redesign
- Size
- 40 × 10 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 29
- Pads
- 94
- Tracks, vias
- 303, 39
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Jul 2026
- Updated
- 10 Jul 2026
Overview
ESP-01-Redesign is an open-source printed circuit board by Ashwini17p, from the Ashwini17p/ESP-01-Redesign repository on GitHub. It is a 2-layer board of 40 × 10 mm with 20 parts on 29 nets, routed with 303 tracks and 39 vias.
It is built around the ESP8266EX and W25Q32JVSSIQ. Its parts include 6 capacitors, 6 resistors, 2 ICs, 1 diode and 1 connector. It belongs with the ESP8266 boards of this library.
Main components
2ESP8266EX
QFN-32-EP(5x5)-40℃~+125℃ -91dBm 120mA 2.4GHz 2.4GHz~2.4835GHz 2.5V~3.6V 21.5dBm 50mA 72.2Mbps SPI、UART、I2C、I2S WiFi transceiver QFN-32-EP(5x5) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsW25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 12K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R6 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C8 |
| 2 | 5.6pF | Capacitor_SMD:C_0402_1005Metric | C, C6 |
| 1 | 1.5nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 2.4pF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 26mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 8.6pF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | ESP8266EX | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | Programming Header | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical | J1 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
Similar boards
- 2 layers167.8 × 167.8 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers32 × 24 mm

- 2 layers40 × 20 mm

ESP8266
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器
39 parts690MIT - 2 layers35 × 38.4 mm

Handgelenk
Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...
61 parts233 - 2 layers66.8 × 34 mm

- 2 layers37.8 × 21.5 mm

- 2 layers

Enlightened Otter
Jana-Marie/Enlightened-Otter
Enlighted-Otter is an Open-Source and OSHW work-light for hacker/maker events like the chaos communication congress, which can be screwed onto a club mate bottle.
182 parts35GPL-3.0
Questions
How big is the ESP-01-Redesign PCB?
It measures 40 × 10 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP-01-Redesign use?
20 parts, built around the ESP8266EX and W25Q32JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP-01-Redesign KiCad files?
From the Ashwini17p/ESP-01-Redesign repository on GitHub, at the commit this page was made from: the board is ESP01_redesign/ESP01_redesign.kicad_pcb and its schematic ESP01_redesign/ESP01_redesign.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP-01-Redesign design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ashwini17p before reusing the design.