
EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程

Fredon is an open-source printed circuit board by Arthur270903, from the Arthur270903/PSI3422 repository on GitHub. It is a 2-layer board with 9 parts on 62 nets, routed with 159 tracks and 12 vias.
It is built around the HC-SR04. Its parts include 5 connectors, 2 resistors and 2 ICs.
Para a compilação dos arquivos da Parte 2 use o comado g++ nome_do_arquivo.cpp -o nome_do_programa_compilado $(pkg-config --cflags --libs opencv4)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | FRDM-KL25Z | FRDM-KL25Z:FRDM-KL25Z | J1 |
| 1 | HC-SR04 | HC-SR04:XCVR_HC-SR04 | U1 |
| 1 | NRF24L01_10PIN | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | U2 |
| 1 | encoder1 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | encoder2 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |

kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程


NikolaiRadke/Noko_2
The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.

billtsol/Maze
This project demonstrates how to use an Arduino board, IR sensors, and a motor driver shield to create a maze-solving robot.

c-lydia/ESP-ROS2
A tiny robot with IMU (MPU5060) and an ultrasonic sensor (HC-SR04), running on micro-ROS, communicating over UDP.

dbrgn/crazyflie2-hcsr04
Ultrasonic sensor (HC-SR04) extension board for the Crazyflie 2.0

YousefAliAicha/aegis-embedded-system
Networked rotating ultrasonic radar system built on the Deneyap Kart 1A (ESP32-S3), with a real-time web dashboard served directly from the board.

YousefAliAicha/sentinel-arduino-firmware
Adaptive traffic-light FSM on the Arduino UNO R3 — pedestrian preemption, LDR-gated night mode with HC-SR04 vehicle detection, and a multiplexed 7-segment countdown. Fully non-blocking.
9 parts, built around the HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Arthur270903/PSI3422 repository on GitHub, at the commit this page was made from: the board is parte_01/aula_03/fredon/fredon.kicad_pcb and its schematic parte_01/aula_03/fredon/fredon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Arthur270903 before reusing the design.