2 layers42 × 42 mm
NEW PCB ADCS
niki100jad/POQUITO_ADCS
ADCS for a PocketQube mission (Warning: Still untested!)
82 parts2
2 layers28.1 × 34 mm
VibeLight
ArjunD112/VibeLightPersonal PCB Project
- Size
- 28.1 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 53
- Pads
- 169
- Tracks, vias
- 295, 53
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 Jul 2023
- Updated
- 9 Aug 2023
Overview
VibeLight is an open-source printed circuit board by ArjunD112, from the ArjunD112/VibeLight repository on GitHub. It is a 2-layer board of 28.1 × 34 mm with 42 parts on 53 nets, routed with 295 tracks and 53 vias.
It is built around the AD8603AUJ, ADXL343BCC and SPV08A0LR5H-1. Its parts include 14 capacitors, 12 resistors, 2 diodes, 2 switches and 1 connector.
Main components
3
AD8603AUJ
SOT23-5Precision Micropower, Low Noise CMOS, Rail-to-Rail Input/Output Operational AmplifierAnalog DevicesUncategorised
ADXL343BCC
LGA143-Axis, ±2g/±4g/±8g/±16g Digital MEMS AccelerometerAnalog DevicesUncategorised
SPV08A0LR5H-1
-2.3V~3.6V 200uA 64dB Omnidirectional - MEMS Microphones ROHSKnowlesMEMS Microphones
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100 nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C9, C12, C13, C14 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C6, C8, C11 |
| 4 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R13 |
| 3 | 1 uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C7, C10 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R15, R16 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2 |
| 1 | 620R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | AD8603 | Package_TO_SOT_SMD:TSOT-23-5 | OP-AMP1 |
| 1 | ADXL343 | Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | ACCEL1 |
| 1 | BL652 | RF_Module:Laird_BL652 | MCU1 |
| 1 | Conn_01x02 | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | PWR1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal | LED_OUT1 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | Intensity Dial | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LED_RBAG | RBG_LED:LED_APHB1608LZGKSURKC | D2 |
| 1 | LK112M33TR | Package_TO_SOT_SMD:SOT-23-5 | REG1 |
| 1 | OPT3002-ALS | OP3002:SON65P200X200X65-7N | LIGHT1 |
| 1 | SHT4x | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | TEMP1 |
| 1 | SPV08A0LR5H-1 | MEMS_Mic_SMD:SPV08A0LR5H-1 | MIC1 |
| 1 | Sens Dial | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV3 |
Similar boards
- 6 layers100.7 × 106.4 mm
Signal processing unit
scalinq-lab/cryomagsens
The sensor unit was designed in KiCad 10 and manufactured by JLCPCB. It is built in a flex PCB material to achieve a very small build height, in order to come very close to the device under test.
178 parts2CERN-OHL-P-2.0 - 2 layers100 × 100 mm
- 2 layers95.9 × 27.8 mm
Opsx x
ZeshuLiu/SX-70-Mk2
把板子上的U+ U- GND VCC焊到usb线上，连接电脑后可以当作树莓派Pico开发板进行操作，上传代码的参见这里（树莓派官网）。 \ 在将机身主控安装至机器内部之前需要将micropython固件及代码烧录至控制器中。后续可以通过机身控制器上的USB接口连接开发板并更新python代码。 将code根目录中的所有python文件上传至控制器（文件夹不需要），并且将gmain.py命名为…
74 parts2GPL-3.0 - 4 layers30 × 40 mm
- 4 layers34.8 × 69.6 mm
- 2 layers100 × 100 mm
Drone v2-systemboard notrace
lucaspcamargo/hydrus-v2
Second version of the Hydrus project: sw, hw, docs, etc. (RaspberryPi based)
61 parts - 2 layers90.5 × 104.4 mm
RP spectroscopy
SimoneDamian/RP_Spectroscopy_kicad
Circuits for the hardware part of the project
96 parts
Questions
How big is the VibeLight PCB?
It measures 28.1 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VibeLight use?
42 parts, built around the AD8603AUJ, ADXL343BCC and SPV08A0LR5H-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VibeLight KiCad files?
From the ArjunD112/VibeLight repository on GitHub, at the commit this page was made from: the board is VibeLight.kicad_pcb and its schematic MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VibeLight design in my own project?
Its repository states no licence, so its author keeps all rights: ask ArjunD112 before reusing the design.