
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Wall clock on ESP32 with NTP synchronization and indicator on WS2812B
Led7 2812 is an open-source printed circuit board by Anprivate, from the Anprivate/Clock_ESP32_NTP_WS repository on GitHub. It is a 2-layer board of 88 × 67 mm with 50 parts on 33 nets, routed with 458 tracks and 64 vias.
It is built around the WS2812B. Its parts include 30 diodes, 14 capacitors and 2 connectors.
Wall clock on ESP32 with NTP synchronization and indicator on WS2812B
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | WS2812B | CustomLibrary:LED_Custom_ws2812 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 14 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
The 46 most common of 50 parts.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 88 × 67 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Anprivate/Clock_ESP32_NTP_WS repository on GitHub, at the commit this page was made from: the board is board/led7_2812.kicad_pcb and its schematic board/led7_2812.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Anprivate before reusing the design.