
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Custom keyboard that will allow users to adjust and interact with different media settings on their device
MediaKeeb V1 is an open-source printed circuit board by AndrewMcGhee, from the AndrewMcGhee/Media_Keeb repository on GitHub. It is a 2-layer board of 75 × 50 mm with 18 parts on 11 nets, routed with 41 tracks and 0 vias.
It is built around the 1N4148W. Its parts include 6 diodes, 6 switches and 1 connector. It belongs with the keyboards and input boards of this library.
The 2x3 Media Keypad is a compact, custom-built keyboard designed specifically for controlling media functions on your computer. With six programmable keys arranged in a 2x3 grid, this keypad allows you to easily manage tasks like play/pause, volume control, and track navigation. This README file provides information on assembling, programming, and using your 2x3 Media Keypad.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6 |
| 6 | SW_Push_45deg | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LOGO | Pics_&_CustomParts:Logo | G*** |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly



MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle


sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

It measures 75 × 50 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AndrewMcGhee/Media_Keeb repository on GitHub, at the commit this page was made from: the board is mediaKeeb_V1/mediaKeeb_V1.kicad_pcb and its schematic Additional_Parts/KiCad-RP-Pico-main/Test/Test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AndrewMcGhee before reusing the design.