2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0
2 layers100 × 100 mm
Sensado Control DC 5
AndreSuarez/Sensor_ControlDC_PCB-5PCB para el Control DC, Sensor de Corriente
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 77
- Pads
- 300
- Tracks, vias
- 1,518, 443
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Sep 2017
- Updated
- 5 Oct 2017
Overview
Sensado Control DC 5 is an open-source printed circuit board by AndreSuarez, from the AndreSuarez/Sensor_ControlDC_PCB-5 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 112 parts on 77 nets, routed with 1,518 tracks and 443 vias.
It is built around the ATMEGA328P-AU. Its parts include 53 resistors, 18 connectors, 16 transistors, 10 capacitors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 41 | R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +25 |
| 9 | 10K | Resistors_SMD:R_0805_HandSoldering | R47, R48, R49, R50, R51, R52, R53, R54, R55 |
| 8 | NMOS | TO_SOT_Packages_THT:TO-220_Vertical | Q1, Q2, Q3, Q4, Q5, Q11, Q12, Q13 |
| 8 | PMOS | TO_SOT_Packages_THT:TO-220_Vertical | Q6, Q7, Q8, Q9, Q10, Q14, Q15, Q16 |
| 6 | 0,1uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C5, C6, C10 |
| 4 | TEST_1P | Measurement_Points:Measurement_Point_Round-TH_Small | W1, W2, W3, W4 |
| 3 | 1K | Resistors_SMD:R_0805_HandSoldering | R43, R45, R46 |
| 3 | Jumper | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1, J2, J3 |
| 3 | Led_Small_Reg | LEDs:LED_0805 | D1, D2, D3 |
| 2 | 8pF | Capacitors_SMD:C_0402 | C7, C8 |
| 1 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C9 |
| 1 | 1nF_THT | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C4 |
| 1 | ACS_712 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | Atmega328PA | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | GND_REG | Socket_Strips:Socket_Strip_Straight_1x01_Pitch2.54mm | P8 |
| 1 | GPIO | Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mm | P10 |
| 1 | I2C | Socket_Strips:Socket_Strip_Straight_2x03_Pitch2.54mm | P6 |
| 1 | I_+ | Sockets_MOLEX_KK-System:Socket_MOLEX-KK-RM3-96mm_Lock_2pin_straight | P2 |
| 1 | I_- | Sockets_MOLEX_KK-System:Socket_MOLEX-KK-RM3-96mm_Lock_2pin_straight | P3 |
| 1 | J_RESET | Socket_Strips:Socket_Strip_Straight_1x01_Pitch2.54mm | P15 |
| 1 | LD1117S50TR_FINAL | TO_SOT_Packages_SMD:SOT-223 | U3 |
| 1 | LOGO | Logos_Fuentes:CMOS | G*** |
| 1 | LOGO | Logos_Fuentes:UIS | G*** |
| 1 | LOGO | Logos_Fuentes:SBS_22mm | G*** |
| 1 | LOGO | Logos_Fuentes:Colombia | G*** |
| 1 | POWER | Sockets_MOLEX_KK-System:Socket_MOLEX-KK-RM3-96mm_Lock_2pin_straight | P4 |
| 1 | RESET | Socket_Strips:Socket_Strip_Straight_1x01_Pitch2.54mm | P9 |
| 1 | RS-232 | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | P5 |
| 1 | R_FUENTE_CON | Sockets_MOLEX_KK-System:Socket_MOLEX-KK-RM3-96mm_Lock_2pin_straight | P1 |
| 1 | SPI | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | P7 |
| 1 | TOR_1 | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | P13 |
| 1 | TOR_2 | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | P12 |
| 1 | TOR_3 | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | P14 |
| 1 | TOR_4 | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | P11 |
| 1 | XRCHA_16M | Huellas:Crystal_SMD_XRCHA_Murata_Serie_W2,5mm_L2,0mm | Y1 |
Similar boards
- 2 layers50.5 × 128.5 mm
- 2 layers152 × 88 mm
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers50.2 × 31.2 mm
MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers34 × 46 mm
- 2 layers73 × 94 mm
Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 2 layers58.9 × 44.2 mm
OpenPSX2AmigaPadAdapter
SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter
43 parts69 - 2 layers60 × 50 mm
Vx8 gps prototype v2.0
4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
56 parts66MIT
Questions
How big is the Sensado Control DC 5 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensado Control DC 5 use?
112 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensado Control DC 5 KiCad files?
From the AndreSuarez/Sensor_ControlDC_PCB-5 repository on GitHub, at the commit this page was made from: the board is Sensado_Control_DC_5/Sensado_Control_DC_5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensado Control DC 5 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AndreSuarez before reusing the design.