

Node Board
This is a pcb design for a car we made called Corsa. Corsa is made to create experiences for team to make better cars for formula student races.
- Size
- 91.5 × 82.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 52
- Pads
- 186
- Tracks, vias
- 835, 128
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Aug 2025
- Updated
- 12 Aug 2025
Overview
Node Board is an open-source printed circuit board by Altay4Alp, from the Altay4Alp/FS_Corsa_General_PCB repository on GitHub. It is a 2-layer board of 91.5 × 82.9 mm with 39 parts on 52 nets, routed with 835 tracks and 128 vias.
It is built around the TJA1051T, LM2576HVS-5 and LM1117DT-3.3, with the LTV-817S and BC848 among its other parts. Its parts include 10 resistors, 10 ICs, 3 capacitors, 3 connectors and 2 diodes.
Main components
5TJA1051T
SOIC-8-40℃~+150℃ 2.5mA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversLM2576HVS-5
TO-263-5-40℃~+125℃ 1 4V~60V 52kHz Buck Buck TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM1117DT-3.3
TO-2520℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLTV-817S
SMD-4P-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsBC848
SOT-23SOT-23 Bipolar (BJT) ROHSTDDBipolar (BJT)
README
README.mdFormula Student Corsa Node Board
This is a pcb design for a car we made called Corsa. Corsa is made to create experiences for team to make better cars for formula student races. In this pcb design it is aimed to control the car and getting datas from the car.
The board designed to use:
- 3 temprature sensor
- 2 servo motor
- 1 dc motor
- 1 gps sensor
- 1 acceleration sensor
- 1 stop light
- 1 can bus line
That list can be used as a default by just programming. But it is designed to be able to use all of the potential of STM32 blue pill. Sensors and other things can be added as wanted.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 4.7k | Resistor_SMD:R_1206_3216Metric | R4, R6, R7, R8, R9, R10, R11, R12 |
| 3 | module_mlx90614 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U7, U8, U9 |
| 2 | 100uF | Capacitor_SMD:CP_Elec_8x10 | C1, C2 |
| 2 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1, M2 |
| 2 | Screw_Terminal_01x18 | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical | J1, J2 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C10 |
| 1 | 100uH | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | 220 | Resistor_SMD:R_1206_3216Metric | R15 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric | R14 |
| 1 | BC848 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | GY-NEO6MV2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U5 |
| 1 | JQC-3FF-005-1Z | Relay_THT:Relay_SPDT_Hongfa_JQC-3FF_0XX-1Z | K2 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | LM2576HVS-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | LOGO | Footprints:logo222 | G*** |
| 1 | LTV-817S | Package_DIP:SMDIP-4_W9.53mm | U12 |
| 1 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M3 |
| 1 | Screw_Terminal_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | YAAJ_BluePill_Part_Like_SWD_Breakout | Footprints:YAAJ_BluePill_SWD_1 | U13 |
| 1 | module_bmi160 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | U10 |
The 35 most common of 39 parts.
Similar boards
- 2 layers114 × 95 mm

- 4 layers50 × 110 mm

- 2 layers53.3 × 55.1 mm

RPi Beam Profiler
jameskeaveney/RPi-Beam-Profiler
Automated laser beam profiler using Raspberry Pi
12 parts24Apache-2.0 - 2 layers109 × 95 mm

- 4 layers95 × 56 mm

Jag v1
soerenmeier/jag-board
Jag board is an attempt to make a pcb which can be used to control different kinds of rc vehicles. At first the focus will be on rc cars, which can be controlled via a web interface and a webcam.
70 parts2Apache-2.0 - 2 layers60 × 57 mm

Ariel amp
Aust1nke/Tv_Signal_amplifier_board
This project was to design a pcb used to amplify tv ariel reception for better/stronger signals
18 parts1 - 2 layers71.1 × 100.3 mm

- 2 layers118 × 84.5 mm

HoloCade Driver Shield
scifiuiguy/HoloCade_Unreal
HoloCade SDK for Unreal Engine - designed to streamline deployment of professional-grade multiplayer VR/AR/AI/Robotic LBE in venues using immersive theater actors, standardized large hydraulics for motion and haptics…
78 parts1MIT
Questions
How big is the Node Board PCB?
It measures 91.5 × 82.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Node Board use?
39 parts, built around the TJA1051T, LM2576HVS-5, LM1117DT-3.3 and LTV-817S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Node Board KiCad files?
From the Altay4Alp/FS_Corsa_General_PCB repository on GitHub, at the commit this page was made from: the board is NodeBoard/Node_Board.kicad_pcb and its schematic NodeBoard/Node_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Node Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Altay4Alp before reusing the design.