
RPi Beam Profiler
jameskeaveney/RPi-Beam-Profiler
Automated laser beam profiler using Raspberry Pi

This project was to design a pcb used to amplify tv ariel reception for better/stronger signals
Ariel amp is an open-source printed circuit board by Aust1nke, from the Aust1nke/Tv_Signal_amplifier_board repository on GitHub. It is a 2-layer board of 60 × 57 mm with 18 parts on 24 nets, routed with 119 tracks and 16 vias.
It is built around the BGA2800 and LM2576HVS-5. Its parts include 4 capacitors, 4 diodes, 2 resistors, 2 ICs and 2 connectors. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | R_US | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 1 | 1000uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 44055 | Transformer_THT:Transformer_CHK_EI42-5VA_1xSec | XMER1 |
| 1 | Antenna | RF_Antenna:NiceRF_SW868-TH13_868Mhz | AE1 |
| 1 | BFCN-152W-75 | Filter:Filter_Mini-Circuits_FV1206-7 | FL1 |
| 1 | BGA2800 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J1 |
| 1 | Conn_Coaxial | Connector_Coaxial:WR-MMCX_Wuerth_66011102111302_Horizontal | J2 |
| 1 | D | Diode_SMD:D_0201_0603Metric | D2 |
| 1 | ESD5Zxx | Diode_SMD:D_SOD-523 | D3 |
| 1 | FerriteBead | Inductor_SMD:L_Taiyo-Yuden_BK_Array_1206_3216Metric | FB1 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z6.0mm | D4 |
| 1 | LM2576HVS-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | W10G | Diode_THT:Diode_Bridge_Round_D9.8mm | D1 |

jameskeaveney/RPi-Beam-Profiler
Automated laser beam profiler using Raspberry Pi


soerenmeier/jag-board
Jag board is an attempt to make a pcb which can be used to control different kinds of rc vehicles. At first the focus will be on rc cars, which can be controlled via a web interface and a webcam.


scifiuiguy/HoloCade_Unreal
HoloCade SDK for Unreal Engine - designed to streamline deployment of professional-grade multiplayer VR/AR/AI/Robotic LBE in venues using immersive theater actors, standardized large hydraulics for motion and haptics…

AdamPrystupa/ESP32_carrier_board
ESP32 carrier board that will be included in weater station


Altay4Alp/FS_Corsa_General_PCB
This is a pcb design for a car we made called Corsa. Corsa is made to create experiences for team to make better cars for formula student races.
It measures 60 × 57 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the BGA2800 and LM2576HVS-5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Aust1nke/Tv_Signal_amplifier_board repository on GitHub, at the commit this page was made from: the board is Ariel_amp.kicad_pcb and its schematic Ariel_amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Aust1nke before reusing the design.