
Laser Arcade Project
AlexWheelock/Laser-Arcade-Project
All documentation of the Laser Arcade Project

All documentation of the Laser Arcade Project
Target is an open-source printed circuit board by AlexWheelock, from the AlexWheelock/Laser-Arcade-Project repository on GitHub. It is a 2-layer board of 76.2 × 50.8 mm with 45 parts on 52 nets, routed with 172 tracks and 3 vias.
It is built around the FT232RL. Its parts include 13 capacitors, 7 resistors, 6 connectors, 4 diodes and 2 ICs. It belongs with the PIC boards of this library.
All documentation of the Laser Arcade Project
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C7, C8, C13 |
| 4 | ~ | 0_AKeller_Footprints:1x1_100mil_Header | TP1, TP2, TP3, TP4 |
| 3 | 220uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2, C6 |
| 3 | I2C | 0_AKeller_Footprints:1x4_100mil_Header | J3, J4, J5 |
| 2 | , | ||
| 2 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R7 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 220Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 3.3kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 47pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11 |
| 1 | +5V | 0_AKeller_Footprints:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J1 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 1N4148 | 0_AKeller_Footprints:Diode_0805 | D2 |
| 1 | 2uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 4.7kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | FT232RL | 0_AKeller_Footprints:SSOP-28 | U2 |
| 1 | ICSP | 0_AKeller_Footprints:1x6_100mil_Header | J2 |
| 1 | LOGO | 2025 Logos:AKeller_Logo_0-4x0-3 | G*** |
| 1 | LOGO | 2025 Logos:RCET Stacked 1x_33 | G*** |
| 1 | LOGO | 2025 Logos:Benny _5x_5 | G*** |
| 1 | LOGO | 2025 Logos:Alex_Logo | G*** |
| 1 | PIC16F1788-IP | 0_AKeller_Footprints:SSOP-28 | U1 |
| 1 | PWR LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | RX | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | TX | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | USB_B_Mini | 0_AKeller_Footprints:USB_Micro-B_Amphenol | J6 |
The 43 most common of 45 parts.

AlexWheelock/Laser-Arcade-Project
All documentation of the Laser Arcade Project


zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube



Ledger-Donjon/silicon-toaster
SiliconToaster is an open-source hardware electromagnetic fault injection device, designed for hardware security research. It has the following features:


jsjolund/dmx512-controller-board
Controller board for DMX512 compatible devices, built around the STM32F4 processor

It measures 76.2 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the FT232RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AlexWheelock/Laser-Arcade-Project repository on GitHub, at the commit this page was made from: the board is KiCad/Target_Master/Target.kicad_pcb and its schematic KiCad/Blaster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AlexWheelock before reusing the design.