
AlimTeleinfoMySensors
tdouez/TeleinfoMySensors
Interface Téléinfo pour compteur Linky avec MySensors

Omni Trigger is an open-source printed circuit board by AlexSchmid22191, from the AlexSchmid22191/Omnitrigger_PCB repository on GitHub. It is a 2-layer board of 121.2 × 47.8 mm with 43 parts on 71 nets, routed with 186 tracks and 8 vias.
It is built around the BS170FTA. Its parts include 20 resistors, 8 connectors, 4 diodes, 4 transistors and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 +4 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 4 | BS170F | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | G5LE-1 | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K1, K2, K3, K4 |
| 2 | Conn_02x04_Odd_Even | IDC:IDC_04x02 | J4, J6 |
| 2 | Screw_Terminal_01x02 | RS_Screw:RS_Screw_Term_x2 | J1, J2 |
| 1 | Arduino_Nano_Socket | Arduino:Arduino_Nano_Socket | XA1 |
| 1 | C_Small | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J5 |
| 1 | Conn_02x13_Top_Bottom | IDC:IDC_13x02_Sided | J3 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Screw_Terminal_01x04 | RS_Screw:RS_Screw_Term_x4 | J8 |
| 1 | Screw_Terminal_01x08 | RS_Screw:RS_Screw_Term_x8 | J7 |

tdouez/TeleinfoMySensors
Interface Téléinfo pour compteur Linky avec MySensors


RepRapLtd/AnalogueNeuralNet
Project to make a photonic neural network using photochromic material for the synaptic weighting adjustments

Cosys-Lab/lab-scale-gantry-crane
Repository containing the files to create the lab-scale gantry crane used in a couple of publications.


tdouez/Linky_TEMPO
Module de récupération des sorties relais pour le compteur Linky avec un contrat TEMPO Compatible en TIC historique et standard


hprd/z80-fpga-drop-in-replacement
UT Austin Fall 2025-Spring 2026 Senior Design Project for developing a Zilog Z80 CPU drop-in replacement using an FPGA.
It measures 121.2 × 47.8 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the BS170FTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AlexSchmid22191/Omnitrigger_PCB repository on GitHub, at the commit this page was made from: the board is Omni_Trigger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AlexSchmid22191 before reusing the design.