Skip to the content
4 layers116.2 × 82.6 mmOmniplex, the printed circuit board in 3D
Size
116.2 × 82.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
89
Nets
59
Pads
270
Tracks, vias
398, 21
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
1 Feb 2022
Updated
3 Feb 2022

Overview

Omniplex is an open-source printed circuit board by AlexSchmid22191, from the AlexSchmid22191/Omniplex_PCB repository on GitHub. It is a 4-layer board of 116.2 × 82.6 mm with 89 parts on 59 nets, routed with 398 tracks and 21 vias.

It is built around the BS170FTA. Its parts include 32 resistors, 16 diodes, 16 transistors, 16 switches and 8 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

89
QtyValueFootprintReferences
16100Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32
1610kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16
16BS170FPackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16
16D_SmallDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
16TE_PCH-1xxx2MOmniplex:Relay_SPST_TE_PCN-1xxD3MHZ_ModK1, K2, K3, K4, K5, K6, K7, K8, K9, K10, K11, K12, K13, K14, K15, K16
8Conn_CoaxialConnector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_HorizontalJ1, J2, J3, J4, J5, J6, J7, J8
1Arduino_Nano_v2.xModule:Arduino_NanoA1

Similar boards

  • 2 layers21.9 × 17.1 mmAlimTeleinfoMySensors, the printed circuit board in 3D

    AlimTeleinfoMySensors

    tdouez/TeleinfoMySensors

    Interface Téléinfo pour compteur Linky avec MySensors

    14 parts14
  • 2 layers29.2 × 109.2 mmSkis, the printed circuit board in 3D

    Skis

    kraakenstuff/Skis

    The SMD, 6HP version of Bastl Skis. Includes sliders :)

    96 parts11
  • 2 layers93 × 73.5 mmOne synapse electronic, the printed circuit board in 3D

    One synapse electronic

    RepRapLtd/AnalogueNeuralNet

    Project to make a photonic neural network using photochromic material for the synaptic weighting adjustments

    141 parts8GPL-3.0
  • 2 layers68.6 × 53.3 mmGantry shield, the printed circuit board in 3D

    Gantry shield

    Cosys-Lab/lab-scale-gantry-crane

    Repository containing the files to create the lab-scale gantry crane used in a couple of publications.

    26 parts4MIT
  • 2 layers18.7 × 26 mmEsp32-wled pcb, the printed circuit board in 3D

    Esp32-wled pcb

    driemekasten/esp32-wled-pcb

    pcb for wled based on esp32-pico-d4 mcu

    19 parts3
  • 2 layers62.7 × 87.8 mmLinky TEMPO, the printed circuit board in 3D

    Linky TEMPO

    tdouez/Linky_TEMPO

    Module de récupération des sorties relais pour le compteur Linky avec un contrat TEMPO Compatible en TIC historique et standard

    34 parts3Apache-2.0
  • 10 layers17 × 50 mmSip board, the printed circuit board in 3D

    Sip board

    hprd/z80-fpga-drop-in-replacement

    UT Austin Fall 2025-Spring 2026 Senior Design Project for developing a Zilog Z80 CPU drop-in replacement using an FPGA.

    109 parts1

Questions

How big is the Omniplex PCB?

It measures 116.2 × 82.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Omniplex use?

89 parts, built around the BS170FTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Omniplex KiCad files?

From the AlexSchmid22191/Omniplex_PCB repository on GitHub, at the commit this page was made from: the board is Omniplex.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Omniplex design in my own project?

Its repository states no licence, so its author keeps all rights: ask AlexSchmid22191 before reusing the design.