Skip to the content
4 layers40 × 40 mmLittle Boy - External, the printed circuit board in 3D

Little Boy - External

Alex-C-EE/DCServo14

A platform designed to convert any brushed DC Motor to a smart continous servo

Size
40 × 40 mm
Copper layers
4
Thickness
1.6 mm
Parts
71
Nets
71
Pads
230
Tracks, vias
374, 308
Pours
77
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Oct 2024
Updated
23 Nov 2025

Overview

Little Boy - External is an open-source printed circuit board by Alex-C-EE, from the Alex-C-EE/DCServo repository on GitHub. It is a 4-layer board of 40 × 40 mm with 71 parts on 71 nets, routed with 374 tracks and 308 vias.

It is built around the TJA1051T/3/1, DRV8251DDAR-JSM and LMR33630CDDA, with the W25Q128JVSIQ, ACT1210D-101-2P-TL00 and ERJ-B1CFR10U among its other parts. Its parts include 25 capacitors, 16 connectors, 10 resistors, 6 ICs and 2 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

6

README

readme.md

DCServo

An open-source, high-performance controller for brushed DC and coreless motors.

DCServo is an open-source hardware and firmware project designed to transform common brushed DC and high-performance coreless motors into precise smart actuators. It is built for applications requiring high torque, fast response, and reliable absolute positioning.

Key Features

  • Control Performance

    • 32-bit STM32G4 Microcontroller with FPU for high-speed, floating-point control algorithms.
    • Absolute position feedback via a high-resolution, on-axis magnetic encoder.
    • High-frequency PWM and advanced control loops for smooth, precise motion.
  • Hardware

    • Support for both standard Brushed DC and high-performance Coreless motors.
    • Onboard NTC thermistor input for external motor temperature monitoring.
    • Non-volatile NOR Flash for storing configuration parameters.
    • Multi-layer PCB design for superior thermal performance and noise immunity.
  • Interfaces

    • CAN Bus: Primary command and control interface (DroneCAN target).
    • Serial: UART for configuration and debugging.
    • I/O Expansion:
      • 1x 6-pin SPI Port (JST-GH/SH)
      • 2x 2-pin General Purpose I/O (JST-GH/SH)
  • Mechanical

    • Flexible encoder architecture, supporting both direct on-axis and remote off-axis mounting.
    • Compact form factor designed for integration into custom mechanics.

Project Status

This project is under active development for the V2 hardware and firmware. The previous V1 hardware is considered a functional prototype and is not recommended for new designs. Manufacturing from this repository is not advised until the V2 designs are validated.

Platform Versions

The V2 platform will be available in two primary configurations. Development is currently focused on the Low Power version.

VersionTarget VoltageTarget CurrentStatus
Low Powerup to 36V~4A ContinuousIn Active Development
High PowerTBDTBDPlanned

Documentation

Comprehensive documentation is planned for the V2 release. In the interim, design and firmware source files can be found in the /hardware and /firmware directories, respectively.

Contributing

Contributions are welcome. Please open a GitHub Issue to report bugs or suggest features. For code or hardware changes, please submit a Pull Request.

Community & Contact

Join the discussion and get in touch:

License

  • Hardware: CERN Open Hardware License v2 (CERN-OHL-S)
  • Software: MIT License

Parts

71
QtyValueFootprintReferences
7100nFCapacitor_SMD:C_0402_1005MetricC2, C5, C6, C9, C10, C17, C25
7TESTPOINTTestPoint:TestPoint_Pad_1.5x1.5mmJ1, J2, J3, J6, J7, J12, J17
4MountingHoleMountingHole:MountingHole_2.2mm_M2H2, H3, H6, H12
2100kResistor_SMD:R_0402_1005MetricR5, R12
2100pFCapacitor_SMD:C_0402_1005MetricC26, C27
210kResistor_SMD:R_0402_1005MetricR1, R11
210uF, 50VCapacitor_SMD:C_0805_2012MetricC11, C14
222uF, 16VCapacitor_SMD:C_0805_2012MetricC19, C20
2470Resistor_SMD:R_0402_1005MetricR2, R3
2Conn_01x01TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmJ3, J6
2Control_InConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ13, J14
2LEDLED_SMD:LED_0603_1608MetricD1, D2
2Power_InConnector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_VerticalJ8, J9
2TBCCapacitor_SMD:C_0402_1005MetricC1, C3
11.5 uHInductor_SMD:L_1008_2520MetricL2
1100nF, 16VCapacitor_SMD:C_0402_1005MetricC18
1100nF, 50VCapacitor_SMD:C_0402_1005MetricC13
1100nF, X7RCapacitor_SMD:C_0402_1005MetricC12
1100uF, 80VCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC8
1120Capacitor_SMD:C_0402_1005MetricR8
11uFCapacitor_SMD:C_0402_1005MetricC4
11uF, 16V, X7RCapacitor_SMD:C_0805_2012MetricC16
11uF, X7RCapacitor_SMD:C_0805_2012MetricC21
12.2uFCapacitor_SMD:C_0603_1608MetricC22
1220nF, 50VCapacitor_SMD:C_0805_2012MetricC15
124kResistor_SMD:R_0603_1608MetricR6
125 MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
127nHInductor_SMD:L_0402_1005MetricL1
14.7uFCapacitor_SMD:C_0402_1005MetricC7
1900Resistor_SMD:R_0402_1005MetricR7
1ACT1210D-101-2P-TL00_custom:ACT1210D1012PTL00FL1
1Conn_01x06_MountingPinConnector_FFC-FPC:Hirose_FH12-6S-0.5SH_1x06-1MP_P0.50mm_HorizontalJ5
1DRV8251DDARKiCadLibrary:SOIC127P600X170-9NU7
1ERJ-B1CFR10ULibrary:ERJB1_(1020)R4
1LMR33630CDDAPackage_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm_ThermalViasU2
1MOT_AConnector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mmJ11
1MOT_BConnector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mmJ10
1Prog_INConnector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_VerticalSWD
1STM32G0B1CBTxPackage_QFP:LQFP-48_7x7mm_P0.5mmU1
1TJA1051T-3Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1TLV76733DRVxPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalViasU4
1Termination JumperJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1W25Q128JVSPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU6

The 69 most common of 71 parts.

More from Alex-C-EE/DCServo

3
  • 4 layers35.2 × 33 mmPowerServo AE 36V 3.6A 30D, the printed circuit board in 3D

    PowerServo AE 36V 3.6A 30D

    Alex-C-EE/DCServo

    A platform designed to convert any brushed DC Motor to a smart continous servo

    36 parts14
  • 4 layers39.5 × 21.6 mmAbsolute Magnetic Servo, the printed circuit board in 3D

    Absolute Magnetic Servo

    Alex-C-EE/DCServo

    A platform designed to convert any brushed DC Motor to a smart continous servo

    16 parts14
  • 4 layers19 × 21 mmLittle Boy - External - Encoder, the printed circuit board in 3D

    Little Boy - External - Encoder

    Alex-C-EE/DCServo

    A platform designed to convert any brushed DC Motor to a smart continous servo

    8 parts14

Similar boards

  • 4 layers66.9 × 66.9 mmTemp Monitor, the printed circuit board in 3D

    Temp Monitor

    Alex-C-EE/Reliable-Temp-Monitor

    A CAN Node designed to take temperature measurement from 3 analog-output sensors and control 2x 24V fans

    127 parts1
  • 2 layersPcbgolf, the printed circuit board in 3D

    Pcbgolf

    chilly23/PCBGolf-master-Comma.ai

    Compact PCB studies for the comma.ai PCBGolf challenge, including KiCad and EasyEDA designs, BOMs, STEP models, and routing-status reports.

    245 partsMIT
  • 4 layers33.9 × 42.3 mmPCBGolf, the printed circuit board in 3D

    PCBGolf

    ulyssecrn/PCBGolf

    comma.ai PCBGolf entry: 4-port CAN-FD dev board on a 35 × 43 mm, 4-layer PCBA. KiCad 10.

    253 parts
  • 6 layers80 × 50 mmDCPower, the printed circuit board in 3D

    DCPower

    Alex-C-EE/DCPower

    A compact, portable, USB-PD -> Any Voltage CC/CV power supply.

    112 parts1
  • 2 layers63 × 51.5 mmESP Gauge, the printed circuit board in 3D

    ESP Gauge

    Aperture-Shitpost-Innovators/ESPTempGauge

    ESP32 based oil temperature gauge with noise filtering, smooth movement and OTA updates.

    33 parts
  • 2 layers205 × 205 mmThree channel dc motor driver pcb, the printed circuit board in 3D

    Three channel dc motor driver pcb

    SrcnUysl/three-channel-dc-motor-driver-pcb

    KiCad-based three-channel DC motor driver and control PCB featuring STM32 interfacing and integrated power management.

    39 parts

Questions

How big is the Little Boy - External PCB?

It measures 40 × 40 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Little Boy - External use?

71 parts, built around the TJA1051T/3/1, DRV8251DDAR-JSM, LMR33630CDDA and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Little Boy - External KiCad files?

From the Alex-C-EE/DCServo repository on GitHub, at the commit this page was made from: the board is OLD/2. Little Boy - External (4.1A @ 36V)/1. Hardware/Little Boy - External.kicad_pcb and its schematic OLD/1. Little Boy (4.1A @ 36V)/1. Hardware/PowerServo AE 36V 3.6A 30D.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Little Boy - External design in my own project?

Its repository states no licence, so its author keeps all rights: ask Alex-C-EE before reusing the design.