2 layers252.7 × 137.4 mm/Ortholith.kicad_pcb.jpg?size=s&soon)
2 layers280.7 × 149.9 mm
Ortholith
Aleblazer/OrtholithLarge Ortholiniar keyboard using a Pi Pico.
- Size
- 280.7 × 149.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 220
- Nets
- 136
- Pads
- 1,015
- Tracks, vias
- 657, 246
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Jan 2023
- Updated
- 27 Jan 2023
Overview
Ortholith is an open-source printed circuit board by Aleblazer, from the Aleblazer/Ortholith repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 280.7 × 149.9 mm with 220 parts on 136 nets, routed with 657 tracks and 246 vias.
It is built around the 1N4148W. Its parts include 99 diodes, 99 switches, 1 IC and 1 connector. It belongs with the RP2040 boards of this library.
Main components
1Parts
220| Qty | Value | Footprint | References |
|---|---|---|---|
| 99 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +83 |
| 95 | 1U | foostan-parts:CherryMX_Hotswap | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +79 |
| 3 | 2U | foostan-parts:CherryMX_Hotswap | SW15-2u1, SW64-2U1, SW84-2U1 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 3U | foostan-parts:CherryMX_Hotswap | SW31-3U1 |
| 1 | OLED | Keebio-Parts:128x64OLED | J1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
The 202 most common of 220 parts.
More from Aleblazer/Ortholith
2- 2 layers280.7 × 150.1 mm
/Ortholith%20Top%20Plate.kicad_pcb.jpg?size=s&soon)
Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
Questions
How big is the Ortholith PCB?
It measures 280.7 × 149.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ortholith use?
220 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ortholith KiCad files?
From the Aleblazer/Ortholith repository on GitHub, at the commit this page was made from: the board is Ortholith v03 (Intellikeys usb layout)/Ortholith.kicad_pcb and its schematic Ortholith v02 (Choc Solder)/Ortholith.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ortholith design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).