

Layer1
eighty seventy-six's RCJ Soccer 2023 Team Repository
- Size
- 178 × 167.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 109
- Nets
- 92
- Pads
- 324
- Tracks, vias
- 609, 131
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Aug 2022
- Updated
- 17 Apr 2023
Overview
Layer1 is an open-source printed circuit board by 8076ducc, from the 8076ducc/robocup-2023 repository on GitHub. It is a 2-layer board of 178 × 167.5 mm with 109 parts on 92 nets, routed with 609 tracks and 131 vias.
It is built around the STM32F103C8T6 and CD74HC4067SM96. Its parts include 45 resistors, 35 diodes, 11 capacitors, 7 connectors and 3 ICs. It belongs with the STM32 boards of this library.
Main components
2STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)CD74HC4067SM96
SSOP-24-208mil-55℃~+125℃ 15ns 16 16:1 2V~6V 5pF 70Ω 89MHz SSOP-24-208mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
Parts
109| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | ALS-PT19-315C | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +16 |
| 32 | LED | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R35, R37, R38, R41, R42, R44 |
| 5 | 1μF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C6, C7 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R39, R40, R43 |
| 2 | 0.1μF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 1pF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 30Ω/1.8A | Capacitor_SMD:C_0603_1608Metric | FB1, FB2 |
| 2 | 3k | Resistor_SMD:R_0603_1608Metric | R34, R36 |
| 2 | CD74HC4067SM | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U2, U3 |
| 2 | Conn_01x02_Female | Connector_AMASS:AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | J4, SOLENOID1 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 2 | SW_DPDT_x2 | Switches:SWITCH_SPDT_PTH_11.6X4.0MM_LOCK | SW1, SW2 |
| 1 | 1000µF/63V | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C10 |
| 1 | 1500pF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 1N4728 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D34 |
| 1 | 1N5401 | Diode_THT:D_DO-27_P15.24mm_Horizontal | D35 |
| 1 | 20 | Resistor_SMD:R_0603_1608Metric | R45 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | BLUE | Diode_SMD:D_0603_1608Metric | D33 |
| 1 | Crystal | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | MOSFET-NCH-AO3404A | Package_TO_SOT_SMD:TSOT-23 | Q2 |
| 1 | MOSFET-NCH-FQP30N06L | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | SH1.0 5P | Connector_JST:JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical | J2 |
| 1 | SH1.0 Female | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J1 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW3 |
More from 8076ducc/robocup-2023
3Similar boards
- 2 layers309.6 × 95.3 mm

Macrolev
heiso/macrolev
Macrolev is an open source analog keyboard powered by Hall Effect switches
184 parts136 - 2 layers204 × 174.9 mm

- 4 layers65 × 100 mm

- 4 layers344 × 117.5 mm

- 2 layers229 × 96 mm

Oscillator Board
Bad-Dog-Designs/ESP32-S3-Synthesizer
Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine
138 parts19 - 4 layers29.3 × 187.1 mm

Left Frame
FlightDeckDIY/G1000-NXi-Mega
Welcome to the G1000 NXi Mega project! This repository contains the schematic and PCB design files for a custom-built G1000 avionics panel, designed specifically for use with flight simulators like Microsoft Flight…
127 parts14 - 2 layers391.2 × 166.5 mm

Takt11800
vuckale/takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA
284 parts12CERN-OHL-S-2.0 - 2 layers100 × 55 mm

PCBTriatlonWAY
Alejojoa/Triatlon-Alita
Repositorio dedicado al desarollo de un robot triatlon.
43 parts6
Questions
How big is the Layer1 PCB?
It measures 178 × 167.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Layer1 use?
109 parts, built around the STM32F103C8T6 and CD74HC4067SM96. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Layer1 KiCad files?
From the 8076ducc/robocup-2023 repository on GitHub, at the commit this page was made from: the board is electrical design/layer1/layer1.kicad_pcb and its schematic electrical design/driver/driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Layer1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask 8076ducc before reusing the design.

