

Layer1
ducc.'s RCJ Soccer 2026 Team Repository
- Size
- 178 × 167.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 212
- Nets
- 119
- Pads
- 467
- Tracks, vias
- 632, 275
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Jun 2025
- Updated
- 20 Apr 2026
Overview
Layer1 is an open-source printed circuit board by 8076ducc, from the 8076ducc/robocup-2026 repository on GitHub. It is a 2-layer board of 178 × 167.8 mm with 212 parts on 119 nets, routed with 632 tracks and 275 vias.
It is built around the CD74HC4067SM96. Its parts include 41 resistors, 36 capacitors, 32 diodes, 32 inductors and 5 connectors.
Main components
1README
README.mdducc. Robotics: RoboCupJunior Soccer 2026
This repository contains ducc's working files and source code for the 2025 RoboCupJunior Soccer Open and Soccer Lightweight competition.
About
ducc is a four-man team comprising Neo Hao Jun, Neo Jun Hao, Tan Kian Wu and Yeo Zizeng Justin from the Hwa Chong Robotics Club in Singapore.
Technologies
This project was built with the following tools:
- Mechanical: Autodesk Fusion
- Electrical: KiCad 9.0
- Programming: PlatformIO
Intellectual Property
Copyright
© 2026, ducc. Robotics Competition Team.
While we have made every effort to abide by legal and ethical requirements when using works that we did not create, some may have been overlooked inadvertently. Please let us know and we will be happy to make the necessary arrangements.
Parts
212| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 10R | Ducc 2026:res0603 | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +16 |
| 32 | 10µH | Inductor_SMD:L_0805_2012Metric | L1, L2, L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L20, L21, L22, L23 +16 |
| 32 | 1uF | Ducc 2026:cap0603 | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +16 |
| 32 | ALS-PT19-315C | Diode_SMD:D_0603_1608Metric | LDR1, LDR2, LDR10, LDR11, LDR12, LDR13, LDR14, LDR15, LDR16, LDR17, LDR18, LDR19, LDR20, LDR21, LDR22, LDR23 +16 |
| 32 | WHITE 2835 | Ducc 2026:LED_PLCC_2835 | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +16 |
| 24 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H23, H24, H25 +8 |
| 3 | 10k | Ducc 2026:res0603 | R34, R37, R39 |
| 3 | 3k | Ducc 2026:res0603 | R33, R36, R38 |
| 2 | 0.1μF | Ducc 2026:cap0603 | C35, C36 |
| 2 | 1k | Ducc 2026:res0603 | R35, R40 |
| 2 | CD74HC4067SM | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U1, U2 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 2 | MountingHole | Ducc 2026:ducc logo copper negative | H21, H22 |
| 2 | TestPoint_2Pole | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP2, TP3 |
| 1 | +3V3 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | BUCK1 |
| 1 | 10uF | Ducc 2026:cap0603 | C34 |
| 1 | 180R | Ducc 2026:res0603 | R41 |
| 1 | 22uF | Ducc 2026:cap0603 | C33 |
| 1 | Conn_01x02 | Ducc 2026:AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | J3 |
| 1 | Conn_01x04 | Ducc 2026:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J5 |
| 1 | Conn_01x06 | Ducc 2026:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J4 |
| 1 | SW_SPDT | Ducc 2026:Switch SPDT | SW1 |
| 1 | SW_SPDT_312 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW2 |
| 1 | ~ | Ducc 2026:MURATA_OKL-T-6-W12P-C_0 | U4 |
More from 8076ducc/robocup-2026
7- 2 layers178 × 167.8 mm

- 2 layers113.1 × 137.5 mm

- 2 layers178 × 167.8 mm

- 2 layers

- 2 layers92.6 × 62.4 mm

- 2 layers8.5 × 12.3 mm

- 2 layers8.5 × 12.3 mm

Similar boards
- 2 layers309.6 × 95.3 mm

Macrolev
heiso/macrolev
Macrolev is an open source analog keyboard powered by Hall Effect switches
184 parts136 - 2 layers204 × 174.9 mm

- 4 layers65 × 100 mm

- 4 layers344 × 117.5 mm

- 2 layers229 × 96 mm

Oscillator Board
Bad-Dog-Designs/ESP32-S3-Synthesizer
Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine
138 parts19 - 4 layers29.3 × 187.1 mm

Left Frame
FlightDeckDIY/G1000-NXi-Mega
Welcome to the G1000 NXi Mega project! This repository contains the schematic and PCB design files for a custom-built G1000 avionics panel, designed specifically for use with flight simulators like Microsoft Flight…
127 parts14 - 2 layers391.2 × 166.5 mm

Takt11800
vuckale/takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA
284 parts12CERN-OHL-S-2.0 - 2 layers100 × 55 mm

PCBTriatlonWAY
Alejojoa/Triatlon-Alita
Repositorio dedicado al desarollo de un robot triatlon.
43 parts6
Questions
How big is the Layer1 PCB?
It measures 178 × 167.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Layer1 use?
212 parts, built around the CD74HC4067SM96. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Layer1 KiCad files?
From the 8076ducc/robocup-2026 repository on GitHub, at the commit this page was made from: the board is open/electrical design/layer1 Teensy/layer1.kicad_pcb and its schematic lightweight/electrical design/layer1/layer1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Layer1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask 8076ducc before reusing the design.