

Layer3
eighty seventy-six's RCJ Soccer 2023 Team Repository
- Size
- 126.4 × 78.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 129
- Pads
- 340
- Tracks, vias
- 577, 98
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Aug 2022
- Updated
- 17 Apr 2023
Overview
Layer3 is an open-source printed circuit board by 8076ducc, from the 8076ducc/robocup-2023 repository on GitHub. It is a 2-layer board of 126.4 × 78.4 mm with 61 parts on 129 nets, routed with 577 tracks and 98 vias.
It is built around the STM32F103C8T6, 74LVC2G04DW and XT30UPB-F, with the XT60PW-M among its other parts. Its parts include 14 connectors, 12 capacitors, 10 resistors, 5 ICs and 4 switches. It belongs with the STM32 boards of this library.
Main components
4STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)74LVC2G04DW
SOT-363-40℃~+125℃ 1.65V~5.5V 1.7V~2V 10uA 2 2 3.8ns@5V,50pF 32mA 32mA 700mV~800mV 74LVC SOT-363 Inverters ROHSDiodes IncorporatedGates And InvertersXT30UPB-F
--、Aviation model plug 0.65mΩ 15A DC 500V Female Gold Plated PA Yellow - Power connector / plug connector ROHSAMASSPlugXT60PW-M
-Horizontal plug Yellow - Power connector / plug connector ROHSChangzhou Amass ElecPlug
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1μF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C7, C8, C9, C10 |
| 7 | XT30UPB-F | Connector_AMASS:AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | DRIBBLERJ1, J3, J4, J5, J6, J7, J18 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6, R7, R10 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R5, R8, R9 |
| 4 | 1pF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C11, C12 |
| 2 | 74LVC2G04 | Package_TO_SOT_SMD:SOT-23-6 | U4, U5 |
| 2 | BLUE | Diode_SMD:D_0603_1608Metric | D1, D2 |
| 2 | Conn_01x01_Female | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J19, J20 |
| 2 | Crystal | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1, Y2 |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | SH1.0 Female | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J10, J11 |
| 2 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2, U3 |
| 2 | SW_DPDT_x2 | Switches:SWITCH_SPDT_PTH_11.6X4.0MM_LOCK | SW1, SW3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2, SW4 |
| 2 | XT60PW-M | XT60PW-M:AMASS_XT60PW-M | J1, J2 |
| 1 | +3V3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | BUCK2 |
| 1 | +5V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | BUCK1 |
| 1 | CAMERA | Connector_JST:JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J16 |
| 1 | COMPASS | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | DRIBBLERJ2 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | BT1 |
| 1 | MOTOR1 | Connector_JST:JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical | J12 |
| 1 | MOTOR2 | Connector_JST:JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical | J13 |
| 1 | MOTOR3 | Connector_JST:JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical | J14 |
| 1 | MOTOR4 | Connector_JST:JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical | J15 |
| 1 | SH1.0 3P | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J17 |
| 1 | SH1.0 5P | Connector_JST:JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical | J9 |
| 1 | TEENSY 4.0 | teensy:Teensy40 | U1 |
| 1 | XH2.54 5P | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | LIDAR1 |
More from 8076ducc/robocup-2023
3Similar boards
- 2 layers188.9 × 115 mm

- 2 layers159.9 × 99.9 mm

- 4 layers70 × 50 mm

Mjpower ss
mjbots/power_dist
This repository contains hardware and firmware for the mjbots powerdist and mjpower-ss boards. Both provide pre-charge, over-current limiting and connector fanout.
35 parts15Apache-2.0 - 2 layers184.8 × 128.4 mm

- 2 layers80 × 100 mm

- 2 layers80 × 80 mm

CoRoSoN Package Draft
ItzJannis/CoRoSoN-Package_Draft
Draft version to the official CoRoSoN-Kit.
56 parts1GPL-3.0 - 2 layers18 × 52 mm

Xt30-distribution
vsreality/power-distribution-board-xt30
Power distribution board with XT30 connectors
7 parts - 2 layers70 × 70 mm

Questions
How big is the Layer3 PCB?
It measures 126.4 × 78.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Layer3 use?
61 parts, built around the STM32F103C8T6, 74LVC2G04DW, XT30UPB-F and XT60PW-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Layer3 KiCad files?
From the 8076ducc/robocup-2023 repository on GitHub, at the commit this page was made from: the board is electrical design/layer3/layer3.kicad_pcb and its schematic electrical design/driver/driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Layer3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask 8076ducc before reusing the design.

