Skip to the content
2 layers18 × 52 mmXt30-distribution, the printed circuit board in 3D

Power distribution board with XT30 connectors

Size
18 × 52 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
2
Pads
12
Tracks, vias
0, 0
Pours
6
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
11 Oct 2026
Updated
11 Oct 2026

Overview

Xt30-distribution is an open-source printed circuit board by vsreality, from the vsreality/power-distribution-board-xt30 repository on GitHub. It is a 2-layer board of 18 × 52 mm with 7 parts on 2 nets.

It is built around the XT30UPB-M and XT30UPB-F.

Main components

2

README

README.md

PD-XT30-5 v1.0

VSReality Robotics five-port XT30 power distribution board. All five ports share a passive parallel bus; the intended arrangement is one supply and four loads.

Board

  • 18 x 52 mm, 1.6 mm FR4, two copper layers with 70 um (2 oz) copper per side.
  • Two 3.2 mm non-plated M3 mounting holes, 42 mm centre-to-centre.
  • Five centred XT30UPB connectors, spaced 7 mm apart and numbered 1-5.
  • Port 1: XT30UPB-F; ports 2-5: XT30UPB-M. Confirm connector gender against the intended harness.
  • Positive copper occupies the left strip when viewed from the front. Ground fills the remaining available area on both layers; mounting keepouts remain copper-free.
  • Branding, model name and v1.0 are printed on the back.
FrontBack
FrontBack

Angled 3D view

Files

Open xt30-distribution.kicad_pro in KiCad 9. The PCB, schematic and project-relative connector STEP models are included.

  • production/: Gerbers, separate PTH/NPTH drills, IPC-D-356 netlist, fabrication instructions and SHA-256 manifest.
  • PD-XT30-5-v1.0-Production.zip: verified bare-board manufacturing package.
  • fabrication/: matching fabrication files and drill maps.
  • DESIGN-NOTES.txt: mechanical, electrical and fabrication details.
  • drc-report.txt, erc-report.txt, production-verification.txt: validation results.
  • models/MODEL-SOURCES.txt: third-party model provenance; no additional license is asserted for those models.

Design notes: DRC/ERC checks pass. Current rating and thermal performance have not been validated. No onboard fusing or reverse-polarity protection.

See DESIGN-NOTES.txt for detailed validation and rebuild instructions.

Parts

7
QtyValueFootprintReferences
4XT30UPB-MConnector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_VerticalJ2, J3, J4, J5
2M3 / 3.2mmMountingHole:MountingHole_3.2mm_M3H1, H2
1XT30UPB-FConnector_AMASS:AMASS_XT30UPB-F_1x02_P5.0mm_VerticalJ1

Similar boards

  • 4 layers70 × 50 mmMjpower ss, the printed circuit board in 3D

    Mjpower ss

    mjbots/power_dist

    This repository contains hardware and firmware for the mjbots powerdist and mjpower-ss boards. Both provide pre-charge, over-current limiting and connector fanout.

    35 parts15Apache-2.0
  • 2 layers184.8 × 128.4 mmBottomPCB, the printed circuit board in 3D

    BottomPCB

    Bohlebots-Sarcat/sarcat-bottom-pcb

    53 parts1
  • 2 layers80 × 100 mmMain v02, the printed circuit board in 3D

    Main v02

    bohlebots/soccer

    open source files of the teams www.bohlebots.de

    79 parts1
  • 2 layers80 × 80 mmCoRoSoN Package Draft, the printed circuit board in 3D

    CoRoSoN Package Draft

    ItzJannis/CoRoSoN-Package_Draft

    Draft version to the official CoRoSoN-Kit.

    56 parts1GPL-3.0
  • 2 layers208 × 198.1 mmLayer2, the printed circuit board in 3D

    Layer2

    8076ducc/robocup-2025

    ducc.'s RCJ Soccer 2025 Team Repository

    50 parts4
  • 2 layers70 × 70 mm18350 holder, the printed circuit board in 3D

    18350 holder

    MTalon63/PCBs

    Misc. PCB designs

    11 parts2
  • 2 layers126.4 × 78.4 mmLayer3, the printed circuit board in 3D

    Layer3

    8076ducc/robocup-2023

    eighty seventy-six's RCJ Soccer 2023 Team Repository

    61 parts1
  • 2 layers178 × 167.8 mmLayer2, the printed circuit board in 3D

    Layer2

    8076ducc/robocup-2026

    ducc.'s RCJ Soccer 2026 Team Repository

    51 parts

Questions

How big is the Xt30-distribution PCB?

It measures 18 × 52 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Xt30-distribution use?

7 parts, built around the XT30UPB-M and XT30UPB-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Xt30-distribution KiCad files?

From the vsreality/power-distribution-board-xt30 repository on GitHub, at the commit this page was made from: the board is xt30-distribution.kicad_pcb and its schematic xt30-distribution.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Xt30-distribution design in my own project?

Its repository states no licence, so its author keeps all rights: ask vsreality before reusing the design.