2 layers132.9 × 130 mm
TouchBoard
8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC
292 partsGPL-3.0
2 layers80 × 80 mm
FaderBoard
8-Lambda-8/ShowControllPCBsA collection of PCBs for controlling other show hardware via MIDI or OSC
- Size
- 80 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 35
- Pads
- 132
- Tracks, vias
- 151, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jan 2024
- Updated
- 19 Jun 2026
Overview
FaderBoard is an open-source printed circuit board by 8-Lambda-8, from the 8-Lambda-8/ShowControllPCBs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 80 mm with 28 parts on 35 nets, routed with 151 tracks and 22 vias.
It is built around the ADS1115IDGS. Its parts include 5 capacitors, 4 connectors and 1 IC. It belongs with the audio and music boards of this library.
Main components
1README
README.mdA collection of PCBs with faders, buttons, encoders (and so on ...) for usage in an MIDI or OSC controller
Interactive BOMs:
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5 |
| 4 | MountingHole:MountingHole_3.2mm_M3 | , , , | |
| 4 | Fader_B10k | Library:Fader B10K | RV1, RV2, RV3, RV4 |
| 2 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J1, J1 |
| 2 | Conn_01x14_Socket | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J2, J2 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U1 |
Questions
How big is the FaderBoard PCB?
It measures 80 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FaderBoard use?
28 parts, built around the ADS1115IDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FaderBoard KiCad files?
From the 8-Lambda-8/ShowControllPCBs repository on GitHub, at the commit this page was made from: the board is faderBoard/faderBoard.kicad_pcb and its schematic CAT_XLR/CAT_XLR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FaderBoard design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from 8-Lambda-8/ShowControllPCBs
7- 2 layers80 × 80 mm
ButtonMatrixBoard panelized
8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC
104 partsGPL-3.0 - 2 layers94 × 120 mm
CAT XLR pannel
8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC
92 partsGPL-3.0 - 2 layers100 × 40 mm
DJ Mixer
8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC
58 partsGPL-3.0 - 2 layers80 × 40 mm
ButtonMatrixBoard
8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC
52 partsGPL-3.0 - 2 layers46 × 120 mm
CAT XLR
8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC
26 partsGPL-3.0 - 2 layers42 × 100 mm
MotorFaderBoard
8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC
17 partsGPL-3.0
Similar boards
- 4 layers70 × 43 mm
USMU v10
joeltroughton/uSMU
Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware
137 parts187 - 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers192.1 × 126.9 mm
Stradex1
Bylin-code/Stradex1
STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…
24 parts101 - 4 layers100 × 49.8 mm
- 2 layers96 × 74.4 mm
Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 2 layers140.7 × 86.5 mm
- 4 layers20 × 30 mm
NanoAmmeter v2
joeltroughton/nanoAmmeter
A small ammeter for measuring printed glucose biosensors
35 parts29