
TouchBoard
8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC

A collection of PCBs for controlling other show hardware via MIDI or OSC
CAT XLR pannel is an open-source printed circuit board by 8-Lambda-8, from the 8-Lambda-8/ShowControllPCBs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 94 × 120 mm with 92 parts on 50 nets, routed with 126 tracks and 20 vias.
It belongs with the audio and music boards of this library.
A collection of PCBs with faders, buttons, encoders (and so on ...) for usage in an MIDI or OSC controller
Interactive BOMs:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 56 | NPTH | NPTH | KiKit_MB_1_1, KiKit_MB_1_2, KiKit_MB_1_3, KiKit_MB_1_4, KiKit_MB_1_5, KiKit_MB_1_6, KiKit_MB_1_7, KiKit_MB_2_1, KiKit_MB_2_2, KiKit_MB_2_3, KiKit_MB_2_4, KiKit_MB_2_5, KiKit_MB_2_6, KiKit_MB_2_7, KiKit_MB_3_1, KiKit_MB_3_2 +40 |
| 18 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | , , , , , , , , , , , , , , , +2 |
| 8 | XLR5 | XLR_3+5:Jack_XLR_Neutrik_NC3+5FAH2-0_Horizontal | J1, J1, J2, J2, J3, J3, J4, J4 |
| 8 | XLR5 | XLR_3+5:Jack_XLR_Neutrik_NC3+5MAH_Horizontal | J5, J5, J6, J6, J7, J7, J8, J8 |
| 2 | 8P8C_Shielded | Connector_RJ:RJ45_Ninigi_GE | J0, J0 |

8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC

8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC

8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC

8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC

8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC

8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC

8-Lambda-8/ShowControllPCBs
A collection of PCBs for controlling other show hardware via MIDI or OSC

cardonabits/haxo-hw
Haxophone, an electronic musical instrument that resembles a saxophone

Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc

ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT



cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
It measures 94 × 120 mm and has 2 copper layers, 1.6 mm thick.
92 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 8-Lambda-8/ShowControllPCBs repository on GitHub, at the commit this page was made from: the board is CAT_XLR/CAT_XLR_pannel.kicad_pcb and its schematic CAT_XLR/CAT_XLR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).