

MDhub
- Size
- 89.2 × 52.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 69
- Pads
- 251
- Tracks, vias
- 500, 96
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jun 2025
- Updated
- 18 Feb 2026
Overview
MDhub is an open-source printed circuit board by 22060, from the 22060/2025 repository on GitHub. It is a 2-layer board of 89.2 × 52.1 mm with 66 parts on 69 nets, routed with 500 tracks and 96 vias.
It is built around the BU33TD3WG-TR and WS2812B. Its parts include 25 connectors, 11 capacitors, 10 resistors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
2BU33TD3WG-TR
SSOP-5-40℃~+85℃ 1 200mA 220mV@(200mA) 3.3V 35uA 6V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SSOP-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSROHM SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdgit clone https://github.com/22060/2025 --recursive
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x05_Pin | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J3, J4, J5, J6, J17, J18, J21, J22, J25 |
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C9, C10, C11 |
| 4 | Conn_01x02_Pin | Connector_Hirose:Hirose_DF13-02P-1.25DS_1x02_P1.25mm_Horizontal | J14, J15, J23, J24 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 3 | Conn_01x04_Pin | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2, J9, J10 |
| 3 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1, SW2, SW3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 165 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J7, J8 |
| 2 | Conn_01x02_Pin | jisaku:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal+3D | J11, J19 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J12, J20 |
| 2 | Conn_01x04_Pin | Connector_Hirose:Hirose_DF13-04P-1.25DSA_1x04_P1.25mm_Vertical | J13, J16 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1, LED2 |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | SOP-J8 | footprints2:SOP-J8 | U1, U3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | BOOT1, RESET1 |
| 2 | fuse | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R10 |
| 1 | 1.5kΩ 100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 10u(DFP | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | BU33TD3WG | footprints:SSOP5 | DCDC1 |
| 1 | IQXO-70 | Oscillator:Oscillator_SMD_IQD_IQXO70-4Pin_7.5x5.0mm | X1 |
| 1 | LOGO | _gazou:core | G*** |
| 1 | LOGO | _gazou:full | G*** |
| 1 | STM32H523CCTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | jisaku:USB_C_Receptacle_aitendo | J1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
More from 22060/2025
7- 4 layers49.5 × 49.5 mm

- 4 layers49.3 × 49.9 mm

- 2 layers60.6 × 31.8 mm

- 4 layers49.3 × 49.9 mm

- 2 layers91.9 × 47.2 mm

- 2 layers68.6 × 33 mm

- 2 layers52.1 × 71.1 mm

Similar boards
- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers26 × 30 mm

Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm

- 2 layers95.3 × 161.9 mm

- 2 layers42.8 × 28.8 mm

MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm

- 2 layers285.5 × 95 mm

- 2 layers177.7 × 144.5 mm

Questions
How big is the MDhub PCB?
It measures 89.2 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MDhub use?
66 parts, built around the BU33TD3WG-TR and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MDhub KiCad files?
From the 22060/2025 repository on GitHub, at the commit this page was made from: the board is kicad/MDhub/MDhub.kicad_pcb and its schematic kicad/EDzissen/EDzissen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MDhub design in my own project?
Its repository states no licence, so its author keeps all rights: ask 22060 before reusing the design.