Skip to the content
12

1N4728A

XCHExtended

Part id
xch/1N4728A
Category
Uncategorised
Package
DO-41
Pins
2
In stock
1,940 at JLCPCB (C7441074)
Used on
8 open-source boards

Overview

The 1N4728A is an uncategorised made by XCH in a DO-41 package with 2 pins.

PCBKit's library has its KiCad symbol (Diode:1N47xxA, from KiCad's library) and its footprint (Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal, from KiCad's library), ready for a KiCad board. 1,940 are in stock at JLCPCB (part C7441074). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

Diode:1N47xxAFrom KiCad's library

Footprint

12
Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalFrom KiCad's library

Pinout

2
The pins of the 1N4728A
PinNameType
1KPassive
2APassive

Open-source boards using it

8
  • 2 layers99 × 90 mmExtron input, the printed circuit board in 3D

    Extron input

    rattboi/extron-scart-adapter

    Cheap adapter for (some) extron matrix switchers to allow SCART input with no cables

    22 parts37
  • 2 layers160 × 200 mmRetro programmer, the printed circuit board in 3D

    Retro programmer

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    209 parts15
  • 2 layers108 × 122 mmMyolo, the printed circuit board in 3D

    Myolo

    nico-entz/MyoloV2

    A simple muon/particle detector based on STM32 (BluePill), Scintillators and MicroFC SiPMS

    67 parts8MIT
  • 2 layers210 × 125 mmController bldc, the printed circuit board in 3D

    Controller bldc

    david8128/Electeam-Sharky

    Firmware designed in ESP32 DEVKIT microcontroller where motor, throttle, breaks, Nextion touch screen and more systems are integrated.

    73 parts2GPL-3.0
  • 4 layers284.2 × 102.8 mmFred v3, the printed circuit board in 3D

    Fred v3

    AMR-Frederico/Fred_PCB

    PCB para o Fred

    243 parts1MIT
  • 2 layers110 × 84 mmPKE, the printed circuit board in 3D

    PKE

    neriyashalom/PKE-Car-System

    Final project - ESP32-S3 based PKE system for vehicle access and ignition

    90 parts1
  • 2 layers65 × 76 mmSensor Indicator, the printed circuit board in 3D

    Sensor Indicator

    finnmo/IoT-Water-Tank-Level-Monitor

    A low-cost IoT water level monitoring device designed to provide visual status indication and remote telemetry for tanks, pits, and other liquid storage applications.

    23 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 1N4728A?

Yes. The symbol is Diode:1N47xxA and the footprint Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 1N4728A?

DO-41, with 2 pins. Its footprint is drawn on this page.

Where is the 1N4728A datasheet?

XCH publishes it: the Datasheet link on this page opens it.

Where can I order the 1N4728A?

JLCPCB lists it as part C7441074, with 1,940 in stock; the sellers' links on this page open their listings.

What can replace the 1N4728A?

Parts like it in the library: the 1SMA4728A SMA by XCH, the SMBJ5333B by LGE, the SMA2Z3.3A by XCH and the SMB3Z3.3A by XCH. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 1N4728A?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.