
CH341A Pro
Upcycle-Electronics/CH341A-Pro
Retrace pics and schematic for the Cheap Black CH341A Serial Flash EEPROM BIOS Programmer
WCH (Nanjing Qinheng Microelectronics)Extended
120uA 12mA 2Mbps 3.3V、5V USB 2.0 USB to UART、USB to SPI、USB to I2C、USB to printer、USB to parallel port SOP-28-300mil USB Converters ROHS
The CH341A is a USB Converter made by WCH (Nanjing Qinheng Microelectronics) in a SOP-28-300mil package with 28 pins. 120uA 12mA 2Mbps 3.3V、5V USB 2.0 USB to UART、USB to SPI、USB to I2C、USB to printer、USB to parallel port SOP-28-300mil USB Converters ROHS.
PCBKit's library has its KiCad symbol (Interface_USB:CH341A, from KiCad's library) and its footprint (Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 345 are in stock at JLCPCB (part C13517). 12 open-source boards in 10 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | ACT | Output |
| 2 | RSTI | Passive |
| 3 | IN7/SIN/AS | Tri-state |
| 4 | ROV/AFD/DS | Tri-state |
| 5 | TXD/ERR | Input/output |
| 6 | RXD/PEMP | Input |
| 7 | INT/ACK | Passive |
| 8 | IN3/SLCT | Passive |
| 9 | V3 | Passive |
| 10 | UD+ | Input/output |
| 11 | UD- | Input/output |
| 12 | GND | Power in |
| 13 | XI | Input |
| 14 | XO | Output |
| 15 | CTS/D0 | Tri-state |
| 16 | DSR/D1 | Tri-state |
| 17 | RI/D2 | Tri-state |
| 18 | DCD/D3 | Tri-state |
| 19 | OUT/D4 | Tri-state |
| 20 | DTR/D5 | Tri-state |
| 21 | RTS/D6 | Tri-state |
| 22 | SLP/D7 | Tri-state |
| 23 | SDA | Input/output |
| 24 | SCL | Open collector |
| 25 | RDY/STB/WR | Output |
| 26 | TNOW/INI/RST | Output |
| 27 | TEN/BUSY/WT | Passive |
| 28 | VCC | Power in |

Upcycle-Electronics/CH341A-Pro
Retrace pics and schematic for the Cheap Black CH341A Serial Flash EEPROM BIOS Programmer

AliceAch/SPIN-FV1-Tone-Dev
A PCB Tone Development board for Guitar Effects, built around the SPIN FV1 DSP IC.

Omarbelh/FlashCore
Hybrid USB-C SPI Flash & EEPROM programmer based on CH341A and ESP32-S3.

ADBeta/CH341A_USB_C
USB-C CH341A Breakout Board with EEPROM, I2C, SPI and UART Outputs - with headers for SOIC Clips

CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.


CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

Yes. The symbol is Interface_USB:CH341A and the footprint Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOP-28-300mil, with 28 pins. Its footprint is drawn on this page.
WCH (Nanjing Qinheng Microelectronics) publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C13517, with 345 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the CH376S by WCH (Nanjing Qinheng Microelectronics), the CH375B by WCH (Nanjing Qinheng Microelectronics), the CH341B by WCH (Nanjing Qinheng Microelectronics) and the CH340S by WCH (Nanjing Qinheng Microelectronics). Check their datasheets: a part that fits the footprint may still differ in its ratings.
12 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.