Skip to the content
12

TSAL6100

Vishay IntertechnologyExtended

-40℃~+85℃ 1.35V、2.2V 100mA 10° 160mW 30nm 5V 80mW/sr@IF=100mA 940nm 插件,D=5mm Infrared LED Emitters ROHS

Part id
vishay/TSAL6100
Category
Infrared LED Emitters
Package
插件,D=5mm
Pins
2
In stock
5,758 at JLCPCB (C111836)
Used on
8 open-source boards

Overview

The TSAL6100 is an infrared LED Emitter made by Vishay Intertechnology in a 插件,D=5mm package with 2 pins. -40℃~+85℃ 1.35V、2.2V 100mA 10° 160mW 30nm 5V 80mW/sr@IF=100mA 940nm 插件,D=5mm Infrared LED Emitters ROHS.

PCBKit's library has its KiCad symbol (dk_Infrared-UV-Visible-Emitters:TSAL6100, from Digikey) and its footprint (digikey-footprints:LED_IR_TSAL6100, from Digikey), ready for a KiCad board. 5,758 are in stock at JLCPCB (part C111836). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

12
dk_Infrared-UV-Visible-Emitters:TSAL6100From Digikey

Footprint

12
digikey-footprints:LED_IR_TSAL6100From Digikey

From the datasheet

9
Works from
-40 °C · Tamb, operating ambient, min · p. 1
Works up to
85 °C · Tamb, operating ambient, max · p. 1
Junction, hottest
100 °C · junction temperature, absolute maximum · p. 1
Forward current, most
100 mA · continuous forward current at Tamb = 25 °C, max · p. 1
Reverse voltage, most
5 V · reverse voltage, absolute maximum · p. 1
Junction to air (T-1¾)
230 K/W · J-STD-051, leads 7 mm soldered on PCB, max · p. 1
Forward voltage
1.35 V · IF = 100 mA, tp = 20 ms, Tamb = 25 °C, typical · p. 2
Forward voltage
2.2 V · IF = 1 A, tp = 100 us, Tamb = 25 °C, typical · p. 2
Edge
15 ns · rise time at IF = 100 mA, Tamb = 25 °C, typical · p. 2

Open-source boards using it

8
  • 2 layers40 × 25 mmFIC-100A, the printed circuit board in 3D

    FIC-100A

    Reemuson/FIC-100A

    USB IR Adapter compatible with Fluke 287 and 289 series multimeters

    40 parts1CERN-OHL-W-2.0
  • 2 layers110 × 68 mmLineFollower, the printed circuit board in 3D

    LineFollower

    InderveerS/LineFollower

    Line following robot

    115 parts
  • 2 layers85 × 98 mmMicromouseLVQ, the printed circuit board in 3D

    MicromouseLVQ

    Quang-Bi/Micromouse-PCB

    micromouse pcb I design for fun

    81 partsMIT
  • 2 layers38.1 × 17.8 mmPhotoSensor, the printed circuit board in 3D

    PhotoSensor

    UserHackable/PhotoSensor

    Photo Sensor Board for a Line-Follower or etc..

    11 parts
  • 2 layers23.8 × 38.5 mmBp5-ir toy v3-rev3, the printed circuit board in 3D

    Bp5-ir toy v3-rev3

    DangerousPrototypes/BusPirate5-hardware

    Bus Pirate Hardware and accessories for v5 and higher

    35 parts125MIT
  • 2 layers32 × 44 mmLapbeacon, the printed circuit board in 3D

    Lapbeacon

    sundevilmotorsports/pcb-dev

    PCB development repository

    45 parts3
  • 2 layers40 × 50 mmOIS L, the printed circuit board in 3D

    OIS L

    derdds/Esit-Internship

    34 parts
  • 2 layers50.8 × 31.8 mmLight barrier v2 transmitter, the printed circuit board in 3D

    Light barrier v2 transmitter

    espena/light-barrier

    Garage door light barrier. KiCad project with schematics and PCB layout.

    24 partsGPL-3.0

Questions

Is there a KiCad symbol and footprint for the TSAL6100?

Yes. The symbol is dk_Infrared-UV-Visible-Emitters:TSAL6100 and the footprint digikey-footprints:LED_IR_TSAL6100, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TSAL6100?

插件,D=5mm, with 2 pins. Its footprint is drawn on this page.

Where is the TSAL6100 datasheet?

Vishay Intertechnology publishes it: the Datasheet link on this page opens it.

Where can I order the TSAL6100?

JLCPCB lists it as part C111836, with 5,758 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TSAL6100?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.