

MicromouseLVQ
micromouse pcb I design for fun
- Size
- 85 × 98 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 65
- Pads
- 240
- Tracks, vias
- 1,011, 168
- Pours
- 403
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Oct 2026
- Updated
- 15 Oct 2026
Overview
MicromouseLVQ is an open-source printed circuit board by Quang-Bi, from the Quang-Bi/Micromouse-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 85 × 98 mm with 81 parts on 65 nets, routed with 1,011 tracks and 168 vias.
It is built around the AMS1117-3.3, AMS1117-5.0 and AO3400A, with the PT334-6B, TSAL6100 and SS24 among its other parts. Its parts include 28 capacitors, 18 resistors, 9 connectors, 8 transistors and 6 diodes. It belongs with the STM32 boards of this library.
Main components
6AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsPT334-6B
插件,D=5mm-25℃~+85℃ 0.4V@2mA 100nA 20mA 30V 75mW 940nm NPN 插件,D=5mm Phototransistors ROHSEverlight ElectronicsPhototransistorsTSAL6100
插件,D=5mm-40℃~+85℃ 1.35V、2.2V 100mA 10° 160mW 30nm 5V 80mW/sr@IF=100mA 940nm 插件,D=5mm Infrared LED Emitters ROHSVishay IntertechnologyInfrared LED EmittersSS24
SMA(DO-214AC)-55℃~+150℃ 200uA@40V 2A 40V 50A 550mV@2A Independent SMA(DO-214AC) Schottky Diodes ROHShongjiachengSchottky Diodes
README
README.mdMicromouse-PCB
micromouse pcb I design for fun
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C6, C8, C16, C18, C20, C22, C23, C25, C26, C27, C28 |
| 9 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5, C7, C15, C17, C19, C21, C24 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R6 |
| 4 | 220 | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14 |
| 4 | 39 | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10 |
| 4 | 47k | Resistor_SMD:R_0603_1608Metric | R15, R16, R17, R18 |
| 4 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q5, Q6, Q7, Q8 |
| 4 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4, J5, J8, J9 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H5, H6, H7, H8 |
| 4 | PT334-6B | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_IRBlack | Q1, Q2, Q3, Q4 |
| 4 | TSAL6100 | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_Clear | D3, D4, D5, D6 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C32, C33 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C29, C30 |
| 2 | GA12 N20 motor | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J2 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C31 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 120R | Ferrite_THT:LairdTech_28C0236-0JW-10 | FB1 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_4x4.5 | C9 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Crystal 8MHz 3225 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | SS24 | Diode_SMD:D_SMA | D7 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD ST-Link | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | SW_SPDT | Button_Switch_THT:SW_CK_JS202011CQN_DPDT_Straight | SW1 |
| 1 | TB6612FNG | custom:TB6612FNG | U4 |
| 1 | UART CP2102 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
Similar boards
- 2 layers38.1 × 17.8 mm

- 2 layers40 × 30 mm

- 4 layers100 × 120 mm

Micromouse pcb
MukeshSethy/micromouse-runner
This is my repo for the first version of full size micromouse development.
184 parts - 2 layers125 × 89.5 mm

- 2 layers

- 2 layers35 × 55 mm

- 2 layers40 × 25 mm

FIC-100A
Reemuson/FIC-100A
USB IR Adapter compatible with Fluke 287 and 289 series multimeters
40 parts1CERN-OHL-W-2.0 - 2 layers110 × 68 mm

Questions
How big is the MicromouseLVQ PCB?
It measures 85 × 98 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MicromouseLVQ use?
81 parts, built around the AMS1117-3.3, AMS1117-5.0, AO3400A and PT334-6B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MicromouseLVQ KiCad files?
From the Quang-Bi/Micromouse-PCB repository on GitHub, at the commit this page was made from: the board is MicromouseLVQ.kicad_pcb and its schematic MicromouseLVQ.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MicromouseLVQ design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).