Skip to the content
12345

TPS73101DBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.2V~5.5V 100mV@(150mA) 150mA 30uVrms 37dB@(10kHz)、58dB@(100Hz) 400uA 5.5V Adjustable Over Current Protection、Over Temperature Protection、Over Voltage Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TPS73101DBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
3,512 at JLCPCB (C129359)
Used on
13 open-source boards

Overview

The TPS73101DBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.2V~5.5V 100mV@(150mA) 150mA 30uVrms 37dB@(10kHz)、58dB@(100Hz) 400uA 5.5V Adjustable Over Current Protection、Over Temperature Protection、Over Voltage Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS73101DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 3,512 are in stock at JLCPCB (part C129359). 13 open-source boards in 10 repositories on GitHub use it.

Symbol

1IN2GND3EN4FB5OUT
Regulator_Linear:TPS73101DBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

16
Supply, least
1.7 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute maximum · p. 4
Junction, hottest
150 °C · TJ, absolute maximum · p. 4
Gives
150 mA · IOUT, rated continuous maximum · p. 4
Feedback reference
1.204 V · VFB, typical at TJ = 25°C · p. 5
Dropout
30 mV · VDO, typical at IOUT = 150mA · p. 5
Current limit
360 mA · ICL, typical at VOUT = 0.9 × VOUT(nom) · p. 5
Takes working
400 µA · IGND, typical at IOUT = 10mA, new silicon · p. 5
Takes asleep
20 nA · ISHDN, typical with VEN ≤ 0.5V, new silicon · p. 5
Junction to air (DBV (SOT-23))
185.2 K/W · junction-to-ambient, new silicon · p. 4
Junction to air (DBV (SOT-23))
207.2 K/W · junction-to-ambient, legacy silicon · p. 4
Junction to case (DBV (SOT-23))
82.9 K/W · junction-to-case top, new silicon · p. 4
Junction to case (DBV (SOT-23))
124.2 K/W · junction-to-case top, legacy silicon · p. 4
Junction to board (DBV (SOT-23))
53.1 K/W · junction-to-board, new silicon · p. 4
Junction to board (DBV (SOT-23))
35 K/W · junction-to-board, legacy silicon · p. 4

What it is and has

5
Output capacitor stability
Stable with or without capacitors of all types · p. 1
Adjustable output range
1.2V to 5.5V · p. 1
Initial accuracy
0.5% · p. 1
Protection
Thermal and over-current protection, including foldback current limit · p. 18
Package
DBV (SOT-23, 5), 2.9mm × 2.8mm · p. 1

Specifications

46
ParameterConditionsAs printedPage
Input, VIN VINover operating junction temperature rangemin -0.3 · max 6 V4
Enable, VEN VENover operating junction temperature rangemin -0.3 · max 6 V4
Output, VOUT VOUTover operating junction temperature rangemin -0.3 · max 5.5 V4
VNR, VFB VFBTPS73101; over operating junction temperature rangemin -0.3 · max 6 V4
Operating junction, TJ TJmin -55 · max 150 °C4
Storage, Tstg Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101, all pinsmin -500 · max 500 V4
Input supply voltage VINover operating junction temperature rangemin 1.7 · max 5.5 V4
Output current IOUTover operating junction temperature rangemin 0 · max 150 mA4
Operating junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATPS731 New silicon; DBV (SOT-23), 5 PINStyp 185.2 °C/W4
Junction-to-ambient thermal resistance RθJATPS731 Legacy silicon; DBV (SOT-23), 5 PINStyp 207.2 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS731 New silicon; DBV (SOT-23), 5 PINStyp 82.9 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS731 Legacy silicon; DBV (SOT-23), 5 PINStyp 124.2 °C/W4
Junction-to-board thermal resistance RθJBTPS731 New silicon; DBV (SOT-23), 5 PINStyp 53.1 °C/W4
Junction-to-board thermal resistance RθJBTPS731 Legacy silicon; DBV (SOT-23), 5 PINStyp 35 °C/W4
Junction-to-top characterization parameter ψJTTPS731 New silicon; DBV (SOT-23), 5 PINStyp 21.1 °C/W4
Junction-to-top characterization parameter ψJTTPS731 Legacy silicon; DBV (SOT-23), 5 PINStyp 13.5 °C/W4
Junction-to-board characterization parameter ψJBTPS731 New silicon; DBV (SOT-23), 5 PINStyp 52.7 °C/W4
Junction-to-board characterization parameter ψJBTPS731 Legacy silicon; DBV (SOT-23), 5 PINStyp 34.1 °C/W4
Input voltage range(1) VINMinimum VIN = VOUT + VDO or 1.7V, whichever is greatermin 1.7 · max 5.5 V5
Internal reference (TPS73101) VFBTJ = 25°Cmin 1.198 · typ 1.204 · max 1.21 V5
Accuracy(1) (3) VOUTNominal; TJ = 25°C; external resistor tolerance excludedmin -0.5 · max 0.5 %5
Accuracy(1) (3) VOUTVIN, IOUT, and T; VOUT + 0.5V ≤ VIN ≤ 5.5V; 10mA ≤ IOUT ≤ 150mA; external resistor tolerance excludedmin -1 · typ 0.5 · max 1 %5
Line regulation (1) ΔVOUT(ΔVIN)VOUT(nom) + 0.5V ≤ VIN ≤ 5.5Vtyp 0.01 %/V5
Load regulation ΔVOUT(ΔIOUT)1mA ≤ IOUT ≤ 150mAtyp 0.002 %/mA5
Load regulation ΔVOUT(ΔIOUT)10mA ≤ IOUT ≤ 150mAtyp 0.0005 %/mA5
Dropout voltage(4) (VIN = VOUT(NOM) - 0.1V) VDOIOUT = 150mAtyp 30 · max 100 mV5
Output impedance in dropout ZO(DO)1.7V ≤ VIN ≤ VOUT + VDOtyp 0.25 Ω5
Output current limit ICLVOUT = 0.9 × VOUT(nom)min 150 · typ 360 · max 500 mA5
Short-circuit current ISCVOUT = 0Vtyp 200 mA5
Ground pin current IGNDIOUT = 10mA (IQ), legacy silicontyp 400 · max 550 uA5
Ground pin current IGNDIOUT = 10mA (IQ), new silicontyp 400 · max 630 uA5
Ground pin current IGNDIOUT = 150mAtyp 550 · max 750 uA5
Shutdown current (IGND) ISHDNVEN ≤ 0.5V, VOUT ≤ VIN ≤ 5.5V, –40°C ≤ TJ ≤ 100℃, legacy silicontyp 0.02 · max 1 uA5
Shutdown current (IGND) ISHDNVEN ≤ 0.5V, VOUT ≤ VIN ≤ 5.5V, new silicontyp 0.02 · max 1 uA5
Feedback pin current (TPS73101) IFBtyp 0.1 · max 0.3 uA5
Power-supply rejection ratio (ripple rejection) PSRRf = 100Hz, IOUT = 150mAtyp 58 dB5
Power-supply rejection ratio (ripple rejection) PSRRf = 10kHz, IOUT = 150mAtyp 37 dB5
EN pin high (enabled) VEN(high)Maximum VINmin 1.7 V5
EN pin low (shutdown) VEN(low)min 0 · max 0.5 V5
Enable pin current (enabled) IEN(high)VEN = 5.5Vtyp 0.02 · max 0.1 uA5
Thermal shutdown temperature TSDShutdown, temperature increasingtyp 160 °C5
Thermal shutdown temperature TSDReset, temperature decreasingtyp 140 °C5
Operating junction temperature TJmin -40 · max 125 ℃5

Pins, by the datasheet

5
1 IN
Input supply. · p. 3
2 GND
Ground. · p. 3
3 EN
High enables the regulator; low selects shutdown. Connect to IN if unused. · p. 3
4 FB
Input to the control loop error amplifier used to set the adjustable output voltage. · p. 3
5 OUT
Regulator output; no output capacitor is required for stability. · p. 3

Open-source boards using it

13See all 13
  • 6 layers80 × 49 mmButterStick, the printed circuit board in 3D

    ButterStick

    butterstick-fpga/butterstick-hardware

    Basic ECP5 based GigE to SYZYGY interface.

    256 parts225
  • 4 layers100 × 74 mmBeaglelogic standalone, the printed circuit board in 3D

    Beaglelogic standalone

    abhishek-kakkar/beaglelogic-standalone

    BeagleLogic implemented as a turnkey and standalone logic analyzer

    260 parts15
  • 2 layers20.8 × 51.3 mmGw1ns2c board, the printed circuit board in 3D

    Gw1ns2c board

    Disasm/honeycomb-pcb

    An experimental board with GW1NS-2C FPGA.

    39 parts2
  • 2 layers17.8 × 43.2 mmLeech, the printed circuit board in 3D

    Leech

    Disasm/leech-pcb

    An extension board with iCE40UP5k for the STM32F411 "Black Pill" board.

    15 parts1
  • 4 layers134.6 × 127 mmH750 Base, the printed circuit board in 3D

    H750 Base

    CalciumCarbideElectronic/STM32H750VB-Mobo

    Motherboard for STM32H750VB Coreboard

    281 parts
  • 4 layers59.8 × 52.9 mmCw key ble keyboard, the printed circuit board in 3D

    Cw key ble keyboard

    ikatkov/cw-key-ble-keyboard

    Main purpose is to practice morse code in the Morse Mania iOS app with a real morse code key.

    21 partsMIT
  • 2 layers50.2 × 19.4 mmHead3, the printed circuit board in 3D

    Head3

    kntzn/head

    77 parts
  • 4 layers80 × 49 mmGlasgow, the printed circuit board in 3D

    Glasgow

    GlasgowEmbedded/glasgow

    Scots Army Knife for electronics

    118 parts2.2k0BSD

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS73101DBV?

Yes. The symbol is Regulator_Linear:TPS73101DBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS73101DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS73101DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS73101DBV?

JLCPCB lists it as part C129359, with 3,512 in stock; the sellers' links on this page open their listings.

What can replace the TPS73101DBV?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS73101DBV?

13 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.