
TPS54560BDDAR
Texas InstrumentsExtended
-40℃~+150℃@(TJ) 1 146uA 4.5V~60V 500kHz 5A 800mV~58.8V Adjustable Buck Buck Built-in No SO-8 DC-DC Converters ROHS
- Part id
- ti/TPS54560BDDAR
- Category
- DC DC Converters
- Package
- SO-8
- Pins
- 9
- In stock
- 26,842 at JLCPCB (C1850354)
- Used on
- 6 open-source boards
Overview
The TPS54560BDDAR is a DC DC Converter made by Texas Instruments in a SO-8 package with 9 pins. -40℃~+150℃@(TJ) 1 146uA 4.5V~60V 500kHz 5A 800mV~58.8V Adjustable Buck Buck Built-in No SO-8 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (Regulator_Switching:TPS54560BDDA, from KiCad's library) and its footprint (Package_SO:Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm, from KiCad's library), ready for a KiCad board. 26,842 are in stock at JLCPCB (part C1850354). 6 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
13- Supply, least
- 4.5 V · VIN, minimum operating input voltage · p. 5
- Supply, most
- 60 V · VIN, maximum operating input voltage · p. 5
- Supply, absolute maximum
- 65 V · VIN, absolute maximum · p. 4
- Junction, hottest
- 150 °C · Maximum operating junction temperature · p. 4
- Takes working
- 146 µA · Typical operating nonswitching supply current, FB = 0.9 V, TA = 25°C · p. 5
- Takes asleep
- 2.25 µA · Typical shutdown supply current, EN = 0 V, 25°C · p. 5
- Gives
- 5 A · Maximum recommended output current · p. 4
- Current limit
- 7.9 A · Typical open-loop current limit, all VIN and temperatures · p. 5
- Feedback reference
- 800 mV · Typical voltage reference · p. 5
- Switches at
- 500 kHz · Typical switching frequency, RT = 200 kΩ · p. 5
- Junction to air (DDA (HSOIC))
- 42 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to board (DDA (HSOIC))
- 23.4 K/W · Junction-to-board thermal resistance · p. 4
- Junction to case (DDA (HSOIC))
- 45.8 K/W · Junction-to-case top thermal resistance · p. 4
What it is and has
5- External synchronization
- Synchronizes to external clock · p. 1
- Undervoltage lockout
- Adjustable UVLO and hysteresis · p. 1
- Voltage reference
- 0.8 V, 1% · p. 1
- Package
- 8-Pin HSOIC with PowerPAD · p. 1
- High-side MOSFET
- 92 mΩ · p. 1
Around it
8- ind 7.2 μH
- between SW and VOUT; Design example; WE 7447798720, with 7.9 A saturation and 6 A RMS current ratings. · p. 26
- cap 3 × 47 μF
- between VOUT and GND; Design example; 10 V ceramic capacitors, 5 mΩ ESR, derated total capacitance 87.4 uF. · p. 27
- diode B560C-13-F
- between GND and SW; Design example catch Schottky diode; anode to GND and cathode to SW. · p. 27
- cap at least 3 μF
- between VIN and GND; Effective input decoupling capacitance; X5R or X7R ceramic. Voltage rating must exceed maximum input voltage. · p. 28
- cap 4 × 2.2 μF
- between VIN and GND; Design example; four 100 V ceramic capacitors in parallel. · p. 28
- cap 0.1 μF
- between BOOT and SW; Required ceramic bootstrap capacitor; X5R or better dielectric, rated at least 10 V. · p. 29
- res 442 kΩ
- between VIN and EN; Example UVLO upper divider resistor RUVLO1; paired with 90.9 kΩ for 6.5 V start and 5 V stop. · p. 29
- res 90.9 kΩ
- between EN and GND; Example UVLO lower divider resistor RUVLO2; paired with 442 kΩ for 6.5 V start and 5 V stop. · p. 29
Specifications
58| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Input voltage | VIN | min -0.3 · max 65 V | 4 |
| Input voltage | EN | min -0.3 · max 8.4 V | 4 |
| Input voltage | BOOT | max 73 V | 4 |
| Input voltage | COMP | min -0.3 · max 3 V | 4 |
| Input voltage | RT/CLK | min -0.3 · max 3.6 V | 4 |
| Input voltage | BOOT-SW | max 8 V | 4 |
| Output voltage | SW | min -0.6 · max 65 V | 4 |
| Output voltage | SW, 10-ns transient | min -2 · max 65 V | 4 |
| Operating junction temperature | min -40 · max 150 °C | 4 | |
| Storage temperature range Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | min -2000 · max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101 | min -500 · max 500 V | 4 |
| Supply input voltage VIN | Minimum is VO + VDO; see Equation 1 | max 60 V | 4 |
| Output voltage VO | min 0.8 · max 58.8 V | 4 | |
| Output current IO | min 0 · max 5 A | 4 | |
| Junction Temperature TJ | min -40 · max 150 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | DDA (HSOIC), 8 PINS | typ 42 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | DDA (HSOIC), 8 PINS | typ 45.8 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | DDA (HSOIC), 8 PINS | typ 23.4 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | DDA (HSOIC), 8 PINS | typ 5.9 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | DDA (HSOIC), 8 PINS | typ 23.4 °C/W | 4 |
| Junction-to-case (bottom) thermal resistance RθJC(bot) | DDA (HSOIC), 8 PINS | typ 3.6 °C/W | 4 |
| Operating input voltage | TJ = –40°C to +150°C | min 4.5 · max 60 V | 5 |
| Internal undervoltage lockout threshold | Rising | min 4.1 · typ 4.3 · max 4.48 V | 5 |
| Internal undervoltage lockout threshold hysteresis | typ 325 mV | 5 | |
| Shutdown supply current | EN = 0 V, 25°C, 4.5 V ≤ VIN ≤ 60 V | typ 2.25 · max 4.5 uA | 5 |
| Operating: nonswitching supply current | FB = 0.9 V, TA = 25°C | typ 146 · max 175 uA | 5 |
| Enable threshold voltage | No voltage hysteresis, rising and falling | min 1.1 · typ 1.2 · max 1.3 V | 5 |
| Input current | Enable threshold +50 mV | typ -4.6 uA | 5 |
| Input current | Enable threshold –50 mV | min -0.58 · typ -1.2 · max -1.8 uA | 5 |
| Hysteresis current | min -2.2 · typ -3.4 · max -4.5 uA | 5 | |
| Voltage reference | min 0.792 · typ 0.8 · max 0.808 V | 5 | |
| On-resistance | VIN = 12 V, BOOT-SW = 6 V | typ 92 · max 190 mΩ | 5 |
| Input current | Error amplifier | typ 50 nA | 5 |
| Error amplifier dc gain | VFB = 0.8 V | typ 10000 V/V | 5 |
| Min unity gain bandwidth | typ 2500 kHz | 5 | |
| Error amplifier source/sink | V(COMP) = 1 V, 100 mV overdrive; source | typ 30 uA | 5 |
| Error amplifier source/sink | V(COMP) = 1 V, 100 mV overdrive; sink | typ -30 uA | 5 |
| COMP to SW current transconductance | typ 17 A/V | 5 | |
| Current limit test | All VIN and temperatures, open loop (1) | min 6.3 · typ 7.9 · max 9.5 A | 5 |
| Current limit test | All temperatures, VIN = 12 V, open loop (1) | min 6.3 · typ 7.9 · max 9.5 A | 5 |
| Current limit test | VIN = 12 V, TA = 25°C, Open Loop (1) | min 7 · typ 7.9 · max 8.8 A | 5 |
| Thermal shutdown | typ 176 °C | 5 | |
| Thermal shutdown hysteresis | typ 12 °C | 5 | |
| Switching frequency range using RT mode | min 100 · max 2500 kHz | 5 | |
| Switching frequency fSW | RT = 200 kΩ | min 450 · typ 500 · max 550 kHz | 5 |
| Switching frequency range using CLK mode | min 160 · max 2300 kHz | 5 | |
| RT/CLK high threshold | typ 1.55 · max 2 V | 5 | |
| RT/CLK low threshold | min 0.5 · typ 1.2 V | 5 | |
| Enable to COMP active | VIN = 12 V, TA = 25°C | typ 340 us | 6 |
| Soft-start time | fSW = 500 kHz, 10% to 90% | typ 2.1 ms | 6 |
| Soft-start time | fSW = 2.5 MHz, 10% to 90% | typ 0.42 ms | 6 |
| Error amplifier transconductance (gM) | –2 uA < ICOMP < 2 uA, VCOMP = 1 V | typ 350 us | 6 |
| Error amplifier transconductance (gM) during soft start | –2 uA < ICOMP < 2 uA, VCOMP = 1 V, VFB = 0.4 V | typ 77 us | 6 |
| Current limit threshold delay | typ 60 ns | 6 | |
| Minimum CLK input pulse width | typ 15 ns | 6 | |
| RT/CLK falling edge to SW rising edge delay | Measured at 500 kHz with RT resistor in series | typ 55 ns | 6 |
| PLL lock in time | Measured at 500 kHz | typ 78 us | 6 |
Pins, by the datasheet
9- 1 BOOT
- Connect a bootstrap capacitor between BOOT and SW; the output switches off if its voltage is insufficient until the capacitor is refreshed. · p. 3
- 2 VIN
- Input supply voltage with 4.5-V to 60-V operating range. · p. 3
- 3 EN
- Enable with internal pullup; pull below 1.2 V to disable, float to enable, or use two resistors to adjust input undervoltage lockout. · p. 3
- 4 RT/CLK
- Connect a resistor to ground to set switching frequency or apply an external clock for synchronization; returns to resistor programming when clock edges stop. · p. 3
- 5 FB
- Inverting input of the transconductance (gm) error amplifier. · p. 3
- 6 COMP
- Error amplifier output and PWM comparator input; connect frequency compensation components. · p. 3
- 7 GND
- Ground. · p. 3
- 8 SW
- Source of the internal high-side power MOSFET and converter switching node. · p. 3
- — Thermal pad
- Electrically connect the exposed pad to the GND pin on the printed circuit board for proper operation. · p. 3
Ordering codes, by the datasheet
4- TPS54560BDDA
- SO PowerPAD (DDA), 8 pins · 75 units, tube; NIPDAU or NIPDAUAG lead finish · p. 42
- TPS54560BDDA.B
- SO PowerPAD (DDA), 8 pins · 75 units, tube; NIPDAU lead finish · p. 42
- TPS54560BDDAR
- SO PowerPAD (DDA), 8 pins · 2500 units, large tape and reel; NIPDAUAG lead finish · p. 42
- TPS54560BDDAR.B
- SO PowerPAD (DDA), 8 pins · 2500 units, large tape and reel; NIPDAUAG lead finish · p. 42
Open-source boards using it
6- 2 layers82.5 × 26.5 mm

- 4 layers86 × 90 mm

Sc02 drive
KVR-CIBER/sc02-solar-hypercar
SC-02 Solar Hypercar: 3D-printbare Le-Mans-racer op zonne-energie met Pi 4 + ESP32-S3, CadQuery-CAD en three.js-simulatie
94 parts - 2 layers20 × 160 mm

Zibs Saber v2
PedroBMedeiros/PolySaber
Firmware for Cal Poly Senior Project - PolySaber a Custom PCB Soundboard
75 parts - 4 layers76 × 54 mm

Pixelblaze battery backpack
SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics
112 parts1 - 4 layers110 × 80 mm

Spin rig controller
Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation
170 parts1GPL-3.0 - 8 layers34.5 × 31.5 mm

Questions
Is there a KiCad symbol and footprint for the TPS54560BDDAR?
Yes. The symbol is Regulator_Switching:TPS54560BDDA and the footprint Package_SO:Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS54560BDDAR?
SO-8, with 9 pins. Its footprint is drawn on this page.
Where is the TPS54560BDDAR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS54560BDDAR?
JLCPCB lists it as part C1850354, with 26,842 in stock; the sellers' links on this page open their listings.
Which open-source boards use the TPS54560BDDAR?
6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.