
RP2350 80QFN minimal
Sphyrna-029/Pico-Pilot
A simple auto pilot for land/water based robots based on the Raspberry Pi rp2350B/2354B

Buck converter TPS54560 is an open-source printed circuit board by akiratanaya, from the akiratanaya/electrical_design_challenge repository on GitHub. It is a 2-layer board of 82.5 × 26.5 mm with 25 parts on 10 nets, routed with 100 tracks and 15 vias.
It is built around the TPS54560BDDAR, SS56 and XT30PW-F, with the XT30PW-M among its other parts. Its parts include 10 capacitors, 6 resistors, 2 connectors, 1 IC and 1 diode. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4.7uF | Capacitor_SMD:C_1210_3225Metric | C1, C2, C3, C10 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 22uF | Capacitor_SMD:C_1210_3225Metric | C6, C7, C9 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10.2k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 143k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 17k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 18uH | Inductor_SMD:L_Sunlord_MWSA1206S-180 | L1 |
| 1 | 19.6 k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 205 k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 243k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 6200pF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | SS56 | SS56:SMC | D1 |
| 1 | TPS54560BDDAR | footprints:SO-POWERPAD8_DDA_TEX | U2 |
| 1 | XT30PW-F | XT30PW-F:AMASS_XT30PW-F | J1 |
| 1 | XT30PW-M | XT30PW-M:AMASS_XT30PW-M | J2 |

Sphyrna-029/Pico-Pilot
A simple auto pilot for land/water based robots based on the Raspberry Pi rp2350B/2354B

KVR-CIBER/sc02-solar-hypercar
SC-02 Solar Hypercar: 3D-printbare Le-Mans-racer op zonne-energie met Pi 4 + ESP32-S3, CadQuery-CAD en three.js-simulatie

PedroBMedeiros/PolySaber
Firmware for Cal Poly Senior Project - PolySaber a Custom PCB Soundboard
SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics

Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation


Kelvin-Ziqi-Zhao/drone-current-sensor-board
High current sensor board for battery+capacitor power supply system

ThunderFly-aerospace/TFSBEC01
High efficient switching power supply for UAV actuators.
It measures 82.5 × 26.5 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the TPS54560BDDAR, SS56, XT30PW-F and XT30PW-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the akiratanaya/electrical_design_challenge repository on GitHub, at the commit this page was made from: the board is electrical_design_challenge/electrical_design_1/buck_converter_TPS54560/buck_converter_TPS54560.kicad_pcb and its schematic TPS54560_ws/buck_converter_TPS54560/buck_converter_TPS54560.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask akiratanaya before reusing the design.