Skip to the content
123456789999

TPS54336ADDA

Texas InstrumentsExtended

-40℃~+85℃@(TA) 1 340kHz 3A 4.5V~28V 800mV~24V Buck Buck Built-in Yes SO-8 DC-DC Converters ROHS

Part id
ti/TPS54336ADDA
Category
DC DC Converters
Package
SO-8
Pins
9
In stock
5 at JLCPCB (C1355769)
Used on
6 open-source boards

Overview

The TPS54336ADDA is a DC DC Converter made by Texas Instruments in a SO-8 package with 9 pins. -40℃~+85℃@(TA) 1 340kHz 3A 4.5V~28V 800mV~24V Buck Buck Built-in Yes SO-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS54336ADDA, from KiCad's library) and its footprint (Package_SO:TI_SO-PowerPAD-8, from KiCad's library), ready for a KiCad board. 5 are in stock at JLCPCB (part C1355769). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

1BOOT2VIN3PH4GND5VSENSE6COMP7EN8SS9ETPAD
Regulator_Switching:TPS54336ADDAFrom KiCad's library

Footprint

123456789999
Package_SO:TI_SO-PowerPAD-8From KiCad's library

Pinout

9
The pins of the TPS54336ADDA
PinNameType
1BOOTOutput
2VINPower in
3PHOutput
4GNDPower in
5VSENSEInput
6COMPOutput
7ENInput
8SSOutput
9ETPADPower in

Open-source boards using it

6
  • 4 layers50 × 50 mmFlightController Drone, the printed circuit board in 3D

    FlightController Drone

    damnitzhemanth-oss/Flight_Controller

    Custom STM based flightcontroller designed from scratch.

    157 parts
  • 2 layers68 × 98 mmSpindle driver, the printed circuit board in 3D

    Spindle driver

    dougsthenri/spindle_driver_v1

    PCB project for a BLDC motor driver tailored for CNC spindle motors

    97 parts
  • 2 layers250 × 150 mmStratoSTEAM, the printed circuit board in 3D

    StratoSTEAM

    robotgtfxry/StratoSTEAM

    112 parts
  • 4 layers64.1 × 50.5 mmFlight controller version1, the printed circuit board in 3D

    Flight controller version1

    santhazsolt/stm32-based-quadcopter-drone

    Custom STM32F411 quadcopter flight controller: KiCad PCB, embedded C, ICM-20948 IMU over SPI, quaternion complementary filter, PID attitude control.

    81 partsMIT
  • 2 layers24 × 41.5 mmEspCANshield, the printed circuit board in 3D

    EspCANshield

    subbumani12/ESP32_CAN_Shield

    A compact ESP32 CAN Shield featuring an SN65HVD230 transceiver, automotive-grade input protection, and an onboard TPS5435A buck converter for reliable CAN bus interfacing.

    31 parts
  • 4 layers71.4 × 80.3 mmEx2, the printed circuit board in 3D

    Ex2

    zaidhajji/Custom-Flight-Controller-Design-STM32F407-KiCad

    Designed a custom flight controller board from schematic to layout: STM32F407VGTx MCU, MPU6050 IMU, BMP280 barometer, MicroSD logging, 6 servo/ESC outputs, and dual-stage power regulation.

    93 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS54336ADDA?

Yes. The symbol is Regulator_Switching:TPS54336ADDA and the footprint Package_SO:TI_SO-PowerPAD-8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS54336ADDA?

SO-8, with 9 pins. Its footprint is drawn on this page.

Where is the TPS54336ADDA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS54336ADDA?

JLCPCB lists it as part C1355769, with 5 in stock; the sellers' links on this page open their listings.

What can replace the TPS54336ADDA?

Parts like it in the library: the TPS5430DDAR by Texas Instruments, the TPS54360DDA by Texas Instruments, the TPS54531DDAR by Texas Instruments and the ST1S14PHR by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS54336ADDA?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.