

Spindle driver
PCB project for a BLDC motor driver tailored for CNC spindle motors
- Size
- 68 × 98 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 99
- Pads
- 432
- Tracks, vias
- 895, 575
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Apr 2025
- Updated
- 3 Apr 2025
Overview
Spindle driver is an open-source printed circuit board by dougsthenri, from the dougsthenri/spindle_driver_v1 repository on GitHub. It is a 2-layer board of 68 × 98 mm with 97 parts on 99 nets, routed with 895 tracks and 575 vias.
It is built around the ST1480ABDR, DRV8323SRTAR and TPS54336ADDA, with the USBLC6-2SC6, CSD18531Q5A and PMEG4010CEGWJ among its other parts. Its parts include 35 capacitors, 19 resistors, 12 connectors, 6 transistors and 5 ICs. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
7ST1480ABDR
SO-8-40℃~+85℃ 1 1 15Mbps 2.2mA 3V~3.6V 64 Half-Duplex Transceiver ±15kV SO-8 RS-485 / RS-422 ICs ROHSSTMicroelectronicsRS-485 / RS-422 ICsDRV8323SRTAR
WQFN-40-EP(6x6)-40℃~+125℃ 12uA 1A 3 6V~60V SPI Three Phase WQFN-40-EP(6x6) Brushless DC (BLDC) Motor Driver ROHSTexas InstrumentsBrushless DC (BLDC) Motor DriverTPS54336ADDA
SO-8-40℃~+85℃@(TA) 1 340kHz 3A 4.5V~28V 800mV~24V Buck Buck Built-in Yes SO-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)CSD18531Q5A
VSONP-8(5x6)-55℃~+175℃ 1 N-channel 1.8V 134A 14pF 156W 3.5mΩ@10V 3.84nF 36nC@10V 60V N-Channel VSONP-8(5x6) MOSFETs ROHSTexas InstrumentsMOSFETsPMEG4010CEGWJ
SOD-1231 Independent 1A 40V 50uA@40V 570mV@1A 9A SOD-123 Schottky Diodes ROHSNexperiaSchottky DiodesPMEG4010CPASX
DFN2020D-31 Pair Common Cathode 1A 40V 500mV@1A 55uA@40V DFN2020D-3 Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdspindle_driver Version 1.1
PCB project for a BLDC motor driver tailored for CNC spindle motors.

Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1µF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C17, C18, C27, C28, C29, C35 |
| 6 | CSD18531Q5A | Extra:TDSON-8-1 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R10, R19 |
| 5 | Net-Tie_2 | Extra:NetTie-2_SMD_Pad0.25mm | NT1, NT2, NT3, NT4, NT5 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 0.001µF | Capacitor_SMD:C_0805_2012Metric | C15, C16, C19 |
| 3 | 100 | Capacitor_SMD:C_0805_2012Metric | R11, R12, R13 |
| 3 | 1m | Resistor_SMD:R_2512_6332Metric | R7, R8, R9 |
| 3 | 2.2µF | Capacitor_SMD:C_1210_3225Metric | C9, C10, C11 |
| 3 | 3.3nF | Capacitor_SMD:C_0805_2012Metric | C24, C25, C26 |
| 3 | 3k3 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C13, C31 |
| 2 | 120R | Inductor_SMD:L_0805_2012Metric | L1, L2 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 1µF | Capacitor_SMD:C_0603_1608Metric | C8, C14 |
| 2 | EXPANSION | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J11, J12 |
| 2 | RJ12_Shielded | Extra:RJ12 | J9, J10 |
| 1 | 0.1µF | Capacitor_SMD:C_1206_3216Metric | C23 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 10µF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C12 |
| 1 | 10µH | Extra:SRN6045-100M | L3 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 15nF | Capacitor_SMD:C_0805_2012Metric | C32 |
| 1 | 1µF | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 220µF | Capacitor_SMD:CP_Elec_6.3x5.9 | C34 |
| 1 | 240pF | Capacitor_SMD:C_0805_2012Metric | C33 |
| 1 | 27µF | Capacitor_SMD:CP_Elec_6.3x5.8 | C30 |
| 1 | 32k | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 3k32 | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 470µF | Extra:EEU-FS1K471L | C22 |
| 1 | 47nF | Capacitor_SMD:C_1812_4532Metric | C6 |
| 1 | 680 | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DFU_EN | Extra:Alps_SSSS213000 | SW1 |
| 1 | DRV8323SRTA | Extra:Texas_S-PWQFN-N40 | U1 |
| 1 | GREEN | Extra:LED_PLCC-2 | D1 |
| 1 | Hall Sensors | Extra:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal_Protruded | J1 |
| 1 | INHB | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | INLA | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | INLC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | JTAG/SWD | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J6 |
| 1 | M_PWR | Extra:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J7 |
| 1 | Motor | Extra:PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal_Protuded | J5 |
| 1 | PMEG4010CEGWJ | Diode_SMD:D_SOD-123 | D3 |
| 1 | PMEG4010CPASX | Extra:SOT1061 | D2 |
| 1 | Project_ID_700dpi | Extra:Project_ID_700dpi | G0 |
| 1 | RESET | Extra:SW_SPST_EVQQ2 | SW2 |
| 1 | ST1480ABDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | STM32L486RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | TERM_EN | Extra:Alps_SSSS213000 | SW3 |
| 1 | TPS54336ADDA | Package_SO:TI_SO-PowerPAD-8 | U4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_B | Extra:USB_B_Samtec_USBR-B-S-S-O-TH_Horizontal_Protruded | J8 |
Similar boards
- 2 layers70.6 × 100 mm

- 4 layers50 × 50 mm

FlightController Drone
damnitzhemanth-oss/Flight_Controller
Custom STM based flightcontroller designed from scratch.
157 parts - 4 layers52.1 × 55.6 mm

- 2 layers82.8 × 63 mm

- 4 layers170 × 74.5 mm

- 2 layers50 × 50 mm

SW48A2
CarloMara/didactic-octo-PSU
So, @nicogela and I decided to build a LAB PSU, but because we're lazy people and we don't like to carry weight we're tring to unite the high efficiency of the switching topologies to the high stability and low noise of…
40 parts - 2 layers250 × 150 mm

- 4 layers64.1 × 50.5 mm

Flight controller version1
santhazsolt/stm32-based-quadcopter-drone
Custom STM32F411 quadcopter flight controller: KiCad PCB, embedded C, ICM-20948 IMU over SPI, quaternion complementary filter, PID attitude control.
81 partsMIT
Questions
How big is the Spindle driver PCB?
It measures 68 × 98 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spindle driver use?
97 parts, built around the ST1480ABDR, DRV8323SRTAR, TPS54336ADDA and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spindle driver KiCad files?
From the dougsthenri/spindle_driver_v1 repository on GitHub, at the commit this page was made from: the board is spindle_driver.kicad_pcb and its schematic pwr&io.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spindle driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask dougsthenri before reusing the design.