Skip to the content
12345

TLV75528PDBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 2.8V 25uA 325mV@(500mA) 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Soft Start、Enable、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV75528PDBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
0 at JLCPCB (C2868951)
Used on
5 open-source boards

Overview

The TLV75528PDBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 2.8V 25uA 325mV@(500mA) 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Soft Start、Enable、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TLV75528PDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2868951). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

IN1GND2EN3OUT5
Regulator_Linear:TLV75528PDBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the TLV75528PDBV
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

5
  • 4 layers71 × 57.5 mmEoC Lab, the printed circuit board in 3D

    EoC Lab

    jackshisd/EoC-Lab

    ESP32-based infant wearable for audio and video data acquisition with SD storage, BLE-triggered recording, and USB mass storage support.

    85 parts2
  • 4 layers140.6 × 108.1 mmDrone, the printed circuit board in 3D

    Drone

    iridia-ulb/drone-pcb

    Printed circuit board for the drone

    228 parts1
  • 4 layers59.4 × 19.6 mmPcb right, the printed circuit board in 3D

    Pcb right

    SINRG-Lab/Drakon_AIGlasses

    Hardware, firmware, and 3D models for the Drakon AI smart glasses.

    58 parts
  • 2 layers32.3 × 29.2 mmCanSat 2019 Kamera, the printed circuit board in 3D

    CanSat 2019 Kamera

    ApoapsisHGV/CanSat2019-electronics

    Circuit and PCB design files related to our 2019 CanSat competition

    32 parts1MIT
  • 4 layers140.6 × 108.1 mmDrone, the printed circuit board in 3D

    Drone

    iridia-ulb/drone-pcb

    Printed circuit board for the drone

    217 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV75528PDBV?

Yes. The symbol is Regulator_Linear:TLV75528PDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV75528PDBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TLV75528PDBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV75528PDBV?

JLCPCB lists it as part C2868951, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TLV75528PDBV?

Parts like it in the library: the RT9013-28GB by TECH PUBLIC, the ETA5050V28S2F by etasolution, the WL9004S5-28 by WPMtek and the TLV75728PDBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV75528PDBV?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.