TLV74133PDBV
Texas InstrumentsExtended
-40℃~+125℃@(Tj) 1 150mA 3.3V 445mV@(150mA) 5.5V 50uA 65dB@(1kHz) 73uVrms Fixed Over Current Protection、Thermal shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- ti/TLV74133PDBV
- Category
- Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
- Package
- SOT-23-5
- Pins
- 5
- In stock
- 2,388 at JLCPCB (C471862)
Overview
The TLV74133PDBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 150mA 3.3V 445mV@(150mA) 5.5V 50uA 65dB@(1kHz) 73uVrms Fixed Over Current Protection、Thermal shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 2,388 are in stock at JLCPCB (part C471862).
Symbol
Footprint
From the datasheet
13- Supply, least
- 1.4 V · VIN, recommended operating min · p. 4
- Supply, most
- 5.5 V · VIN, recommended operating max · p. 4
- Supply, absolute maximum
- 6 V · VIN, absolute max · p. 4
- Junction, hottest
- 125 °C · Junction temperature absolute max · p. 4
- Takes working
- 50 µA · Ground pin current typical, IOUT = 0 mA · p. 5
- Takes asleep
- 100 nA · Shutdown current typical, VEN ≤ 0.4 V, TJ = 25°C · p. 5
- Gives
- 150 mA · Recommended output current max · p. 4
- Current limit
- 180 mA · Output current limit min, VIN = 3.8 V, VOUT = 3.3 V, TJ = –40 to 85°C · p. 6
- Dropout
- 46 mV · Typical at IOUT = 30 mA, 3 V ≤ VOUT < 3.6 V, TJ = –40°C to 85°C · p. 5
- Dropout
- 230 mV · Typical at IOUT = 150 mA, 3 V ≤ VOUT < 3.6 V, TJ = –40°C to 85°C · p. 5
- Junction to air (DBV (SOT-23))
- 249 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (DBV (SOT-23))
- 172.7 K/W · Junction-to-case (top) thermal resistance · p. 4
- Junction to board (DBV (SOT-23))
- 76.7 K/W · Junction-to-board thermal resistance · p. 4
What it is and has
9- Regulator
- 150-mA low-dropout regulator with foldback current limit · p. 1
- Capacitor stability
- Stable with 1-µF ceramic capacitors · p. 1
- Protection
- Foldback overcurrent protection · p. 1
- Package option
- 5-Pin SOT-23 · p. 1
- Package option
- 4-Pin X2SON · p. 1
- Accuracy
- 1% · p. 1
- Output discharge
- Active output discharge, P version only · p. 1
- Protection
- Thermal protection · p. 11
- Package
- 5-Pin SOT-23 · p. 1
Around it
4- cap 1 µF
- between IN and GND; Nominal recommended input capacitance; minimum is 0 uF. · p. 4
- cap 1 µF
- between OUT and GND; Ceramic capacitor for best transient response. · p. 3
- cap 1 µF
- between OUT and GND; Ceramic; place as close as possible to OUT, no more than 10 mm away. · p. 16
- cap 1 µF
- between IN and GND; Place as close as possible to IN for best transient performance. · p. 16
Specifications
37| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage VIN | Input; all voltages with respect to GND | min -0.3 · max 6 V | 4 |
| Voltage VEN | Enable; maximum VIN + 0.3 V | min -0.3 V | 4 |
| Voltage VOUT | Output | min -0.3 · max 3.6 V | 4 |
| Temperature TJ | Junction | min -55 · max 125 °C | 4 |
| Temperature Tstg | Storage | min -55 · max 150 °C | 4 |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±2000 V | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ±500 V | max 500 V | 4 |
| Input voltage VIN | Over operating junction temperature range | min 1.4 · max 5.5 V | 4 |
| Enable range VEN | Maximum VIN | min 0 V | 4 |
| Output current IOUT | min 0 · max 150 mA | 4 | |
| Input capacitor CIN | NOM column: 1 uF | min 0 · typ 1 uF | 4 |
| Output capacitor COUT | min 1 · max 100 uF | 4 | |
| Operating junction temperature TJ | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | DBV (SOT-23), 5 PINS | typ 249 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | DBV (SOT-23), 5 PINS | typ 172.7 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | DBV (SOT-23), 5 PINS | typ 76.7 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | DBV (SOT-23), 5 PINS | typ 49.7 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | DBV (SOT-23), 5 PINS | typ 75.8 °C/W | 4 |
| Output voltage range VOUT | Family output voltage range | min 1 · max 3.3 V | 5 |
| DC output accuracy | VOUT ≥ 1.8 V; TJ = 25°C | min -1 · max 1 % | 5 |
| DC output accuracy | VOUT ≥ 1.2 V; –40°C ≤ TJ ≤ 125°C | min -1.5 · max 1.5 % | 5 |
| Line regulation ΔVOUT(ΔVIN) | Maximum {VOUT(nom) + 0.5 V, VIN = 2 V} ≤ VIN ≤ 5.5 V | typ 1 · max 5 mV | 5 |
| Load regulation ΔVOUT(ΔIOUT) | 0 mA ≤ IOUT ≤ 150 mA | typ 10 · max 30 mV | 5 |
| Dropout voltage VDO | VOUT = 0.98 × VOUT(nom); TJ = –40°C to 85°C; 3 V ≤ VOUT < 3.6 V; IOUT = 30 mA | typ 46 mV | 5 |
| Dropout voltage VDO | VOUT = 0.98 × VOUT(nom); TJ = –40°C to 85°C; 3 V ≤ VOUT < 3.6 V; IOUT = 150 mA | typ 230 · max 420 mV | 5 |
| Dropout voltage VDO | VOUT = 0.98 × VOUT(nom); TJ = –40°C to 125°C; 3 V ≤ VOUT < 3.6 V; IOUT = 150 mA | typ 230 · max 540 mV | 5 |
| Ground pin current IGND | IOUT = 0 mA | typ 50 · max 75 uA | 5 |
| Shutdown current ISHUTDOWN | VEN ≤ 0.4 V; 2 V ≤ VIN ≤ 5.5 V; TJ = 25°C | typ 0.1 · max 1 uA | 5 |
| Start-up time tSTR | COUT = 1 uF; IOUT = 150 mA; time from EN assertion to (0.98 × VOUT(nom)) | typ 100 us | 5 |
| Enable high (enabled) VHI | Maximum VIN | min 0.9 V | 6 |
| Enable low (disabled) VLO | min 0 · max 0.4 V | 6 | |
| EN pin current IEN | EN = 5.5 V | typ 0.01 uA | 6 |
| Pulldown resistor RPULLDOWN | VIN = 4 V | typ 120 Ω | 6 |
| Output current limit ILIM | VIN = 3.8 V; VOUT = 3.3 V; TJ = –40 to 85°C | min 180 mA | 6 |
| Short-circuit current ISC | VOUT = 0 V | typ 40 mA | 6 |
| Thermal shutdown TSD | Shutdown, temperature increasing | typ 158 °C | 6 |
| Thermal shutdown TSD | Reset, temperature decreasing | typ 140 °C | 6 |
Pins, by the datasheet
5- 1 IN
- Input pin; use a small capacitor from this pin to ground. · p. 3
- 2 GND
- Ground pin. · p. 3
- 3 EN
- Driving EN over 0.9 V turns on the regulator; driving EN below 0.4 V puts it into shutdown mode. · p. 3
- 4 NC
- No internal connection. · p. 3
- 5 OUT
- Regulated output voltage; use a small 1-uF ceramic capacitor to ground for best transient response. · p. 3
Ordering codes, by the datasheet
2- TLV74133PDBVR
- SOT-23 (DBV) · 5 pins; 3000-piece large tape and reel; NIPDAU or SN lead finish. · p. 21
- TLV74133PDBVR.A
- SOT-23 (DBV) · 5 pins; 3000-piece large tape and reel; NIPDAU lead finish. · p. 21
Parts like it
8ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSPX3819M5-L-3-3/TR
SOT-23-5-40℃~+125℃ 1 16V 3.3V 340mV@(500mA) 40uVrms 500mA 70dB 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMaxLinearVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRT9013-33GB
SOT-23-5-40℃~+125℃@(Tj) 1 25uA 3.3V 30uVrms 400mV@(500mA) 5.5V 500mA 50dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRICHTEKVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsXC6219B332MR
SOT-23-5-20℃~+60℃ 1 15uA 280mV@(100mA) 3.3V 300mA 40dB@(1kHz) 7V Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS7A2033PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 10uVrms 140mV@(300mA) 3.3V 300mA 65dB@(100kHz) 6V 8.5uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPLP5907MFX-3.3
SOT-23-51 200mV@(300mA) 2uA 3.3V 300mA 5.5V 51uVrms 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSTLQ015M33R
SOT-23-5-40℃~+125℃ 1 1.4uA 112mV@(150mA) 150mA 3.3V 40dB@(1kHz) 5.5V 75uVrms Fixed Over Current Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Questions
Is there a KiCad symbol and footprint for the TLV74133PDBV?
Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TLV74133PDBV?
SOT-23-5, with 5 pins. Its footprint is drawn on this page.
Where is the TLV74133PDBV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TLV74133PDBV?
JLCPCB lists it as part C471862, with 2,388 in stock; the sellers' links on this page open their listings.
What can replace the TLV74133PDBV?
Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.