
USB LiDAR VL53L9
RemiFM/USB-LiDAR-VL53L9
USB accessory device with VL53L9 Time of Flight sensor (dToF 3D LiDAR) & 6-axis IMU
Texas InstrumentsExtended
-40℃~+125℃@(Tj) 1 1.8V 120uVrms 125mV@(300mA) 300mA 34uA 5.5V 68dB@(100Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
The TLV73318PDBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.8V 120uVrms 125mV@(300mA) 300mA 34uA 5.5V 68dB@(100Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (Regulator_Linear:TLV73318PDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 9,700 are in stock at JLCPCB (part C882824). 4 open-source boards in 4 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage VIN | With respect to GND | min -0.3 · max 6 V | 5 |
| Voltage VEN | With respect to GND; maximum VIN + 0.3 V | min -0.3 V | 5 |
| Voltage VOUT | With respect to GND | min -0.3 · max 3.6 V | 5 |
| Temperature TJ | Operating junction | min -40 · max 150 °C | 5 |
| Temperature Tstg | Storage | min -65 · max 160 °C | 5 |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 V | max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; ±500 V | max 500 V | 5 |
| Input range VIN | min 1.4 · max 5.5 V | 5 | |
| Output range VOUT | min 1 · max 3.3 V | 5 | |
| Output current IOUT | min 0 · max 300 mA | 5 | |
| Enable range VEN | Maximum VIN | min 0 V | 5 |
| Junction temperature TJ | min -40 · max 125 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | DBV (SOT-23), 5 PINS | typ 228.4 °C/W | 5 |
| Junction-to-case (top) thermal resistance RθJC(top) | DBV (SOT-23), 5 PINS | typ 151.5 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DBV (SOT-23), 5 PINS | typ 55.8 °C/W | 5 |
| Junction-to-top characterization parameter ψJT | DBV (SOT-23), 5 PINS | typ 31.4 °C/W | 5 |
| Junction-to-board characterization parameter ψJB | DBV (SOT-23), 5 PINS | typ 54.8 °C/W | 5 |
| Input voltage VIN | min 1.4 · max 5.5 V | 6 | |
| DC output accuracy | TJ = 25°C | min -1 · max 1 % | 6 |
| DC output accuracy | –40°C ≤ TJ ≤ +125°C | min -1.4 · max 1.4 % | 6 |
| Undervoltage lockout UVLO | VIN rising | typ 1.3 · max 1.4 V | 6 |
| Undervoltage lockout UVLO | VIN falling | typ 1.25 V | 6 |
| Line regulation ΔVO(ΔVI) | ΔVI = VIN(nom) to VIN(nom) + 1 | typ 1 mV | 6 |
| Load regulation ΔVO(ΔIO) | ΔIO = 1 mA to 300 mA, DBV package | typ 25 mV | 6 |
| Dropout voltage (1) VDO | VOUT = 0.98 × VOUT(nom), IOUT = 300 mA, 1.8 V ≤ VOUT < 2.5 V, –40°C ≤ TJ ≤ 85°C | max 270 mV | 6 |
| Dropout voltage (1) VDO | VOUT = 0.98 × VOUT(nom), IOUT = 300 mA, 1.8 V ≤ VOUT < 2.5 V, –40°C ≤ TJ ≤ 125°C | max 300 mV | 6 |
| Ground pin current IGND | IOUT = 0 mA | typ 34 · max 60 uA | 6 |
| Shutdown current ISHDN | VEN ≤ 0.35 V, 2.0 V ≤ VIN ≤ 5.5 V, TJ = 25°C | typ 0.1 · max 1 uA | 6 |
| Power-supply rejection ratio PSRR | VOUT = 1.8 V, IOUT = 300 mA, f = 100 Hz | typ 68 dB | 6 |
| Power-supply rejection ratio PSRR | VOUT = 1.8 V, IOUT = 300 mA, f = 10 kHz | typ 35 dB | 6 |
| Power-supply rejection ratio PSRR | VOUT = 1.8 V, IOUT = 300 mA, f = 100 kHz | typ 28 dB | 6 |
| Output noise voltage Vn | BW = 10 Hz to 100 kHz, VOUT = 1.8 V, IOUT = 10 mA | typ 120 uVRMS | 6 |
| EN pin high voltage (enabled) VEN(HI) | min 0.9 V | 6 | |
| EN pin low voltage (disabled) VEN(LO) | max 0.35 V | 6 | |
| EN pin current IEN | VEN = 5.5 V | typ 0.01 uA | 6 |
| Pull-down resistor | VIN = 2.3 V | typ 120 Ω | 6 |
| Output current limit ILIM | min 360 · max 700 mA | 6 | |
| Thermal shutdown Tsd | Shutdown, temperature increasing | typ 160 °C | 6 |
| Thermal shutdown Tsd | Reset, temperature decreasing | typ 140 °C | 6 |

RemiFM/USB-LiDAR-VL53L9
USB accessory device with VL53L9 Time of Flight sensor (dToF 3D LiDAR) & 6-axis IMU


ninjatill/PCB-Capacitive-Touch-Synth
A Raspberry Pi-based synthesizer with capacitive touch keys directly on a PCB.

farhanarrafi/embedded-project-website
UNT Embedded Hardware/Software Design Course Report
Yes. The symbol is Regulator_Linear:TLV73318PDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOT-23-5, with 5 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C882824, with 9,700 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the ME6211C18M5G-N by MICRONE, the RT9078-18GJ5 by RICHTEK and the TPS7A2018PDBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.